SEI Martinique HE4292R0TX User manual

HE4292R0TX
Martinique Entry
Bench/Storage
Assembly Instruction
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
Max weight capacity: 250 lbs.

Tool List: 3/16" drill bit, drill, tape measure and pencil .
HE4292R0TX
Martinique Entry Bench/Storage
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using a screw that is too long will cause damage. Before beginning assembly,
separate each type of screw. Carefully study the screw diagrams below.
1 1pc
Seat Frame
2 1pc
Bottom Shelf Frame
3 1pc
Left Leg
4 1pc
Right Leg
5 2pcs
Back Leg
6 1pc
Back Panel
7 2pcs
Scroll
8 1pc
Back Top Frame
9 2pcs
Wooden Support Panel
10 1pc
Top Shelf
11 2pcs
Hook
12 1pc
Cushion Seat
A 14pcs
Screw 1/4″x5/8”
B 10pcs
Screw 1/4″x1-1/2”
C 2pcs
Screw 1/4″x1”
D 24pcs
Washer
E 4pcs
Screw ∮4mm x 3/4”
F 2pcs
Screw ∮4mm x 2”
G 2pcs
Plastic Anchor
H 2pcs
Screw ∮4mm x 1”
I 1pc
Wrench
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew the
finish on wood part.Avoid rubbing or scratching
the surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.Do
not return product to store. Please call
manufacturer for assistance, questions or
parts.
Assembly Tool Required
No.2 Phillips Screwdriver

HE4292R0TX
Martinique Entry Bench/Storage
Assembly Instructions
1 screw MUST BE directly
mounted into a wall stud. Wall
anchor is not needed when
mounting into a wall stud.
Step 1: Attach left leg (3),
right leg (4) to seat frame (1)
and bottom shelf frame (2) by
using screw (A), screw (B)
and washer (D) as shown.
Step 2: Attach back leg (5) to
seat frame (1) and bottom
shelf frame (2) by using screw
(B) and washer (D) as shown.
Inserting back panel (6) into
back leg (5) by using screw
(A), screw (B) and washer (D)
as shown.
Figure 1
Figure 2

Step 3: Attach back top frame
(8) to wooden support panel
(9) by using screw (B) &
washer (D) as shown.
Then attach it to top shelf (10)
by using screw (C), (H) as
shown.
Step 4: Inserting back top
frame (8) into back panel (6)
as shown.
Then attach hook (11) to back
panel (6) by using screw (A)
and washer (D) as shown.
Then attach scroll (7) to
seat
frame (1) and back panel (6)
by using screw (A) & washer
(D) as shown.
Figure 3
Figure 4

Step 5: Put cushion seat (12)
on the seat frame (1) and fix
by using screw (E) as shown.
Step 6: Locate the bench at a
comfortable place, measure
the wall and mark the width
and height as shown.
Measure the wall and mark
the location of the center of
each of wall mounting holes
as Figure 6 shown.
Using the level, make sure
that two marks are level on
the wall.
Using the power drill and
3/16″drill bit, drill two
3/16″holes on wall as shown.
Make sure not to drill into
electrical wiring or plumbing
pipes.
Figure 5
Figure 6
Drill two 3/16”
Holes into wall.

Step 7: Insert plastic anchors
( G ) into the holes of wall as
shown. (When doing this, you
will need a hammer help you).
Using the phillips head
screwdriver, install screw (F) into
each of the anchors (G) as
shown.
G
F
8
F
G
Figure 7

Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame.Parts will not be available for items arriving fully assembled. We do not recommend
modifying product(s) and we are not responsible for any damages due to product modification(s). If
damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to
provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri
Central time if you have product issues or email us at [e-mail]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalo
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service
1-800-633-5096
[email protected]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019