SEI KA916000TX User manual

For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-6 -5096
[e-mail]
www.seidal.com
KA916000TX
“MANILA” -DRAWER
KITCHEN STORAGE RACK
Assembly Instructions

A. Left side frame Quantity
of 1
B. Right side frame Quantity
of 1
C. Top Iron frame Quantity
of 1
D.Metal Tube Quantity
of 5
E. Bottom Metal Tube Quantity
of 2
F. Divider Tube Quantity
of 2
G. Bottom shelf frame Quantity
of 1
H. Shelf frame Quantity
of 2
J. Wood panel Quantity
of 2
K. Wood top panel Quantity
of 1
L.Wicker basket frame Quantity
of
M. Wicker bottom panel Quantity
of
1．
．．
．Long Bolt Quantity
of 20
1/4”*1-1/4”
2.Short Wood screw Quantity
of 12
4.0*1/2”L
3．
．．
．Allen Wrench Quantity
of 1
4．
．．
．Wall brackets Quantity
of 2
5．
．．
．Wall anchor Quantity
of 2
6．
．．
．Nylon restraint strap Quantity
of 2
7.Long Wood screw Quantity
of 2
4.0*1”L
Care and Cleaning In truction :
Before using , wipe with a clean , dry cloth. Avoid
rubbing or scratching the surface with rough or
abrasive objects.
For replacement parts or questions, please
Call Customer Service at 1-800-6 -5096
Do not return product to store, please call
Manufacturer for assistance, questions or Parts.
A embly Tool Required
No.2 Phillip Screwdriver (Not Included)
“
MANILA
”
-
DRAW
ER KITCHEN STORAGE RACK
Parts List
Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing
hardware. Do not return to store/retailer. Screws shown in actual size. Using a screw that is too long will
cause damage. Before beginning assembly, separate each type of screw. Carefully study the screw
diagrams below (SHOWN ACTUAL SIZE). You may receive extra hardware with your unit.

Figure 1
Assembly Instructions:
Unpack and lay parts on clean,
padded surface like carpet or blanket.
Check that you have all parts
indicated on the front page .
Please insert 2pcs Long bolt (1)
through holes on Side panel(A & B) to
attach 1pcTop Iron frame (C) to Side
frame(A & B).
Insert 18pcs Long bolt (1) through
holes on Side frame(A & B) to
connect 5pcs Metal Tube (D) & 2pcs
Divider Tube (F) & 2pcs Bottom Metal
Tube(E) to side frame (A & B).
Figure 2
Put 1pc wood top panel(K) onto the
side frame(A & B) & Top Iron
frame(C) & Metal Tube(D), Insert
4pcs Short Wood screw(2) through
holes on Top Iron frame(C) & Metal
Tube(D) to attach 1pc Wood top panel
(K) onto Iron frame(C) & Metal
Tube(D) by Tool Required No.2
Phillips Screwdriver (Not Included).
Put 2pcs wood panel(J) onto the
Metal Tube(D), Insert 8pcs short
Wood screw(2) through holes on
Metal Tube(D) to attach 2pcs Wood
panel (J) onto Metal Tube(D) by Tool
Required No.2 Phillips Screwdriver
(Not Included).
Place 1pc Bottom Shelf frame(G)
onto the Bottom Metal Tube(E).
Place 2pcs Shelf frame (H) onto the
inner frame of the rack to follow the
indication
“MANILA” -DRAWER KITCHEN STORAGE RACK
Assembly Instructions

Figure 3
Put the Wicker bottom panel (M) into
wicker basket (L) by hands
Then Put the complete ba ket
onto Shelf-Frame (G & H)
Figure 4
When properly installed. this
hardware can provide protection
against the unexpected tipping of
furniture.
Drill 2pcs holes in wall, insert 2pcs
wall anchors(56) into hole in wall.
Insert 2pcs long wood screw(7)
through holes on Wall brackets(4)
into wall anchors(5) to attach wall
brackets(4) onto wall anchors(5).
Lace an end of the 2pcs nylon
restraint strap (6) down through
bracket. bring both ends together
and slide the beaded end of the strap
through the key hole shaped slot on
the other end. pull down on the
beaded end until it snap-locks into
the keyhole.
“MANILA” -DRAWER KITCHEN STORAGE RACK
Assembly Instructions

Ple
as
e
im
me
dia
tel
y
ex
am
ine
thi
s
pro
du
ct
car
efu
lly.
An
y
req
uest for missing parts or damage replacement must be received within 90 days of your receipt of the product.
Replacement, if available, will be honored within this time frame. Parts will not be available for items arriving fully
assembled. e do not recommend modifying product(s) and we are not responsible for any damages due to
product modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are under
no obligation to provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central time
if you have product issues or email us at [e-mail]. Please ask for customer service representative for
issues involving damages or replacement parts. Please ask for technical assistance representative for any issues
with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[email protected]om
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019