SEI WS471500TX User manual

Page | 1
WS471500TX
Dionne Leaning Mirror
Assembly Instructions
For assistance with assembly, contact:
Southern Enterprises, Inc.
Customer Service: 1-800-633-5096
[email protected]om
www.seifurniturestore.com
PO#:

Page | 2
Dionne Leaning Mirror
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or a blanket. Check that you have all parts indicated. Call customer service if any hardware is
missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the
pictures. Using the incorrect hardware will cause damage.
1
.
Quantity
of 1
Mirror
A.
Quantity
of 3
Plastic Anchor
s
B
.
Quantity
of 3
Screws 1/8” x 1-1/2”L
C.
Quantity
of 1
Screws 1/8” x 5/8”L
D.
Quantity
of 2
Brackets
E.
Quantity
of 1
Plastic Strap
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew the finish. Avoid
rubbing or scratching the surface with rough or abrasive
objects.
For replacement parts or questions, please
call SEI customer service at 1-800-633-5096.
Tool List: electric drill, 3/16" drill bit, tape measure, hammer, and pencil.
Assembly Tool Required:
No.2 Phillips Screwdriver(Not Included)

Page | 3
Note: Drilled holes or plastic anchors not required when
mounting to stud, use screws only. We do not supply hardware
for mounting on concrete walls.
Figure 1
Find a desired location and mark 2
locations for screws on wall.
Drill two 3/16" holes.
Insert Plastic Anchors (A) into the holes
on wall.
Tap Anchors with Hammer (not included)
as needed.
Using the Phillips screwdriver (not
included), install Screws (B) into the
anchors (A) and any remaining holes.
Turn the Screws (B) until there is a gap of
approximately 1/8" between the head of
the screw and the wall.
Figure 2
Hang mirror onto Screws (B) and verify
mirror is resting securely.
Now your Dionne Leaning Mirror is
ready to use!
WALL

Page | 4
If you prefer to lean this product on the wall, please follow below instructions.
Figure 3
Mark one desired location on wall.
Drill a 3/16" hole.
Insert Plastic Anchor (A) into hole,
tapping lightly with hammer (not
included) as needed.
Make sure plastic anchor is flush with
wall.
Attach Bracket (D) to wall using Screw
(B).
Tighten Screw (B) with Philips
screwdriver (not included).
Figure 4
Attach Bracket (D) to back panel using
Screw (C).
Tighten Screw (C) with Philips
screwdriver (not included).
D
D

Page | 5
Figure 5
Move this item close to wall bracket.
Tie both brackets together with Plastic
Straps (E).
Anti-tipping hardware must be used
for this product to avoid tipping and
injury.
Now your Dionne Leaning Mirror is
ready to use!

Page | 6
Please immediately examine this product carefully. Any request for missing parts or damage replacement must be
received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame.
Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s) and we are not
responsible for any damages due to product modification(s). If damages or missing parts are not reported within 90 days
of your receipt, we are under no obligation to provide parts or replacement merchandise.
For product issues, please contact Southern Enterprises at 800-633-5096 (toll-free) / 972-869-0111 (Dallas), Mon-Fri
9am – 4pm CST, or email us at serv[email protected]. Please ask for customer service representative for issues involving
damages or replacement parts. Please ask for technical assistance representative for any issues with product and
assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts escription Quantity Needed
Parts Replacement Form
Customer Service: 1-800-633-5096
[email protected]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019