SEI TORRES HUTCH HO270600TX User manual

For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-6 -5096
[e-mail]
www.seidal.com
TORRES HUTCH
HO270600TX- BLACK
Assembly Instructions
PO#11906

A Quantity
of 24
CAM BOLT（￠6.5*5mm
B Quantity
of 28
WOOD DOWEL（￠8*0mm）
C Quantity
of 24
CAM LOCK￠（￠14.8*11.5mm）
D Quantity
of 2
CONNECTION PLATE（L45*W12*D1mm）
E Quantity
of 4
FLAT HEAD SCREW（￠ *12mm）
F Quantity
of 24
COVER（￠16mm）
G Quantity
of 2
WALL AHCHOR
H Quantity
of 2
ANTI-TIP CHAIN
I Quantity
of 4
ANTI-TIP BRACKET
J Quantity
of 2
SCREW（￠4*16mm）
K Quantity
of 2
TORRES HUTCH
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study the
screw diagrams below . You may receive extra hardware with your unit.

SCREW（￠4*25mm）
(1) Quantity
of 1
TOP PANEL
(2) Quantity
of 1
BASE
(3) Quantity
of 1
LEFT SIDE PANEL
(4) Quantity
of 1
RIGHT SIDE PANEL
(5) Quantity
of 1
LEFT VERTICAL PANEL
(6) Quantity
of 1
RIGHT VERTICAL PANEL
(7) Quantity
of 1
UPPER SHELF PANEL
(8) Quantity
of 1
MIDDLE SHELF PANEL
(9) Quantity
of 2
UPPER VERTICAL PANEL
(10) Quantity
of 1
SHELF PANEL
(11) Quantity
of 1
LEFT BACK PANEL
(12) Quantity
of 1
RIGHT BACK PANEL
TORRES HUTCH
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study the
screw diagrams below . You may receive extra hardware with your unit.

Care and Cleanin Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish . Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
Call Customer Service at 1-800-6 -5096
Do not return product to store, please call
Manufacturer for assistance, questions or
Parts.
Assembly Tool Required
No.2 Phillips Screwdriver (Not Included)
Fi ure 1
INSERT CAM LOCK(C) INTO
PREDRILLED HOLES ON 1 PC SHELF
PANEL (10).
SCREW CAM BOLT(A) INTO
PREDRILLED HOLES ON LEFT
VERTICAL PANEL(5). ATTACH SHELF
PANEL (10) TO LEFT VERTICAL
PANEL(5) BY SLIPPING WOOD
DOWEL(B) & CAM BOLT(A) INTO
CORRESPONDING PREDRILLED
HOLES UNTIL SHELF PANEL (10) &
LEFT VERTICAL PANEL(5) MEET.
SECURE BY ROTATING CAM LOCK (C)
COUNTERCLOCKWISE WITH
PHILLIPS SCREWDRIVER.
Fi ure 2
INSERT UPPER SHELF PANEL (7)
INTO ASSEMBLED UNIT IN THE STEP
1.
TORRES HUTCH
Assembly Instructions

Fi ure 3
INSERT CAM LOCKS(C) INTO
PREDRILLED HOLES ON
ASSEMBLED UNIT IN THE STEP 2.
SCREW CAM BOLT(A) INTO
PREDRILLED HOLES ON RIGHT
VERTICAL PANEL (6). ATTACH RIGHT
VERTICAL PANEL (6) TO ASSEMBLED
UNIT IN THE STEP 2 BY SLIPPING
WOOD DOWEL(B) & CAM BOLT(A)
INTO CORRESPONDING PREDRILLED
HOLES UNTIL RIGHT VERTICAL
PANEL (6) & ASSEMBLED UNIT IN
THE STEP 2 MEET. SECURE BY
ROTATING CAM LOCK (C)
COUNTERCLOCKWISE WITH
PHILLIPS SCREWDRIVER.
Fi ure 4
INSERT CAM LOCKS(C) INTO
PREDRILLED HOLES ON
ASSEMBLED UNIT IN THE STEP .
SCREW CAM BOLT(A) INTO
PREDRILLED HOLES ON BASE (2).
ATTACH BASE (2) TO ASSEMBLED
UNIT IN THE STEP BY SLIPPING
WOOD DOWEL(B) & CAM BOLT(A)
INTO CORRESPONDING PREDRILLED
HOLES UNTIL BASE (2) &
ASSEMBLED UNIT IN THE STEP
MEET. SECURE BY ROTATING CAM
LOCK (C) COUNTERCLOCKWISE
WITH PHILLIPS SCREWDRIVER.
TORRES HUTCH
Assembly Instructions

Fi ure 5
INSERT CAM LOCK(C) INTO
PREDRILLED HOLES ON MIDDLE
SHELF PANEL (8). SCREW CAM
BOLT(A) INTO PREDRILLED HOLES
ON ASSEMBLED UNIT IN THE STEP 4.
ATTACH MIDDLE SHELF PANEL (8)
TO ASSEMBLED UNIT IN THE STEP 4
BY SLIPPING WOOD DOWEL(B) &
CAM BOLT(A) INTO
CORRESPONDING PREDRILLED
HOLES UNTIL MIDDLE SHELF PANEL
(8) & ASSEMBLED UNIT IN THE STEP
4 MEET. SECURE BY ROTATING CAM
LOCK (C) COUNTERCLOCKWISE
WITH PHILLIPS SCREWDRIVER.
Fi ure 6
INSERT CAM LOCKS(C) INTO
PREDRILLED HOLES ON
ASSEMBLED UNIT IN THE STEP 5.
SCREW CAM BOLT(A) INTO
PREDRILLED HOLES ON LEFT SIDE
PANEL ( ). ATTACH LEFT SIDE PANEL
( ) TO ASSEMBLED UNIT IN THE
STEP 5 BY SLIPPING WOOD
DOWEL(B) & CAM BOLT(A) INTO
CORRESPONDING PREDRILLED
HOLES UNTIL LEFT SIDE PANEL ( ) &
ASSEMBLED UNIT IN THE STEP 5
MEET. SECURE BY ROTATING CAM
LOCK (C) COUNTERCLOCKWISE
WITH PHILLIPS SCREWDRIVER.
REPEAT WITH RIGHT SIDE PANEL
(4).
TORRES HUTCH
Assembly Instructions

Fi ure 7
INSERT CAM LOCKS(C) INTO
PREDRILLED HOLES ON UPPER
VERTICAL PANELS (9). SCREW CAM
BOLT(A) INTO PREDRILLED HOLES
ON ASSEMBLED UNIT IN THE STEP 6.
ATTACH UPPER VERTICAL PANELS
(9) TO ASSEMBLED UNIT IN THE
STEP 6 BY SLIPPING WOOD
DOWEL(B) & CAM BOLT(A) INTO
CORRESPONDING PREDRILLED
HOLES UNTIL UPPER VERTICAL
PANELS (9) TO ASSEMBLED UNIT IN
THE STEP 6 MEET. SECURE BY
ROTATING CAM LOCK (C)
COUNTERCLOCKWISE WITH
PHILLIPS SCREWDRIVER.
Fi ure 8
INSERT TO THE LEFT BACK
PANEL(11) & RIGHT BACK PANEL
(12) INTO ASSEMBLED UNIT IN THE
STEP 7.
TORRES HUTCH
Assembly Instructions

Fi ure 9
INSERT CAM LOCKS(C) INTO
PREDRILLED HOLES ON
ASSEMBLED UNIT IN THE STEP 8.
SCREW CAM BOLT(A) INTO
PREDRILLED HOLES ON TOP PANEL
(1). ATTACH TOP PANEL (1) TO
ASSEMBLED UNIT IN THE STEP 8 BY
SLIPPING WOOD DOWEL(B) & CAM
BOLT(A) INTO CORRESPONDING
PREDRILLED HOLES UNTIL TOP
PANEL (1) & ASSEMBLED UNIT IN
THE STEP 5 MEET.
SECURE BY ROTATING CAM LOCK (C)
COUNTERCLOCKWISE WITH
PHILLIPS SCREWDRIVER.
STICK COVERS (F) TO THE CAM
LOCKS (C) SURFACE.
USE CONNECTION PLATES (D) & FLAT
HEAD SCREWS (E) CONNECT HUTCH
& DESK TOGETHER.
TORRES HUTCH
Assembly Instructions
D
D

Fi ure 10
Fi ure 11
NOW YOUR NEW DESK READY TO
USE.

Fi ure 12
ATTACH BRACKET(I) TO THETOP
PANEL(1) WITH SCREW(J) FOR
BRACKET
DRILL 1/4 PILOT HOLES IN NEAR
PROXIMITY OF THE BRACKET(I)
ATTACHED TO THE TOP PANEL(1)AND
TAP THE PLASTIC ANCHOR(G) INTO
WALL.
FASTEN BRACKET(I) USING
SCREW(K) FOR WALL INTO THE
PLASTIC ANCHOR(G).
Fi ure 13
MOVE THIS ITEM TO THE FASTENED
WALL BRACKET(I) AND
TIE IN
BOTH BRACKET(I) WITH PLASTIC
CHAIN(H) AS SHOWN IN DIAGRAM.
TORRES HUTCH
Assembly Instructions
J
I
H
Wal l