SEI Mission HO880900TX User manual

HO8808R0TX—Mahogany finish
HO880900TX –Cherry finish
Mission Computer Desk-Mahogany
Assembly Instruction
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
PO#11693

HO8808R0TX—Mahogany finish / HO880900TX –Cherry finish
Mission Computer Desk-Mahogany
Parts List
Please review all parts and hardware before disposing of any packaging. Call Customer
Service if missing hardware. Do not return to store/retailer. Using a screw that is too
long will cause damage. Before beginning assembly, separate each type of screw.
Carefully study the screw diagrams below. You may receive extra hardware with your unit.
A 1pc
Wood Top
B 1pc
Left Panel
C 1pc
Middle Left Panel
D 1pc
Middle Right Panel
E 1pc
Right Panel
F 4pcs
Decor Panel
G 1pc
Bottom Panel
H 1pc
Across Panel
I 1pc
Front Low Panel
J 1pc
Back Across Panel
K 1pc
Back Frame
L 1pc
Front frame
M1 1pc
Right Back Panel
M2 1pc
Left Back Panel
N 1pc
Door

O 1pc
Keypad Board
P 4pcs
Drawer Side Panel
Q 2pcs
Drawer Back Panel
R 2pcs
Drawer Front Panel
S 3pcs
Drawer Shelf
T 2pcs
Drawer Side Panel
U 1pc
Drawer Back Panel
V 1pc
Drawer Front Panel
W 1pc
Drawer Front Panel
X 1pc
Drawer Left Side Panel
Y 1pc
Drawer Right Side Panel
Z 1pc
Drawer Back Panel
AA 1pc
Drawer Shelf
1 40pcs
Bolt 1/4”x 1-1/4”
2 14pcs
Wood Dowel 5/16” x1-1/4”
3
22pcs
SCREW ∮1/8”x1/2”

4
1pc
Knob
5 5pcs
Knob
6 12pcs
Bolts 5/32”x 3/4”
7 4pcs
Screw 1/8”x1/2”
8 1pc
Magnet
9 3pcs
Plastic Drawer Stopper
10 3pcs
Screw 1/8”x1/2”
11 2pcs
Aluminum
12 32pcs
Screw 5/32”x1”
13 10pcs
Wood Cap
14 1pc
Wrench 1/4”
15 16pcs
Spring washer 1/4”
16 16pcs
Flat washer1/4”x1/2”
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
The finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Do not return product to store. Please call
manufacturer for assistance, questions or
parts.
Assembly Tool Required
No.2 Phillips Screwdriver

HO8808R0TX—Mahogany finish / HO880900TX –Cherry finish Mission
Computer Desk-Mahogany
Assembly Instructions
Step 1:
PLEASE DO NOT OVER-TIGHTEN
CAMBOLTS. PLEASE STOP WHEN
YOU FEEL TIGHT
Attach 3pcs P astic Drawer
Stopper (9) to the Across Pane /
Front frame (H/L) with 3pcs
Wood Screw (10) ,
Step 2:
Connect the Decor Panel
(F)with the left side panel(B)by
using 1pcs wood Dowel(2) and
1pcs bolt (1), tighten by using
the Wrench(14) .
Connect the left/Middle side
panel(B/C)with the bottom
panel(G)by using 4pcs wood
Dowel(2) and 7pcs bolt
(1),tighten by using the
Wrench(14) as shown.

Step 3:
Connect the Decor Panel
(F)with the Right side
panel(E)by using 1pcs wood
Dowel(2) and 1pcs bolt (1),
tighten by using the Wrench(14)
Connect the Right /Middle side
panel(D/E)with the Across
Panel (H/I/J)by using 6pcs
wood Dowel(2) and 6pcs bolt
(1),tighten by using the
Wrench(14) as shown.
Step 4:
Connect the Wood Top (A), the
Back Frame (K) and Drawer
Frame (L) with 4pcs Bolt (1)
and 4pcs Spring washer (15)
4pcs Flat washer (16)
Wrench(14) as shown..

Step 5:
Attach the unit assembled at
step2/step3 to the unit
assembled at step4 with16pcs
bolt (1) and 16pcs Spring
washer (15) 16pcs Flat washer
(16) by using the Wrench(14)
as shown.
Step6:
Connect the Decor Panel
(F)with the left /Right side
panel(B/E)by using 2pcs wood
Dowel(2) and 2pcs bolt (1),
tighten by using the Wrench(14)
Step7:

Connect the 1pc Right Back
Panel (M1) and 1pc Left Back
panel (M2) to the unit with
20pcs Wood Screw (3).
Connect the Back Frame (K)
with the Right/Left Partition
Board (B/E) by using 2pcs Bolt
(1), tighten by using the
Wrench(14)
Step8:
Assemble the Medium drawer
(W/X/Y/Z/AA) by using 8pcs
Wood Screws (12).
Fix the Handle (5) to the
Drawer Front Panel (W) with
2pcs Bolt (6) by using the
Screwdriver.

Step9:
Assemble the Medium drawer
(P/Q/R/S) by using 8pcs Wood
Screws (12).
Fix the Handle (5) to the
Drawer Front Panel (R) with
2pcs Bolt (6) by using the
Screwdriver.
Step10:
Assemble the Medium drawer
(T/V/U/S) by using 8pcs Wood
Screws (12).
Fix the Handle (5) to the
Drawer Front Panel (V) with
2pcs Bolt (6) by using the
Screwdriver.

Step11:
Fix the Magnet (8) to the Left
Partition Board (C) with 2pcs
Wood Screw (3) by using the
Screwdriver.
Fix the Handle (4/5) to the
Door/ Keypad Board (N/O) with
4pcs Bolt (6) by using the
Screwdriver.
Connect the Door (N) with the
Left Side Panel (B) by using
4pcs Wood Screw (7), tighten
the screws with screwdriver.
Put the Drawers into the right
position.
Step12:
Insert 10pcs Wood Cap (13) to
the Left and Right Side Panel to
Cover the holes.

Parts Rep acement Form
Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame.Parts will not be available for items arriving fully assembled. We do not recommend
modifying product(s) and we are not responsible for any damages due to product modification(s). If
damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to
Customer Information
Name
Address
City/State/Zip Code
Phone Number
P ease indicate where you purchased this item: Store/Website/Cata og
P ease indicate co or/size/sty e number:
Sty e No Parts Letter Parts Description Quantity Needed
Parts Rep acement Form

provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri
Central time if you have product issues or email us at [e-mail]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
P ease contact the retai er that you purchased from for returns.
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell
, Texas
75019