Sencor SMF 1010BK User manual

- 1 - 01/2021 Copyright © 2021, Fast ČR, a.s.
EN Milk frother
Translation of the original manual
SMF 1010BK

- 2 - 01/2021 Copyright © 2021, Fast ČR, a.s.
EN Milk frother
Important safety instructions
READ CAREFULLY AND STORE FOR FUTURE USE.
General warnings
■This appliance is intended to be used in household only.
■This product may be used by children 8 years of age and older
and by persons with physical or mental impairments or by
inexperienced persons, if they are properly supervised or have
been informed about how to use the product in asafe manner
and understand the potential dangers.
■Children must not play with the product.
■Cleaning and maintenance performed by the user must not be
performed by unsupervised children.
■Do not disassemble the product (with the exception of the
battery compartment cover). There is a risk of injury if the
appliance is incorrectly assembled.
■Do not place any objects into the product.
■Do not submerge the motor unit in water or in any other liquid.
This could result in irreparable damage to the product.
■Prevent contact with hot surfaces.
■Usetheproductonlyinaccordancetotheinstructionscontained
in this user'smanual. The product is intended only for frothing
milk. Do not use it for any other purposes than those intended.
Never use this product for processing solid, frozen or other
types of food.
Safety instructions related to batteries:
■Do not throw batteries into afire. Do not charge batteries that
are not intended for recharging. There is arisk of the appliance
exploding.

- 3 - 01/2021 Copyright © 2021, Fast ČR, a.s.
■Never disassemble, solder or weld the battery. There is arisk of
the appliance exploding.
■Regularly checkthecondition ofthe battery. Leakingelectrolyte
may damage the product.
■When not using the product for an extended period of time,
remove the batteries. In the event that the electrolyte leaks,
first put on a pair of protective gloves. Clean the battery
compartment and contacts using adry cloth.
■Keep the batteries out of children's reach. Children may put
the battery in their mouth and swallow it. In the event that the
battery is swallowed, immediately seek professional medical
help.
■Never use old and new batteries at the same time.
■When inserting the batteries, heed correct polarity.
■Always insert only new batteries of the same type into the
product.
■In the event that the batteries are flat, take them out of the
product and dispose of them according to valid local legal
codes. Do not throw the batteries into communal household
waste.

- 4 - 01/2021 Copyright © 2021, Fast ČR, a.s.
SMF 1010BK
1
2
3
4
5
A
&

- 5 - 01/2021 Copyright © 2021, Fast ČR, a.s.
B
C

- 6 - 01/2021 Copyright © 2021, Fast ČR, a.s.
EN Milk frother
User'smanual
■ Prior to using this appliance, please read the user'smanual thoroughly, even in cases
where you have previously familiarised yourself with the operation of similar types
of appliances. Only use the appliance in the manner described in this user'smanual.
Keep this user'smanual in asafe place where it can be easily retrieved for future use.
■ We recommend saving the original cardboard box, packaging material, purchase
receipt and responsibility statement of the vendor or warranty card for at least the
duration of the legal liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance in the original box
from the manufacturer.
DESCRIPTION OF THE APPLIANCE
A1 On/Off button
A2 Battery compartment cover
A3 Motor unit with battery
compartment
A4 Stainless steel whisk
A5 Stand
BEFORE FIRST USE
■ Before first use, take the product and its accessories out of the packaging material
and remove all promotional labels and stickers. Check that neither the product nor
any of its parts is damaged. Wipe the product using aclean, dry cloth.
Battery Installation
■ Before first use or in the event of reduced performance, it is necessary to insert new
batteries.
■ Turn the battery compartment cover A2 anticlockwise and pull it out upwards.
■ Place two new type AA/LR6 batteries (2× 1.5 V) into the battery compartment. When
inserting the batteries, heed correct polarity.
■ Put the battery compartment cover A2 on to the motor unit A3. Ensure that the tabs
on the inner side of the battery compartment cover A2 fit into the grooves on the
motor unit A3. Then turn the battery compartment cover A2 clockwise until you
feel slight resistance.
Note:
When changing batteries, it is necessary to first remove the old batteries.
Assembly
■ In order to use the milk frother, insert the stainless steel whisk A4 into the hole in
the motor unit A3 – see fig. B.
Operation
■ Before using it, check that the batteries are correctly inserted and that the milk
frother is correctly assembled.
1. Fill atall glass / cup to 1/3 with the milk that you wish to froth.
2. Insert the milk frother into the glass / cup so that the whisk A4 is submerged just
below the surface.
3. Press the On/Off button and the milk frother will start.
4. Carefully move the milk frother in circular motion just below the milk level.
5. Once bubbles start to form, slowly pull the milk frother upwards so that the whisk
A4 is submerged both in the milk and in the formed frothed layer.
6. When the milk is sufficiently frothed, press the On/Off button and wait for the whisk
A4 to come to astop. Only then may you take it out of the frothed milk.
Tip:
To achieve arich milky foam, it is recommended to use well cooled milk with ahigher
fat content.
Note:
Always wait for the whisk A4 to come to acomplete stop before removing
it from the frothed milk. If you were to take it out sooner, milk would be
splashed around.
Tip:
If you wish to froth hot milk, use milk with amaximum temperature of 60 °C. If the milk
were to have ahigher temperature, the result of the frothing may not be satisfactory.
Stand
■ The milk frother is supplied with apractical stand A5 into which the milk frother can
be conveniently placed so that it is ready for use in an appropriate place, e.g. next
to an espresso machine.
■ Carefully place the milk frother into the stand A5 – see fig. C.
CLEANING AND MAINTENANCE
■ The milk frother must be cleaned after every use. Dried on milk residues may be
very hard to remove.
■ For cleaning any part of the product, do not use cleaning products with an abrasive
effect, solvents, etc. that could damage the surface of the appliance. No part of this
product is intended for washing in adishwasher.
Warning:
Do not submerge the motor unit in water or in any other liquid.
This could result in irreparable damage to the product.
Cleaning the whisk
The whisk A4 must be cleaned after every use.
1. In order to properly clean the whisk A4, fill the glass / cup about half way with water
and asmall amount of dishwashing detergent, and insert the milk frother into the
water so that the whisk A4 is submerged in the water.
2. Press the On/Off button and allow the milk frother to run until all the milk residues
on the whisk A4 are removed. Press the On/Off button to turn off the milk frother.
3. Carefully take the whisk A4 off the motor unit A3 and rinse it under clean cold water.
Dry it using aclean wiping cloth or leave it to dry naturally. Insert the clean whisk A4
into the motor unit A3 and put it into the stand A5.
Note:
In the event that dried milk residues remain on the whisk A4, you can use
abrush with gentle bristles to remove them.
Cleaning the motor unit
■ To clean the motor unit A3, you can use asoft cloth lightly dipped in lukewarm
water. Prevent any water from entering into the motor unit A3.
Storage
■ When not using the milk frother for an extended period of time, take the batteries
out of it and clean it according to the instructions in chapter "Cleaning and
maintenance".
■ Put the milk frother into the stand. Store it in adry and well-ventilated location.
RECIPES
Vienna coffee
■ Pour 125ml of strong black coffee into acup.
■ Froth up about 100 ml of milk and fill the cup up with milk froth up to its edge.
Sweeten to taste.
Marocchino
■ Warm up about one spoon of milk chocolate and pour out the inner sides of aglass
with this warm chocolate.
■ Pour one espresso into the glass. Froth up some milk and add 3 – 4 teaspoons of
milk froth into the glass.
■ Sprinkle the milk froth with cocoa.
Hot chocolate
■ Froth up some hot milk and add cocoa or ahot chocolate mix into it. Mix thoroughly.
■ You can add aliqueur to taste, e.g. Amaretto.
Ice chocolate
■ Add alittle hot chocolate mixture or chocolate syrup into cold milk.
■ Froth up the milk with the chocolate mixture.
■ Add ascoop of vanilla ice cream and pour over with asmall amount of chocolate
syrup.
Milkshake
■ Add some fine jam or fruit syrup into cold milk. Froth up the milk into asmooth
foam.
TECHNICAL SPECIFICATIONS
Voltage............................................................................................................................... 2 × 1.5V
Battery type...........................................................................................................1.5 V; type AA (LR6)
Changes to text and technical parameters are reserved.
INSTRUCTIONS AND INFORMATION REGARDING THE
DISPOSAL OF USED PACKAGING MATERIALS
Dispose of used packaging material at asite designated for waste in your municipality.
DISPOSAL OF USED BATTERIES
Batteries contain environmentally damaging compounds and,
therefore, do not belong in standard communal waste. Hand over
used batteries for proper disposal at locations intended for their
collection.
This product meets all the basic requirements of EU directives related to
it.