SEI HZ862400TX User manual

PO#:
Page 1
HZ862400TX
Hendrik Display-Top Apothecary
Cabinet
Assembly Instructions

1 Quantity
of 1
Top Panel
2 Quantity
of 1
Left Side Panel
3 Quantity
of 1
Right Side Panel
4 Quantity
of 1
Shelf Panel
5 Quantity
of 1
Bottom Panel
6 Quantity
of 1
Middle Panel
7 Quantity
of 1
Back Panel
8 Quantity
of 1
Left Door
9 Quantity
of 1
Right Door
10 Quantity
of 1
Left Adjustable Shelf Panel
11 Quantity
of 1
Right Adjustable Shelf Panel
12 Quantity
of 1
Drawer Face Panel
Page 2
Hendrik Display-Top Apothecary Cabinet
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is
missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the
pictures. Using the incorrect hardware will cause damage.

13 Quantity
of 1
Left Drawer Side Panel
14 Quantity
of 1
Right Drawer Side Panel
15 Quantity
of 1
Drawer Back Panel
16 Quantity
of 1
Drawer Bottom Panel
17 Quantity
of 1
Glass Top
A Quantity
of 16
Cam Bolt
B Quantity
of 16
Cam Lock
C Quantity
of 16
Wood Dowel
Dia. 5/16” x1-1/4”
D Quantity
of 25
Screw Dia. 1/8” x 1/2”L
E Quantity
of 8
Screw Dia. 5/32” x 1L
F Quantity
of 12
Knob
G Quantity
o f 24
Bolts Dia. 5/32” x 1/2”L
H Quantity
o f 2
Magnet Plate
I Quantity
o f 30
Screw Dia. 1/8” x 1/2”L
Page 3

J Quantity
o f 8
Shelf Pin
K Quantity
o f 4
Hinge
L Quantity
o f 2
Magnet
M Quantity
of 2
Tilting Preventing Hardware
N Quantity
of 8
Cotton Mat
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Page 4
Assembly Tool Required
No.2 Phillips Screwdriver
(Not Included)

Page 5
Figure 1
Start with finger to help align Cam Bolts.
Insert Cam Locks (B) into Corresponding
holes on Middle Panel (6).
Screw Cam Bolts (A) into threaded holes
on Shelf Panel (4) and Bottom Panel (5).
Attach Shelf Panel (4) and Bottom Panel
(5) to Middle Panel (6) by inserting Cam
Bolts (A) and Wood Dowels (C) into
corresponding holes until all panels meet.
Tighten Cam Bolts (A) by rotating Cam
Locks (B) clockwise using Phillips
screwdriver.
Cover Cam Locks (B) with Cotton Mat (N)
provided.
Figure 2
Insert Cam Locks (B) into corresponding
holes on Shelf Panel (4) and Bottom
Panel (5).
Screw Cam Bolts (A) into threaded holes
on Left Side Panel (2) and Right Side
Panel (3).
Attach Left Side Panel (2) and Right Side
Panel (3) to Shelf Panel (4) and Bottom
Panel (5) by inserting Cam Bolts (A) and
Wood Dowels (C) into corresponding
holes until all panels meet.
Tighten Cam Bolts (A) by rotating Cam
Locks (B) clockwise using Phillips
screwdriver.
Hendrik Display-Top Apothecary Cabinet
Assembly Instructions

Page 6
Figure 3
Insert Cam Locks (B) into corresponding
holes on Left Side Panel (2) and Right
Side Panel (3).
Screw Cam Bolts (A) into threaded holes
on Top Panel (1).
Attach Top Panel (1) to Left Side Panel
(2) and Right Side Panel (3) by inserting
Cam Bolts (A) and Wood Dowels (C) into
corresponding holes until all components
meet.
Tighten Cam Bolts (A) by rotating Cam
Locks (B) clockwise using Phillips
screwdriver.
Cover Cam Locks (B) with Cotton Mat
(N) provided.
Figure 4
Attach Back Panel (7) to the back of the
unit with Screws (D).
Tighten Screws (D) with Phillips
screwdriver.

Page 7
Figure 5
Attach Drawer Side Panels (13/14) to
Drawer Back Panel (15) using Screws
(E).
Tighten Screws (E) with Phillips
screwdriver.
Insert Drawer Bottom Panel (16) into the
grooves of panels (13/14/15).
Attach Drawer Front Panel (12) to the
assembled unit using Screws (E).
Finally, attach Knobs (F) to the Drawer
Front Panel (12) using Bolts (G).
Tighten Bolts (G) with Phillips
screwdriver.
Figure 6
Attach Hinges (K) to Side Panels and
Door with Screws (I).
Attach Magnet Plates (H) to the doors
with Screws (I).
Attach Knobs (F) to the doors with Bolts
(G).
Tighten Bolts (G) and Screws (I) with
Phillips screwdriver.
Attach Magnets (L) on the assembled
unit using Screw (D).
Insert Shelf Pins (J) into holes on Side
Panels Middle Panel.

Page 8
Figure7
Insert drawers into the unit as shown.
Make sure all slides glide smoothly in and
out.
Insert Adjustable Shelf Panels (10/11) in
the arrows direction.
Figure 8
Place the Glass Top (17) onto Top Panel
(1).

Page 9
Figure 9
Attach two Brackets (M) to back Panel using
Screws (M). Tighten screws (M) using a
Philips screwdriver.
Mark two desired locations on wall in the
same distance as the Brackets (M) on the
back of the unit.
Drill two 3/16" holes on wall.
Insert plastic anchors (M) into the 2 holes on
wall as shown. (When doing this, you will
need a hammer help you).
Then, attach the Brackets (M) to wall using
Screws (M).
Tighten Screws (M) using a Philips screw
driver.
Move this item close to the wall Bracket (M)
and tie in all Brackets (M) with Plastic Straps
(M) as shown in diagram.
Anti-tipping hardware must be used for this
product to avoid tipping and injury.
Figure 10
Now your Hendrik display-top apothecary
cabinet is ready to use.

Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90
days of your receipt of the product. Replacement, if available, will be honored within this time frame.Parts will not be available for items
arriving fully assembled. We do not recommend modifying product(s) and we are not responsible for any damages due to product
modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or
replacement merchandise.
For product issues, please contact Southern Enterprises at 800-633-5096 (toll-free) / 972-869-0111 (Dallas) Mon-Fri 9am – 4pm CST, or
email us at [email protected]. Please ask for customer service representative for issues involving damages or replacement parts.
Please ask for technical assistance representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Page 10
Parts Replacement Form
Customer Service: 1-800-633-5096
[email protected]om
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019