SEI BC402800TX User manual

PO#:
Page 1
BC402800TX
Larimore Drawer/Basket
Storage Bench - Black
Assembly Instructions

1 Quantity
of 1
Top Panel
2 Quantity
of 1
Bottom Frame
3 Quantity
of 1
Left Side Panel
4 Quantity
of 1
Right Side Panel
5 Quantity
of 2
Middle Panel
6 Quantity
of 1
Cross Panel
7 Quantity
of 1
Baffle
8 Quantity
of 2
Side Baffle
9 Quantity
of 1
Back Panel
10 Quantity
of 3
Drawer Face Panel
11 Quantity
of 3
Drawer Back Panel
12 Quantity
of 3
Left Drawer Side Panel
Page 2
Larimore Black Bench W/Drawer/Basket Storage
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on
clean, padded surface like carpet or blanket. Check that you have all parts indicated. Call customer
service if hardware is missing. Before beginning assembly, carefully study the diagrams below and
sort your hardware according to the pictures. Using the incorrect hardware will cause damage.
Color 1
Color 2
Color 3

13 Quantity
of 3
Drawer Bottom Panel
14 Quantity
of 3
Right Drawer Side Panel
15 Quantity
of 1
Cushion
16 Quantity
of 3
Basket Bottom
17 Quantity
of 3
Basket Frame
A Quantity
of 20
Cam Bolt
B Quantity
of 20
Cam Lock
C Quantity
of 23
Wood Dowel
Dia 8mm x 30mm
D Quantity
of 6
Handle
E Quantity
of 6
Bolt
Dia 5/32" x 1-1/4"L
F Quantity
of 34
Screw
Dia 1/8" x 1"L
G Quantity
of 20
Pan Head Screw
Dia 1/8" x 1/2"L
H Quantity
of 8
Adhesive Pad
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Page 3
Assembly Tool Required
No.2 Phillips Screwdriver
(Not Included)

Page 4
Figure 1
I nsert Cross Panel (6) into grooves on Middle
Panel (5), as shown.
Figure 2
Start turning with finger to help align Cam
Bolts.
Insert Cam Locks (B) into holes on Cross
Panel (6).
Screw Cam Bolts (A) into holes on Left Side
Panel (3) and Right Side Panel (4).
Attach assembled unit on Figure 1 to Left Side
Panel (3) and Right Side Panel (4) by inserting
Cam Bolts (A) into corresponding holes until
all panels meet.
Tighten by rotating Cam Locks (B) clockwise
with Phillips screwdriver.
5
6
5
Larimore Drawer/Basket Storage Bench - Black
Assembly Instructions
3
4
A
B

Page 5
Figure 3
Start with finger to help align Cam Bolts.
Insert Cam Locks (B) into holes on assembled
unit on Figure 2.
Screw Cam Bolts (A) into holes on the top side
of Bottom Frame (2).
Attach assembled unit on Figure 2 to Bottom
Frame (2) by inserting Cam Bolts (A) and
Wood Dowels (C) into corresponding holes
until all panels meet.
Tighten by rotating Cam Locks (B) clockwise
with Phillips screwdriver.
Cover Cam Locks (B) withAdhesive Pads (H)
provided.
Figure 4
Start with finger to help align Machine Screws.
Attach Baffle (7) to Side Baffles (8) with
Screws (F).
Connect Baffle (7) and Side Baffles (8) to Top
Panel (1) with Screws (F) and Wood Dowels
(C).
Tighten Screws (F) with Phillips screwdriver.
A
B
C2
H
C1
F
78
8

Page 6
Figure 5
Start with finger to help align Cam Bolts.
Insert Cam Locks (B) into holes on assembled
unit on Figure 4.
Screw Cam Bolts (A) into holes on Top Panel
(1).
Attach Top Panel (1) to assembled unit on
Figure 4 by inserting Wood Dowels (C) and
Cam Bolts (A) into corresponding holes until all
panels meet.
Tighten by rotating Cam Bolts (A) clockwise
with Phillips screwdriver.
Figure 6
Start with finger to help align Screws.
Attach Back Panel (9) on assembled unit with
Screws (G).
Tighten Screws (G) with Phillips screwdriver.
A
B
C
1

Page 7
Figure 7
Start with finger to help align Screws.
Attach Left Drawer Side Panels (12), Right
Drawer Side Panels (14) and Drawer Back
Panels (11) with Screws (F).
Insert Drawer Bottom Panels (13) into grooves
of Drawer Panels (11), (12), and (14).
Attach Drawer Face Panels (10) to assembled
drawers using Screws (F).
Finally, attach Handles (D) to Drawer Face
Panels (10) using Bolts (E).
Tighten screws and bolts with Phillips
screwdriver.
Figure 8
Insert drawers into their corresponding places,
assuring the glides ride smoothly.
D
E
F
co lo r 1
co lo r 2
co lo r 3

Figure 9
Attach Basket Bottoms (16) into Basket
Frames (17).
Insert Baskets into their corresponding
spaces.
Place the Cushion (15) onto the top panel.
Figure 10
Now your Larimore Drawer/Basket Storage
Bench is ready to use.
Page 8
15
17
16

Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90
days of your receipt of the product. Replacement, if available, will be honored within this time frame.Parts will not be available for items
arriving fully assembled. We do not recommend modifying product(s) and we are not responsible for any damages due to product
modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or
replacement merchandise.
For product issues, please contact Southern Enterprises at 800-633-5096 (toll-free) / 972-869-0111 (Dallas) Mon-Fri 9am – 4pm CST, or
email us at [email protected]. Please ask for customer service representative for issues involving damages or replacement parts.
Please ask for technical assistance representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Service: 1-800-633-5096
[email protected]om
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Parts Replacement Form