SEI CM501500TX User manual

Page | 1
PO：
CM501500TX
Cardamon 3-Drawer Sideboard
Assembly Instructions
For assistance with assembly, contact:
Southern Enterprises, Inc.
Customer Service: 1-800-633-5096
[email protected]om
www.se
ifurniturestore
.com

Page | 2
Cardamon 3-Drawer Sideboard
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface
like carpet or a blanket. Check that you have all the parts indicated. Call customer service if any hardware is missing.
Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures. Using
the incorrect hardware will cause damage.
A.
Quantity
of 1
Top Panel
B.
Quantity
of 4
Leg
1
Quantity
of 8
Bolt
2
Quantity
of 8
Spring Washer
3
Quantity
of 8
Flat Washer
4
Quantity
of 1
Allen Wrench
5
Quan
tity
of 4
Bracket
6
Quantity
of 4
Screw Ø 1/8” x 1-1/2”L
7
Quantity
of 4
Screw Ø 1/8” x 5/8”L
8
Quantity
of 4
Anchor
9
Quantity
of 2
Plastic strap
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew the finish.
Avoid rubbing or scratching the surface with rough or abrasive objects.
For replacement parts or questions,
please call SEI customer service at
1-800-633-5096.
Assembly Tool Required:
No.2 Phillips Screwdriver (Not Included)

Page | 3
A
Figure 1
Attach Legs (B) to Top Panel (A).
A
1
2
3
4
Figure 2
Secure Legs (B) with Top Panel (A) using
Bolts (1), Spring Washers (2) and Flat
Washers (3).
Tighten bolts with Allen Wrench (4).
Cardamon 3-Drawer Sideboard
Assembly Instructions

Page | 4
Figure 3
Turn the assembled unit over, pull
the drawer out of Top Panel (A).
Use Phillips Screwdriver (not
included) to unscrew the
pre-attached knob (inside of drawer
face.)
Figure 4
Attach the knob to outside of drawer
face using Phillips Screwdriver (not
included).

Page | 5
5
7
Figure 5
Attach Brackets (5) to back
Panel using Short Screws (7).
Tighten Screws (7) using Philips
screwdriver (not included).
Mark two desired locations on
wall.
Drill two 3 16" holes on wall.
Insert Plastic Anchors (8) into the
2 holes on the wall. (When doing
this, you will need a hammer help
you).
Then attach the Brackets (5) to
wall using Long Screws (6).
Tighten Screws (6) using Philips
screw driver (not included).
Figure 6
Move the Sideboard close to the
fastened wall Brackets
(5) and tie in
both Brackets (5) with Plastic Straps
(9) as shown in diagram.
Warning: Anti-tipping hardware
must be used for this product to
avoid tipping and injury.

Page | 6
Figure 7
Now the assembly of your
Cardamon 3-Drawer is complete
and ready to use.

Page | 7
Please immediately examine this product carefully. Any request for missing parts or damage replacement must be
received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame.
Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s) and we are not
responsible for any damages due to product modification(s). If damages or missing parts are not reported within 90 days
of your receipt, we are under no obligation to provide parts or replacement merchandise.
For product issues, please contact Southern Enterprises at 800-633-5096 (toll-free) / 972-869-0111 (Dallas), Mon-Fri
9am – 4pm CST, or email us at [e-mail]. Please ask for customer service representative for issues involving
damages or replacement parts. Please ask for technical assistance representative for any issues with product and
assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Customer Service: 1-800-633-5096
[email protected]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Parts Replacement Form