SEI HZ1020R0TX User manual

For assistance with assembly, contact:
Southern Enterprises, Inc.
Customer Service 1-800-633-5096
[email protected]om
wwww.seidal.com
Supports up to 100Lb
Fold- Away Bar
HZ1020R0TX- Walnut
HZ1021R0TX- Black
Assembly Instructions

Suggested tools: Phillip head screw driver, power drill, 3/16” drill bit, 24”
level, and a tape measure. Unit needs to be hung on wall stud for more
security and stability.
A Quantity
of 1
Top Panel
B Quantity
of 1
Left Door
C Quantity
of 1
Right Door
D Quantity
of 1
Left Panel
E Quantity
of 1
Right Panel
F Quantity
of 1
Top Shelf
G Quantity
of 1
Bottom Shelf
H Quantity
of 2
Drawer
I Quantity
of 1
Middle Panel
J Quantity
of 1
Base
K Quantity
of 1
Top Back Panel
L Quantity
of 1
Middle Back Panel
M Quantity
of 1
Lower Back Panel
Assembly Tool Required
No.2 Phillips Screwdriver (Not Included)
HZ1020R0TX
-
W
alnut
/
HZ1021R0TX
-
B
lack
Fold-Away Bar
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on
clean, padded surface like carpet or blanket. Check that you have all parts indicated. Call customer service
if hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your
hardware according to the pictures. Using the incorrect hardware will cause damage.

1 Quantity
of 10
Cam Bolt
2 Quantity
of 10
Cam Lock
3 Quantity
of 10
Wood Dowel
4 Quantity
of 4
Cam Bolt
5 Quantity
of 4
Long Machine Screw
6 Quantity
of 4
Nut
7 Quantity
of 12
Wood Screw
8 Quantity
of 26
Phillip Screw
9 Quantity
of 2
Wall Anchor
10 Quantity
of 2
Wood Screw
11 Quantity
of 2
Knob
12 Quantity
of 2
Bolt
13 Quantity
of 1
Flat Washer
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish .Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call customer service at 1-800-633-5096.
Assembly Tool Required
No.2 Phillips Screwdriver (Not Included)
HZ1020R0TX
-
W
alnut
/HZ1021R0TX
-
B
lack
Fold-Away Bar
Hardware List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on
clean, padded surface like carpet or blanket. Check that you have all parts indicated. Call customer service
if hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your
hardware according to the pictures. Using the incorrect hardware will cause damage.

Figure 1
Attach top shelf (F) and bottom
shelf (G) to middle panel (I) by
using cam bolts (1), cam locks (2),
and wood dowels (3) as shown.
Turn the cam locks clockwise to
secure panels in place.
Figure 2
Attach left panel (D) and right panel
(E) to top shelf (F) and bottom shelf
(G) by using cam bolts (1), cam
locks (2), and wood dowels (3) as
shown.
Turn the cam locks clockwise to
secure panels in place.
HZ1020R0TX
-
W
alnut
/HZ1021R
0TX
-
B
lack
Fold-Away Bar
Assembly Instructions

HZ1020R0TX
-
WALNUT/HZ1021R0TX
-
BLAC
K
Figure 3
Attach top panel (A) and base (J) to
left panel(D) and right panel (E) by
using cam bolts (1), cam locks(2)
wood dowels(3),long bolts(5) and
flat washer (6) as shown.
Figure 4
Attach left door (B) and right
door(C) to top panel (A) and base
(J) by using wood screws (7) as
shown.
HZ1020R0TX
-
W
alnut
/HZ1021R0TX
-
B
lack
Fold-Away Bar
Assembly Instructions

Figure 5
Attach top back panel (K), middle
back panel (L) and lower back
panel (M) to the back of the unit by
using Phillip screws (8) as shown.
Figure 6
Please mount at least 1 screw
into a wall stud. Wall anchor is
not needed when screwing
directly into a wall stud.
Measure the wall and mark the
location of the center of
each mounting holes.
Using the level, make sure that
all marks are level on the wall.
Using power drill and
3/16_drill bit, drill two 3/16_ holes
through the wallboard at the
mounting hole marks.
HZ1020R0TX
-
W
alnut
/HZ1021R0TX
-
B
lack
Fold-Away Bar
Assembly Instructions

Figure 7
Attach knobs (11) to left door (B)
and right door(C) by using 2 pcs
bolt (12),then, attach to the wall by
using wall anchors (9), wall screws
(10) and flat washers (13) as
shown.
Insert drawers (H) as shown.
HZ1020R0TX
-
WALNUT/HZ1021R0TX
-
BLACK
FOLD-AWAY BAR
Assembly Instructions

Please immediately examine this product carefully. Any request for missing parts or damage replacement must
be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this
time frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying
product(s) and we are not responsible for any damages due to product modification(s). If damages or missing
parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement
merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at [e-mail]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Customer Service 1-800-633-5096
[email protected]om
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Parts Replacement Form