SEI Tilt-Top Drafting Table HO967800TX User manual

Page 1
HO967800TX
Tilt-Top Drafting Table
Assembly Instructions
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
PO#

Page 2
Tilt-Top Drafting Table
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on
clean, padded surface like carpet or blanket. Check that you have all parts indicated. Call
customer service if hardware is missing. Before beginning assembly, carefully study the
diagrams below and sort your hardware according to the pictures. Using the incorrect hardware
will cause damage.
A Quantity
of 1
Left Frame
B Quantity
of 1
Right Frame
C Quantity
of 1
Bar
DQuantity
of 1
Top Frame
1 Quantity
of 16
Flat Washer
2 Quantity
of 16
Bolt Dia 1/4” x 3/4”L
3 Quantity
of 1
Allen Wrench
4 Quantity
of 2
Anti-Slip Hinge
5 Quantity
of 16
Spring Washer
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
Call customer service at 1-800-633-5096
for assistance, questions, or parts.
Assembly Tool Required
No.2 Phillips Screwdriver
Not Included

Page 3
Tilt-Top Drafting Table
Assembly Instructions
Figure 1
Attach left frame (A) and right frame
(B) to bar (C) by using bolts (2),
spring washers (5), and flat washers
(1).
Tighten bolts (2) withAllen wrench (3)
as shown.
Figure 2
Attach assembled unit to top frame
(D) as shown.
32
51
B

Page 4
Figure 3
Insert bolts (2) through spring
washers (5) and flat washers (1) to
connect assembled unit from figure 1
to top frame (D).
Tighten bolts (2) with Allen wrench
(3).
Figure 4
Lay the assembled unit down on its
back as show.
Insert bolts (2) through spring
washers (5) and flat washers (1) to
connectAnti-Slip Hinge (4) to
assembled unit from figure 3 as
shown.
Tighten bolts (2) with Allen wrench
(3).
1
2
2
1

Page 5
Figure 5
Stand the table up.
Now your new tilt-top drafting table is
ready to use.
If the table isn’t steady, please adjust
the adjustable foot level.
Important notice:
Don't hurt fingers when
opening and closing the desktop. Top
panel can drop when it raised to the
top.

Page 6
Please immediately examine this product carefully. Any request for missing parts or damage
replacement must be received within 90 days of your receipt of the product. Replacement, if available,
will be honored within this time frame.Parts will not be available for items arriving fully assembled. We
do not recommend modifying product(s) and we are not responsible for any damages due to product
modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are
under no obligation to provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri
Central time if you have product issues or email us at [email protected]om. Please ask for customer
service representative for issues involving damages or replacement parts. Please ask for technical
assistance representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[email protected]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019