SEKURYX CK4-HP104C User manual

TECHNICAL SPECIFICATIONS WHAT’S IN THE BOX
NOTICE
VIDEO
Format DisplayPort, HDMI
Max. Pixel Clock 248 MHz
Input Interface (4) DisplayPort 20-pin,
(4) HDMI 19-pin
Output Interface (1) DisplayPort 20-pin,
(1) HDMI 19-pin
Resolution Up to 4K
(3840x2160@30Hz)
DDC 5 volts p-p (TTL)
Input Equalization Automatic
Input Cable Length Up to 20 ft.
Output Cable Length Up to 20 ft.
Data Rate 1.65 Gbps
USB
Input Interface (8) USB Type B
Output Interface (2) USB 1.1 Type A for KM
Devices
Emulation USB 1.1 and USB 2.0
Compatible
CAC Congurable USB 2.0 Port
AUDIO
Audio Input (4) 3.5mm stereo audio
Audio Output (1) 3.5mm stereo audio
CONTROL
Front Panel Front panel SELECT buttons
OTHER
Power External 100-240 VAC/
12VDC3A @ 36W
Dimensions 12.57” W x 1.76” H x 6.69” D
Weight 4.2 lbs
Approvals NIAP PP 4.0, UL, CE, ROHS
Compliant
Operating Temp. +32 to +104°F (0 to +40°C)
Storage Temp. -4 to 140°F (-20 to +60°C)
Humidity Up to 80% (no
condensation)
VIDEO Q-TY DESCRIPTION
CK4-HP104C 1Secure 4-Port, SH DP/HDMI
KVM Switch with CAC
12VDC3A 1
12V DC, 3A power adapter
with center-pin positive
polarity.
1Quick Start Guide
The information contained in this document is
subject to change without notice. SEKURYX makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and tness for particular purpose.
SEKURYX will not be liable for errors contained
herein or for incidental or consequential damages
in connection with the furnishing, performance or
use of this material. No part of this document may
be photocopied, reproduced, or translated into
another language without prior written consent from
SEKURYX, Inc.
Full manual link is
https://www.sekuryx.com/documents-niap4/
DESIGNED
AND MADE
IN THE USA
[email protected]
(877) SEK-URYX
CK4-HP104C
Secure 4-Port, SH DP/HDMI
KVM Switch with CAC Port
QUICK START GUIDE

EDID LEARN HARDWARE INSTALLATION
The KVM is designed to learn the connected
monitor’s EDID upon power up. In the event of
connecting a new monitor to the KVM, a power
recycle is required.
The KVM will indicate to the user the EDID learn
process by ashing the front panel’s LEDs. Port one
green and push button blue LEDs will both begin
to ash for about 10 seconds. When the LEDs stop
ashing, the EDID learn process is done.
If the KVM has more than one video board (such
as dual-head and quad-head models), then the unit
will continue to learn the EDIDs of the connected
monitors and indicate the progress of the process
by ashing the next port selection green and push
button blue LEDs respectively.
The monitor must be connected to the video output
connector located in the console space at the back
of the KVM during the EDID learn process.
If the read EDID from the connected monitor is
identical to the current stored EDID in the KVM then
the EDID learn function will be skipped.
1. Ensure that power is turned off or disconnected from the unit and the computers.
2. Use DisplayPort or HDMI cables to connect the DisplayPort or HDMI output ports from each computer to the
corresponding DP/HDMI IN ports of the unit.
3. Use a USB cable (Type-A to Type-B) to connect a USB port on each computer to the respective USB ports
of the unit.
4. Optionally, for CAC models, connect a CAC (Common Access Card, Smart Card Reader) to the CAC port in
the user console interface.
5. Optionally, connect a stereo audio cable (3.5 mm to 3.5 mm) to connect the audio output of the computer(s)
to the audio in ports of the unit.
6. Connect monitor(s) to the DP/HDMI OUT console port of the unit using DisplayPort or HDMI cable(s).
7. Connect a USB keyboard and mouse in the two USB console ports.
8. Optionally, connect stereo speakers to the audio out port of the unit.
9. Finally, power on the secure KVM switch by connecting a 12-VDC power supply to the power connector, and
then turn on all the computers.
Note: The computer connected to port 1 will always be selected by default after power up.
Note: You can connect 4 computer to the 4 port KVM.
— DP/HDMI IN
— USB K/M IN
— USB CAC IN
— AUDIO IN
— DP/HDMI OUT
— USB K/M OUT
— USB CAC OUT
— AUDIO OUT
CONSOLE
12VDC AUDIO
K/M
AUDIO AUDIO AUDIO AUDIO
K/M K/M K/M K/M
CAC
CAC CAC CAC CAC
IN-1IN-2IN-3IN-4
CK4-HP104C
DP/HDMIIN1DP/HDMIIN2DP/HDMIIN3DP/HDMIIN4DP/HDMIOUT