Sennheiser RS 135 User manual

~
Rechargeable
batterie
NiMHAAA
1.2
V
s

4
5
OFF
6
•
•
I
Vol-

Package contents
~ HDR 135 headphones
® !~d~~~:~~:~~~~~a:i!h
~ NT9-3A powersupply unit (US version)
~ NiMH rechargeable batteries, AAA size, 1.2 V
~ Adapter, 2 RCA sockets to 3.5 mm jack plug
ccr1T7f) Adapter, 1/4" (6.3 mm)
Instruction manual
Safety Guide
1

The diagrams corresponding
to
the
chapter
headings
can
be
found on
the
fold-out
page.
Preparing
the
transmitter
for use
The
transmitter
is
prepared
for
wall
mounting
(recess
at
the
rear
of
the
transmitter).
The
required
mounting
material
(screws and plugs)
is
not
included in
the
delivery.
(":;!
Connecting the
transmitter
to
an
audio
output
of
L.J
your audio source
IJJil.
Choose
a suitable place near your audio source (e.g.
TV,
stereo or home cinema system). Avoid placing
the
trans-
mitter
close
to
metal objects
such
as
shelf bars, rein-
forced concrete walls, etc.
as
this
can
decrease
the
trans-
mitter's
range.
~
Connect
the
transmitter's
audio connection cable:
• directly
to
the
RCA
sockets
(outputs)
of
your audio
source, making sure
to
connect
the
red
RCA
plug
to
the
red
RCA
socket
F\
,
or
•
to
the
supplied RCA/3.5 mm adapter
for
connection
to
a 3.5 mm headphone socket, or
•
to
the
supplied RCA/3.5 mm adapter and
1/4"
(6.3
mm)
adapter
for
connection
to
a
1/4"
(6.3
mm)
headphone
socket.
IJJil.
Set
the
volume
for
the
headphone
output
of
your audio
source
to
a medium level.
If
the
headphone
output
volu-
me
is
set
too
low,
the
transmitter
automatically switches
off.
D Some
TVs
have a function
that
mutes
the
TV
loud-
speakers when you connect a
transmitter.
If
neces-
sary, change this setting via
the
operating menu
of
your
TV.
Connecting
the
transmitter
to
the
power supply system
• Connect
the
power supply
unit
to
the
socket
at
the
rear
of
the
transmitter.
Plug
the
power supply
unit
into
a wall
socket. The
transmitter
switches
on
and
the
ON/OFF
LED
lights up green.
2

Preparing the headphones for use
0 Opening the battery compartments
• Turn
the ear pads in the direction of the arrow until you
overcome a slight resistance and
lift them off the ear
cups.
(2J Inserting and replacing the rechargeable batteries
.Jl\ CAUTION
~ IIJI. Only use NiMH rechargeable batteries, never
~------' use standard batteries!
• Insert
the supplied rechargeable batteries. Secure the ear
pads
to the ear cups.
~ Charge the rechargeable batteries for at least 24 hours
prior
to first time use. Subsequent charging time de-
pends on
the previous operating time and is up to
18 hours max.
~ Place the headphones on the charging cradle of the trans-
mitter.
The red CH1\RC)E: LED lights up, indicating that the
batteries are being charged. The CHA.RC1E LED remains lit
even when the rechargeable batteries are fully charged.
Using the headphone system
0 Switching on the audio source
llfi. Switch on the audio source. The transmitter automatical-
lyswitches
on and off together with the audio source. The
ON/OF-F LED lights up green.
[~J Switching on. the hec-1dphones/adjusting the volume
• First, set the volume on the headphones to a low level.
..- Switch on the headphones and set the volume to the de-
sired level.
.,.. Switch off the headphones after use to avoid discharging
the batteries.
3

0 Optimizing
the
reception
.,...
Adjust
the
receiver channel
with
the
TUNE
control on
the
headphones.
However,
if
reception
is
subject
to
interference:
.,...
Change
the
transmission channel by setting
the
switch
at
the
bottom
of
the
transmitter
to
another position and re-
adjust
the
receiver channel
with
the
TUNE
control on
the
headphones.
Some
electronic devices (e.g. televisions)
can
cause interference
to
your wireless headphone sys-
tem.
If
this happens, increase
the
distance between
the
transmitter
and
the
interference source.
Specifications
and
additional information
.,...
Specifications are included
on
the
inside
cover page.
.,...
Visit our website
at
www.sennheiser.com.
4

Manufacturer declarations
Warranty
Sennheiser electronic
GmbH
&
Co.
KG
gives a
warranty
of
24 months on this product.
For
the
current
warranty
conditions, please visit our website
at
www.sennheiser.com or contact your Sennheiser partner.
Before
putting
the
device into operation, please observe
the
respective country specific regulations!
Statements regarding
FCC
and
Industry
Canada
We,
FCC
Declaration
of
Conformity
(DoC)
~
SENNHEISER
~
Model No:
RS
135
Sennheiser Electronic Corporation
One
Enterprise
Dri~
•
Old
Lyme •
CT
06371
•
USA
Tel
:
+1
(860)
434
9190
Fax
:
+
1
(860)
434
1759
declare
the
above device comply
with
the
requirements
of
Federal Communications Commission.
This device complies
with
Part
15
of
the
FCC
rules. Operation
is
subjected
to
the
following
two
conditions:
1)
This device
may
not
cause
harmful
interference, and
2) This device
must
accept any interference received, including interference
that
may cause undesired operation.
Responsible Party: Greg Beebe
This device complies
with
Part 15
of
the
FCC
rules and
RSS-
210
of
Industry Canada. Operation
is
subject
to
the
follow-
ing
two
conditions: 1) This device may
not
cause harmful in-
terference, and 2) This device
must
accept any interference
received, including interference
that
may cause undesired
operation.
This equipment
has
been tested and found
to
comply
with
the
limits
for
a
Class
Bdigital device, pursuant
to
part
15
of
the
FCC
Rules
and RSS-210
of
Industry Canada. These lim-
its are designed
to
provide reasonable protection against
harmful interference
in
a residential installation. This equip-
ment
generates,
uses
and
can
radiate radio frequency en-
ergy and,
if
not
installed and used in accordance
with
the
instructions, may cause harmful interference
to
radio com-
munications. However, there
is
no guarantee
that
interfer-
ence
will
not
occur
in
a particular installation.
If
this equip-
ment does cause harmful interference
to
radio or television
5

reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate
the receiving antenna.
• Increase
the separation between the equipment and
receiver.
• Connect
the equipment into an outlet on a circuit diffe-
rent from that to which the receiver is connected.
• Consult
the dealer or an experienced radio/TV techni-
cian
for help.
Changes or modifications made
to this equipment not ex-
pressly approved by Sennheiser electronic
Corp. may void
FCC authorization to operate this equipment.
CAN ICES-3 (B)/NMB-3(8)
RF Radiation Exposure Information
Since the radiated output power of this device is far below
the FCC I IC radio frequency exposure limits, it is not subject-
ed to routine RF exposure evaluation as per Section 2.1093
of the FCC rules and RSS-102 of Industry Canada.
This device meets
FCC/ IC RF exposure guidelines for an
uncontrolled environment.
The transmitter of this device
should
be installed and operated at least 20 em away from
the user's body. Use of other accessories not verified by the
manufacturer may not ensure compliance with FCC I IC RF
exposure guidelines.
This
transmitter must not be co-located or operated in con-
junction
with any other antenna or transmitter.
In compliance with:
USA
Fe FCC 10: DMORS03ABUS
Canada
IC: 2099A-TR12011 CAN ICES-3 (B)/NMB-3(B)
6