SEI BC 0044 OAK User manual

1
Sh 1
SOUTHERN ENTERPRISES INC.
NOTE…This product has been engineered for
easy assembly and constructed for durability
Now please take time to read through
and follow assembly instructions.
3-DRAWER COUNTRY BENCH STYLE NO. BC 0044 OAK
HARDWARE LIST
1. Machine Screw
12PCS
2. Wood Plug 12PCS 3. Large Wood Screw
18PCS
4. Allen Wrench 1PC
5. Barrel Nut 12PCS 6. Wood Dowel
30mm x 8mm,
32PCS
7. Glue 1PC 8. Medium Wood Screw
24PCS
9. Plastic Drawer
Support
3PCS
10. Plastic Drawer Stop
3PCS
11. Plastic Drawer Steady
Frame – Left & Right
3 SETS
12. Small Wood Screw
18PCS
APPLY GLUE INTO HOLES BEFORE WOOD DOWELL GOES INTO POSITION. PLEASE
USE RUBBER-HEAD HAMMER ONLY, WHEN NEEDED.
Please count, identify and compare parts and hardware list to be sure all parts are present. It may
help to divide parts and label them to correspond with part list. Extra hardware may be included.
If any items are missing, please contact our parts/service department at [phone] or in
Dallas [phone]/ 9am – 4pm Mon-Fri Central time. Missing or damaged hardware and/ or
parts will be replaced free of charge. WE DO NOT SELL PARTS. WE DO NOT RECOMMEND
MODIFYING PRODUCT(S) AND WE ARE NOT RESPONSIBLE FOR ANY DAMAGES DUE TO
PRODUCT MODIFICATION(S). If this product has not been purchased from our retail affiliates
(within 9 months), we are under NO obligation to provide parts or replacement
merchandise.Parts will not be available for items arrived fully assembled

Sh 2
2
PARTS LIST
A. Armset (L&R) 1 Set
B. Back Rail Panel 1PC C. Side Apron 2PCS D.Rear Apron 1PC
E. Front Apron 1PC F. Seat Panel 1PC G. Wood Glide 3PCS H. Drawer Rear Panel
3PCS
I. Drawer Bottom Panel
3PCS
J. Drawer Side Panel
6PCS
K. Drawer Front Panel
3PCS
----------------------------------------------------------------------------------------------------------------------------------------------------
Parts will not be available for items arrived fully assembled
PARTS REPLACEMENT FORM
Style No. : BC0044 OAK,
Customer Name PARTS PARTS QUANTITY
LETTER DESCRIPTION NEEDED
_____________________________________ _____________________________________
Street, City, State, Zip Code _____________________________________
_____________________________________ _____________________________________
_____________________________________ _____________________________________
_____________________________________
Please indicate where you purchased this item.
Store/ website/ catalog
_____________________________________
SOUTHERN ENTERPRISES INC. Please indicate color/ size/ style number.
P.O. Box 59996 Dallas, Texas 75229 / /

Sh 3
ASSEMBLE INSTRUCTION
STEP1.
ATTACH THE Plastic Drawer Stop (10) AND Plastic Drawer Steady Frames- Left (11-L)& Right
(11-R).
PLEASE INSERT Small Wood Screw (12) THROUGH Plastic Drawer Stop (10) AND Plastic Drawer Steady
Frames –Left (11-L) & Right (11-R),TO TIGHTEN TO Front Apron (E). see FIG#1
THEN PLEASE INSERT Small Wood Screw (12) THROUGH Plastic Drawer Support (9) TO TIGHTEN TO
REAR-SIDE OF Drawer Rear Panel (H). see FIG#1A
STEP2. ATTACHAprons(C)(D)(E),
PLEASE APPLY GLUE INTO HOLES AND INSERT Wood Dowell (6) INTO HOLES ON BOTH ENDS OF
SideApron(C).
THEN INSERT THE OTHER END OF Wood Dowell (6) INTO HOLES ON Front Apron (E) AND Rear Apron (D).
NOW ALL PARTS BECOME A Apron Storage Frame. see FIG#2
3
STEP3. ATTACH Wood Glide (G) TO Seat Panel (F).
PLEASE INSERT Wood Dowell (6) INTO HOLES ON Wood Glide (G) THEN ATTACH TO HOLES ON Seat Panel (F)
NEXT, PLEASE INSERT Large Wood Screw (3) THROUGH HOLES ON Wood Glide (G) TO TIGHTEN TO
Seat Panel (F). see FIG#3
FIG# 3
FIG#1A
FIG#1
FIG# 2

Sh 4
4
STEP4. ASSEMBLE Seat Panel (F) AND Apron Storage Frame TOGETHER.
PLEASE INSERT Wood Dowell (6) INTO HOLES ON Seat Panel (F), THEN ATTACH THE
Apron Storage Frame ONTO Seat Panel (F) BY THE OTHER END OF Wood Dowell (6)
GOES INTO HOLES ON Rear Apron (D), Front Apron (E).
NEXT, PLEASE INSERT Large Wood Screw (3) THROUGH HOLES OF wood joint block ON EACH Apron
TO TIGHTEN TO Seat Panel (F). THEN ALL PARTS BECOME A Storage Seat. see FIG#4
FIG#4
STEP5A. ATTACH Armset (A) TO Storage Seat
PLEASE INSERT Wood Dowell (6) INTO HOLES ON BOTH Armsets (A),
THEN ATTACH ONE OF THE Armset (A) TO Storage Seat BY THE OTHER END OF Wood Dowell (6)
GOES INTO HOLES ON Rear Apron (D), Front Apron (E). see FIG#5
NEXT, PLEASE INSERT Barrel Nut (5) INTO HOLES ON Rear Apron (D), Front Apron (E).
AND THEN PLEASE INSERT Machine Screw (1) THROUGHHOLESONArmset(A),
SEMI-TIGHTEN Machine Screw (1) TO Barrel Nut (5) TO SECURE Armset (A) TO Storage Seat.
STEP5B. ATTACH Back Rail (B) TO Armset (A)
ATTACHBackRail(B)TOTHEWoodDowell(6)ONArmset(A),
THENPLEASEINSERTBarrelNut(5)INTOHOLESONBackRail(B).
NEXT, PLEASE INSERT Machine Screw (1) THROUGHHOLESONArmset(A),
SEMI-TIGHTEN Machine Screw (1) TO Barrel Nut (5) TO SECURE Back Rail (B) TO Armset (A). see FIG#5
****** DOPULICATE STEP5A & STEP5B FOR THE OTHER Armset.******
STEP6. ASSEMBLE Drawers
PLEASE INSERT Midium Wood Screw (8) THROUGH HOLES ON Drawer Side Panel (J) TO SECURE TO
Drawer Rear Panel (H). THEN PLEASE INSERT Drawer Bottom Pane( I ) INTO GROVE OF BOTH Drawer
Side Panel (J) AND Drawer Rear Panel (H). THEN INSERT Medium Wood Screw (8) THROUGH HOLES ON
Drawer Side Panel (J) TO SECURE Drawer Front Panel (K), Drawer Bottom Pane( I ) SHOULD GOES INTO
GROVE OF Drawer Front Panel (K).THEN TIGHTEN ALL Medium Wood Screw (8) see FIG# 6
STEP 7 INSERT 3 DRAWER TO THE SEAT FRAME. See FIG# 7. THEN CHECK ALL PARTS ARE
CORRECTLY IN POSITION BEFORE TIGHTEN Machine Screw (1) TO Barrel Nut (5) ON STEP 5A, 5B.
INSERT Wood Plug (2) TO BOTH Armsets (A). see FIG# 5

5
Sh 5
FIG# 5
SOUTHERN ENTERPRISES, INC
P.O. Box 59996 Dallas,
T
e
x
as
7
5
22
9
FIG# 6 FIG# 7
YOUR BEAUTIFUL 3-DRAWER COUNTRY BENCH IS FINISHED AND
READY TO USE.
THIS PRODUCT IS NOT INTENDED FOR
COMMERCIAL USE.