sellmore SOLO User manual
Jan van Gentstraat 123-F
1171 GK Badhoevedorp
The Netherlands
Tel. +31(0) 20 659 26 92
www.sellmore.nl
mail@sellmore.nl
SOLO
… an “invisible” electronic lock with multiple usages…
STAND-ALONE ELECTRONIC RFID LOCK FOR:
Shops and Retail:
Glass cabinets and
display cases,
supply cupboards,
staff lockers
Hospitals:
Storage cabinets,
cupboards and
lockers for medical
equipment or
private belongings
Offices:
Filing cabinets,
kitchen and
stationery
cupboards
Schools:
Staff and
student lockers,
equipment
and storage
cupboards
Clubs:
Staff and visitor
lockers, glass
display cabinets,
equipment and
storage cupboards
Jan van Gentstraat 123-F
1171 GK Badhoevedorp
The Netherlands
Tel. +31(0) 20 659 26 92
www.sellmore.nl
mail@sellmore.nl
QUALITY
SOLO strives to provide customers with high-quality products. Excellent customer service as
well as fast lead times and excellent customer service.
The manufacturer of Solo became ISO 9001:2008 certified on Sept. 15th, 2015.
.
5 YEAR WARRANTY
SOLO products are built to the highest standard in Europe using mainly European
components due to this quality and assurance SOLO can offer a 5 Year Warranty.
With this 5-year warranty, products will be repaired or replaced free of charge.
The SOLO 5-year warranty covers the repair or replacement of the product once returned
to the manufacturer. This excludes 3rd party damage and transportation costs.
APPLICATIONS
Jan van Gentstraat 123-F
1171 GK Badhoevedorp
The Netherlands
Tel. +31(0) 20 659 26 92
www.sellmore.nl
mail@sellmore.nl
APPLICATIONS
TECHNOLOGY
Solo locks are available in the following different
models:
Bluetooth
RFID 125 kHz: Em4102/Em4200
RFID 125 kHz: Em4450/Hitag
RFID 13,56 mHz: all Mifare chiSolo
Power 3V / 12V open/close
BLUETOOTH –ADMINISTRATION
Access control via App
Administration via App
Log-file via App
Access control via user grouSolo
Please follow the instructions at the app
POWER 3V / 12V INSTRUCTIONS
+ open (brownwire)
+ close (blackware)
0V GND (blue)
Default cable: 1,5 m
Customized cable length with plugs possible
Metal casing on request
With / without: door closer switcher
RFID OPTIONAL FEATURES
Door open alarm
GYM –free locker mode
Close manually/automatically –bolt
Jan van Gentstraat 123-F
1171 GK Badhoevedorp
The Netherlands
Tel. +31(0) 20 659 26 92
www.sellmore.nl
mail@sellmore.nl
RFID programming instructions
Activating the programming card
Initializing / activating a programming card:
1.
Press the push-button on the rear side.
2.
The lock will make a ticking sound (signal). Hold the programming card on the lock within 3 seconds
of hearing this signal.
3.
Two short ascending tones will confirm that the programming card has been saved successfully.
Initializing a key
Initializing the key card or chip key:
1.
Please place the programming card onto the lock.
2.
The lock will make a ticking sound (signal). Place the key card or chip key onto the lock within
3 seconds of hearing this signal.
3.
Two short ascending tones will confirm that initialization was successful.
4.
The lock can now be opened using the key card or the chip key.
Deleting the key card or chip key
1.
Please place the programming card onto the lock.
2.
The lock will make a ticking sound (signal). Place the key card or chip key onto the lock within
3 seconds of hearing this signal.
3.
Two short ascending tones will confirm that deletion was successful.
Delete all keys
To delete all keys at once, place the programming card onto the lock for several seconds.
ACCESSORIES ACCESSORIES
3050 - Battery 3040s - external antenna (125 KHz)
The 3 volt lithium battery has life-span of 10 years
with the 125 KHz and 3 years with the 13,56 MHz
technology. The battery has enough power to
open the lock more than 30,000 times. When the
battery starts to run out, the lock will no longer lock
and a contin- uous tone will sound for 15 seconds,
at this point change the battery.
The flat external antenna is used whenever the
distance from the key is greater than 25 mm or if
the lock is fixed onto a rear panel. Cable: 1,5m
3041 - round mini antenna (125 KHz)
With a hole of 7,5mm diameter, this round
Metal kit mini antenna can be placed in several varia-
With a stamp in the metal door, the internal
antenna of the SOLO and S0L013 lock will work
through the metal door.
tions.
3010 - Programming card
3060 glass set This card can be used to give or deny access
This set is similar to the metal kit and consists of an
additional adhesive glue tape. Depending on
where the force is applied, the double-sided sticky
tape on an untreated surface will hold up to 25 kg
or 45 kg (551 bs or 991 bs), depending on the
direction of pull.
as well as to change the software settings. The
same programming card can be as- signed to
multiple locks within a shop / area for example.
3030 - Key card
3051s - External power supply The range is approx. 30 mm cross wood or
The cable is 1,5 m long and can be plugged
directly into the lock. Each converter can supply a
maximum of 5 locks. Please note: Never use
transformers and batteries at the same time!
glass. Program up to 50 different keys per lock.
3053s –Spacer plate 3020 –Chip key
This chip key is extremely small with a diame-
A square shaped spacer plate to prevent cables
from being crushed. Measurements: 60 x 60 x 5 mm ter of approx. 30 mm. It can be easily at- tached to
a key ring. The maximum range is 20 mm.
Jan van Gentstraat 123-F
1171 GK Badhoevedorp
The Netherlands
Tel. +31(0) 20 659 26 92
www.sellmore.nl
mail@sellmore.nl
Installation with the latch 3071
Equipped with a mounting bracket and a spring,
this latch gives a maximum comfort during assem-
bly based on the 3D adjustable fixing.
The mounting tolerances are within 6 mm, and the
spring is used as a pusher for a door.
3068z - Sliding doors
This black metal locking device has a predeter-
mined breaking point of 35 kg. The flexible pin al-
lows a tolerance of +/-3 mm.
3070 - mini locking device for electronic locks
Features:
Small measurements and nice design
Easy to install
Screw provided
No predetermined breaking point
Tolerance +/- 1,0 mm
12,5 mm diameter
Installation with the latch 3069
This locking device is made of ZAMAK, a robust zinc
aluminium alloy and the predetermined breaking
point is 35 kg.
The integrated pusher will automatically open light
drawers and cabinet doors. The flexible pin allows a
tolerance of +/- 1 mm.
Jan van Gentstraat 123-F
1171 GK Badhoevedorp
The Netherlands
Tel. +31(0) 20 659 26 92
www.sellmore.nl
mail@sellmore.nl
TROUBLESHOOTING
Lock is open and the keys are not working:
The battery low alarm was activated.
Please insert a new battery.
Key is not working:
Is there any sound? If so, please try to activate
the key with the programming card.
No sound: Try to find the right position at the furni-
ture. The keys have a higher range if you place
them fast at the right point than moving slowly.
I lost my key:
Delete all keys with the programming card.
Activate all keys again.
The programming card does not work:
Do you have a second card?
If not, please unscrew the locks, press the button
on the backside and teach the lock the pro-
gramming card again.
Motor runs, lock stays locked:
Maybe there is some pressure on the bolt in the
lock.
Move the door in all possible directions and try it
again.
Press the door in and use your key again.
Adjust the locking devices after such a problem.
No sound with any card:
Use a flat iron part (not a screwdriver) and break
up the furniture. The rated breaking point at the
latch will save the furniture.
SECURITY ADVICE
Fixing the locks
Tighten with care and man-
ually. Please avoid using any
strong electrical power.
Store
Whenever you prepare locks in advance,
please remove the battery immediately. Insert the
battery again when you have the minimum
distance.
Distance in battery mode
To avoid disturbances between the locks,
please keep a minimum distance of 10 cm.
< 10 cm >
Disposal
All waste electrical and elec-
tronic equipment must be collected
separately from general rubbish to
be reused or recycled.
Table of contents
