SEI HZ487400TX User manual

For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[e-mail]
www.seifurniturestore.com
Page 1
HZ487400TX
Javu Storage Tower
Assembly Instructions

A Quantity
of 1
Back Frame
B Quantity
of 1
Left Side Frame
CQuantity
of 1
Right Side Frame
DQuantity
of 3
Metal Tube
EQuantity
of 4
Metal Shelf Frame
F Quantity
of 3
Wood Shelf Panel
G Quantity
of 3
Large Wicker Basket
H Quantity
of 1
Small Wicker Basket
J Quantity
of 4
Basket Bottom Panel
Page 2
Javu Storage Tower
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like
carpet or a blanket. Check that you have all parts indicated. Call customer service if any hardware is missing.
Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures.
Using the incorrect hardware will cause damage.

1 Quantity
of 8
Long Bolt ：Ø1/4”×1-1/4” L
2 Quantity
of 22
Short Bolt ：Ø1/4”×1/2” L
3Quantity
of 12
Wood Screw: 4.0×1/2” L
3Quantity
of 1
Allen Wrench
4 Quantity
of 2
Long Wood Screw ：4.0×1” L
5 Quantity
of 2
Wall Anchor
6 Quantity
of 2
Wall Brackets
7 Quantity
of 2
Plastic Strap
Care and cleaning instructions:
Before use, wipe with a clean, dry cloth.
Avoid rubbing or scratching the surface with rough or
abrasive objects.
For replacement parts or questions, please
Call SEI customer service at 1-800-633-5096
Assembly Tool Required
No.2 Phillips Screwdriver (Not Included)
Tool ist: 3/16" Drill Bit, Drill, Tape Measure and Pencil.
Page 3

Figure 1
.
Attach Right Side Frame (C) to Back
Frame (A).
Insert 4pcs Long Bolt (1) through
holes on Back Frame (A) to attach
Right Side Frame (C) to Back Frame
(A), tighten by using Allen Wrench
(4).
Figure 2
Attach Left Side Frame (B) to Back
Panel (A).
Insert 4pcs Long Bolt (1) through
holes on Back Frame (A) to attach
Left Side Frame (B) to Back Frame
(A), tighten by using Allen Wrench
(4).
Page 4
Javu Storage Tower
Assembly Instructions

Figure 3
Slowly push Metal Tube(D) to both
Side Frame (B & C) by hands
Insert 2pc Short Bolt (2) through
holes on Metal Tube (D) to attach
Metal Tube(D) to both Side Frame (B
& C) byAllen Wrench (4).
Figure 4
Slowly push the Wood Shelf Panel
(F) into the both Side Frame(B & C)
by hand
Insert 4pcs Wood Screw (3) through
holes on both Side Frame (B & C) to
attach Wood Shelf Panel (K) to both
Side Frame (B & C) by Tool
Required - No.2 Phillips Screwdriver
(Not Included).
Page 5

Figure 5
Slowly push Metal Tube(D) to both
Side Frame (B & C) by hands
Insert 2pc Short Bolt (2) through
holes on Metal Tube (D) to attach
Metal Tube(D) to both Side Frame (B
& C) byAllen Wrench (4).
Figure 6
Slowly push the Wood Shelf Panel
(F) to the both side Frame (B & C)
and Back Frame (A) by hands
Insert 4pcs Wood Screw (3) through
holes on Metal Tube (D) and Back
Frame (A) to attach Wood Shelf
Panel (F) to Metal Tube (D) and
Back Frame (A) by Tool Required -
No.2 Phillips Screwdriver (Not
Included).
Page 6

Figure 7
Slowly push Metal Tube(D) to both
Side Frame (B & C) by hands
Insert 2pc Short Bolt (2) through
holes on Metal Tube (D) to attach
Metal Tube(D) to both Side Frame (B
& C) byAllen Wrench (4).
Figure 8
Slowly push the Wood Shelf Panel
(F) onto the both Side Frame(B & C)
and Back Panel(A) by hands
Insert 4pcs Wood Screw (3) through
holes on Metal Tube (D) and Back
Frame (A) to attach Wood Shelf
Panel (F) to Metal Tube (D) and
Back Frame (A) by Tool Required -
No.2 Phillips Screwdriver (Not
Included).
.
Page 7

Figure 9
Slowly push Metal Shelf Frame(E)
onto both Side Frame (B & C) by
hands
Insert 4pc Short Bolt (2) through
holes on Metal Shelf Frame(E) to
attach Metal Shelf Frame(E) to both
Side Frame (B & C) by Allen Wrench
(4)
Figure 10
Slowly push Metal Shelf Frame(E) to
both Side Frame (B & C) by hands
Insert 4pcs Short Bolt (2) through
holes on Metal Shelf Frame (E) to
attach Metal Shelf Frame (E) to both
Side Frame (B & C) by Allen Wrench
(4)
.
Page 8

Figure 11
Slowly push Metal Shelf Frame(E) to
both Side Frame (B & C) by hands
Insert 4pcs Short Bolt (2) through
holes on Metal Shelf Frame(E) to
attach Metal Shelf Frame(E) to both
Side Frame (B & C) by Allen Wrench
(4)
Figure 12
Please slide one side of Basket
Bottom Panel (J) all the way down
into the bottom of Large Wicker
Basket (G) by hand.
.
Figure 13
Then slowly push the other side of
Basket Bottom Panel (J) into the
bottom of Large Wicker Basket (G)
by hand.
.
Page 9

Figure 14
Please slide one side of Basket
Bottom Panel (J) all the way down
into the bottom of Wicker Basket (H)
by hand.
Figure 15
Then slowly push the other side of
Basket Bottom Panel (J) into the
bottom of Wicker Basket (H) by
hand.
Figure 16
Put the complete baskets (H)(G)
onto the Metal Shelf frame as
shown.
Page 10

Figure 17
Find a desired location. Mark 2
locations for screws on wall
One screw (for each unit) must be
attached directly into a wall stud.
Wall anchor is not needed when
mounting to wall stud.
Drill one of the marking 3/16" hole
(for each unit).
Figure 18
Insert Plastic Anchors (5) into the
holes on wall as shown.(When doing
this, you will need a hammer to help
you)
Figure 19
Using the Phillips head screwdriver,
install Screw (4) through holes on
Wall Brackets (6) into Wall Anchors
to attach Wall Brackets (6) onto Wall
Anchors (5).
Page 11

Figure 20
Move this item close to the fastened
wall brackets and tie in brackets and
side frame with Plastic Straps (7) as
shown in diagram.
Check to make sure the strap is
securely laced and locked to the
brackets.
Figure 21
Now your Javu Storage Tower is
ready to use
Page 12

Please immediately examine this product carefully. Any request for missing parts or damage replacement must be
received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time
frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s)
and we are not responsible for any damages due to product modification(s). If damages or missing parts are not
reported within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central time
if you have product issues or email us at serv[email protected]. Please ask for customer service representative for
issues involving damages or replacement parts. Please ask for technical assistance representative for any issues
with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019