SEI CK1225T User manual

CK1225T
Pyramid End Table
Assembly Instruction
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com

CK1225T
Pyramid End Table
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Screws shown actual size. Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study
the screw diagrams below (SHOWN ACTUAL SIZE).
1 1pc
Top
2 1pc
Front panel
3 1pc
Back panel
4 2pcs
Side panel
5 1pc
Bottom panel
6 4pcs
Leg

A 8pcs
Small Cam Screw
φ6.8 x 36mm
B 8pcs
Small Cam Lock
φ15 x 12mm
C 1pc
Flat Wrench
D 8pcs
Dowel φ8 x 30mm
E 8pcs
Bolts φ1/4” x 2-3/4”
F 25pcs
Screwsφ3.5 x 16mm
G 1pc
Support
H 1pc
Handle-A
I 1pc
Handle-B
J 2pcs
Handle
K 10pcs
Sponge Cushion
Care and Cleaning Instructions:
Before using , wipe with a clean , dry cloth.
Periodically apply furniture wax to renew
The finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Do not return product to store. Please call
manufacturer for assistance, questions or
parts.
Assembly Tool Required
No.2 Phillips Screwdriver

CK1225T
Pyramid End Table
Assembly Instructions
Step 1
Put all parts on a soft surface
to prevent scratches, attach
(H) handle-A to the top (1) by
using screw (F) and phillip
screwdriver to tighten it as
shown
Step 2
Attach (I) handle-B to (2)
front panel by using screw
(F) and phillip screwdriver to
tighten it as shown
Step 3
Screw (A) small cam screw
into (2) front panel as shown

Step 4
Attach (J) handle to (4) left
side panel and (7) right side
panel by using screw (F) and
phillip screwdriver to tighten it
as shown
Step 5
Screw (A) small cam screw
into (3) back panel as shown.
Step 6
Insert (D) dowel into to (4)
side panel as shown.
Then combining (4) side
panel,(2) front panel,(3)back
panel and (5) bottom panel
together by using (A) small
cam screw, (B) small cam
lock, (D) dowel and (K)
sponge cushion as shown.
Please make sure the edges
of bottom panel (5) are
inserted into groove of side
panels.

Step 7
Turn the trunk base up side
down and attach (6) leg to
the bottom of trunk by using
screw (E) as shown
Step 8
Attach (1) top to the trunk
base by using screw and
phillip screwdriver to tighten it
as shown.
Step 9
Open the top (1),attach (G)
support to the top (1) and
trunk base by using (F) screw
as shown. Then put (K)
sponge cushion on (2) front
panel as shown, close the
top and leave the top to drop
down slowly.
.
Customer Service 1-800-633-5096
servi[email protected]
Southern Enterprises, Inc.
2915 Merrell Road
Dallas, Texas 75229

Parts Replacement Form
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/ Website/ Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Missing or damaged hardware and/ or parts will be replaced free of charge. We do not sell parts.
Southern Enterprises Inc. will provide replacement parts for only those items purchased within the last
9 months. If this product has not been purchased from our retail affiliates (within 9 months), we are
under no obligation to provide parts or replacements merchandise. Parts will not be available for items
arriving fully assembled.
Customer Service 1-800-633-5096
[email protected]
Southern Enterprises, Inc.
2915 Merrell Road
Dallas, Texas 75229