SEI KA981700TX User manual

For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-6 -5096
[e-mail]
www.seidal.com
Page 1
KA981700TX
METAL & RATTAN STORAGE
RACK
Assembly Instructions

A. Back Panel Quantity
of 1
B. Bottom Left Side Panel Quantity
of 1 C. Bottom Right Side Panel
Quantity
of 1
D. Wire Shelf Quantity
of 1
E. Small Wire Shelf Quantity
of 1 F. Shelf-Frame Quantity of 1
G. Metal Tube Quantity
of 2
H. front Metal Cross Bar Quantity
of 1 J. back Metal Cross Bar Quantity of 1
K. Divider Tube Quantity
of 2
L. Upper Left Side Panel Quantity
of 1 M. Upper Right Side Panel Quantity of 1
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth. Avoid
rubbing or scratching the surface with rough or
abrasive objects.
For replacement parts or questions, please
Call Customer Service at 1-800-6 -5096
Do not return product to store, please call
Manufacturer for assistance, questions or Parts.
Assembly Tool Required
No.2 Phillips Scre driver (Not Included)
Page 2
KA981700TX---METAL & RATTAN STORAGE RACK
Parts List
Please review all parts and hardware before disposing of any packaging. Call Customer
Service if missing hardware. Do not return to store/retailer. Using a screw that is too long will
cause damage. Before beginning assembly, separate each type of screw. Carefully study the
screw
diagrams below
.
You may receive extra
h
ardware with your
unit.

N. Left Side Iron bar Quantity of 2 O. Right Side Iron bar Quantity
of 2
P. Cup holder Quantity
of 3
Q．Wine holder Quantity
of 2
R. Short Tube Quantity
of 2
S. Long Tube Quantity
of 1
T. Hook Quantity
of 7 U. Wood panel Quantity
of 1
V. Small Wood panel Quantity
of 1
W. rattan basket Quantity
of 2
X. rattan bottom panel Quantity
of 2
1
.
Bolt Quantity
of 18
1/4”*1-1/4”L
2. Short Bolt Quantity
of 32
1/4”*1/2”L
3．
．．
．Wood screw Quantity
of 8
4.Spherical Regulator Quantity
of 6
5. Allen Wrench Quantity
of 1
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth. Avoid
rubbing or scratching the surface with rough or
abrasive objects.
For replacement parts or questions, please
Call Customer Service at 1-800-6 -5096
Do not return product to store, please call
Manufacturer for assistance, questions or Parts.
Assembly Tool Required
No.2 Phillips Scre driver (Not Included)
Page
KA981700TX---METAL & RATTAN STORAGE RACK
Parts List
Please review all parts and hardware before disposing of any packaging. Call Customer
Service if missing hardware. Do not return to store/retailer. Using a screw that is too long will
cause damage. Before beginning assembly, separate each type of screw. Carefully study the
screw
diagrams below
.
You may receive extra
h
ardware with your
unit.

Figure 1
Assembly Instructions: Unpack
and lay parts on clean, padded
surface like carpet or blanket.
Check that you have all parts
indicated on the front page.
Turn over the front Metal Cross Bar
(H), then Insert 6pcs short bolt
(2) through holes on cup
holder(P) to attach pcs cup
holder（P）to front Metal Cross Bar
(H).
Figure 2
Insert 2pcs Bolts (1) through holes on
Left Side Panel (B) to attach
Wire
Shelf (D) To Side Panel (B).
Insert 2pcs Bolts (1) through holes on
Left Side Panel (B) to attach Small
Wire Shelf (E) To Left Side Panel(B)
Insert 2pcs Bolts (1) through holes on
Left Side Panel (B) to attach both
Metal Cross Bar (H,J) To Left Side
Panel(B).
Insert 1pc Bolts (1) through holes on
Left Side Panel (B) to attach Metal
Tube(G) To Left Side Panel(B).
Page 4
KA981700TX---METAL & RATTAN STORAGE RACK
Assembly Instructions

Figure 3
Same as “Figure 2” attach the
parts(C).
Insert 4pcs Bolts (1) through holes on
both Metal Cross Bars(H,J) & Wire
Shelf (D) to connect Divider Tube (K)
with the arrow pointing down in
between, and then tighten bolt(1) by
Wrench (5).
Insert 2pcs short Bolts(2) through
holes on small wire shelf(E) attach
small wire shelf(E) to Divider Tube (K),
by Wrench (5).
Figure 4
Insert 8pcs short Bolts(2) through
holes on wine holder(Q) to attach
wine holder(Q) to both Bottom
side panel(B,C) ,by Wrench (5).
Place Shelf frame (F) onto the
inner frame of the rack to follow
the indication
Page 5

Figure 5
Please attach Back Panel (A) onto
both Bottom side panel (B,C) and
then please tighten both parts
using Short Bolts (2) by Wrench
(5).
Please insert Short Bolts(2)
through holes on Side Irons bar
(N,O) to attach to both Bottom
Side Panels(B,C), Tighten bolt
using by Wrench(5).
Insert Short Bolts(2) through
holes on Upper Side panel(L,M)
to attach both Upper Side
Panels(L,M) to Back panel(A),
Tighten bolt using by Wrench(5).
Insert Bolts(1) through holes on
both Upper Side panel(L,M) to
attach Metal Tube(G) to both
Upper Side panel(L,M), Tighten
bolt using by Wrench(5).
Page 6

Figure 6
Please insert 2pcs Spherical
Regulator (4) through holes on
side of both Upper Side Panels
(L,M) to tighten 1pc Long tube (S)
by hands
Please insert 4pcs Spherical
Regulator (4) through holes on
side of both Side Iron (N,O) to
tighten 2pcs short tubes (R) by
hands
Put 1pc Small wood panel(V) onto
the both Upper Side Panel (L,M) &
Metal tube(G), Tighten using 4pcs
Wood screw( ) by Tool Required
No.2 Phillips Screwdriver (Not
Included).
Put 1pc wood panel(U) onto the
both Bottom Side Panel (B,C) &
Metal tube(G), Tighten using 4pcs
Wood screw( ) by Tool Required
No.2 Phillips Screwdriver (Not
Included).
Figure 7
Place rattan Bottom Panels(X)
into rattan Baskets(W).
Page 7

Figure 8
Place completed baskets onto
Shelf-Frames (F) and Wire Shelf(D).
Hang pcs Hooks(T) onto Tube(S).
Hang 4pcs Hooks(T) on
to both
Tubes(R).
Figure 9
No your MET
AL & RATTAN
STORAGE RACK is ready to
use.
20 lb. max
loading eight on
small shelf
40 lb. max
loading eight on
large shelf
20 lb. max loading eight
for
each basket and each ire
shelf.
Page 8

Please immediately examine this product carefully. Any request for missing parts or damage replacement must
be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this
time frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying
product(s) and we are not responsible for any damages due to product modification(s). If damages or missing
parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement
merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at [e-mail]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[email protected]om
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019