•Sengled Smart Plug are created for Frustration Free Setup. If you have
purchased the plugs from Amazon using the same Amazon shop account as your Alexa App
account, and had selected “Link to my Amazon account to simplify setup”before paying for them
on Amazon shop, you can install the plug close to your compatible Alexa device and power it on.
The plug can join the Bluetooth network automatically.
•You can also try the traditional way to set up plug by asking “Alexa, discover devices.”After the
plug get discovered and connected with the Echo device, you will receive a notification from
Alexa app. You may also receive a voice prompt from your Echo device if you have a single Echo
device at home.
Mesh Network Setup
If you want to have multiple plugs setup for different rooms, especially rooms out of the range
of the Alexa device’s signal range, you can utilize Mesh Network setup to extend the range.
1. First, Set up the smart plugs close to the Alexa device.
2. Unplug the smart plug and move it farther away from the
Alexa device and make sure it’s within Bluetooth distance of
another active Bluetooth device, which is connected on the
network as a node. This will form a Bluetooth Mesh network.
Each connected device will connect with other Bluetooth
devices (nodes) within the range.
3. Once you have successfully connected the device to your
Alexa app, you may attach it to wherever you would like in your
home.
Congratulations on successfully set up your smart plug.
Reset Instructions:
To reset your Sengled Smart Plug, please make sure it’s plugged into an outlet, then push the
power button and hold it for more than five seconds, then release. The purple indicator light
will flash five times to indicator resetting successfully, then slowly pulse red on and off. If it does
not pulse, please try power cycle and reset it again. Once successfully reset, please pair your
Smart Plug again in your Alexa app.
Operation:
The following section outlines some of the popular operational modes of the Sengled Smart Plug.
A) On / Off
Smart Plug can be controlled through a variety of means:
•Via the physical power button
• Through Alexa app
• Through Voice Control
B) Routines
Routines can be created with the Alexa app. Use the main manual of the Alexa app and choose
