Sennheiser SZI 30 Dimensions

Features—Benets
• Works with any modulator
• Easy to install
• Master system can be used independently for up to 750 sq. ft. of coverage
• SZI 30 slave emitters offer increased coverage
• Connects to line level audio source via 1/8" or 1/4" plug unbalanced
• 1-year warranty
Technical Data
– noitaludoM
zHk 05± noitaived lanimoN
zHM 6 .xamseicneuqerfreirraC
–tupniFA
AF input voltage for nominal deviatio –
rotaludomnosdnepedesnopserycneuqerfFA
THD (1 kHz, nom. dev.) ≤1 %
AF signal-to-noise ratio ≥60 dB(A) rms
05ahtiwkcajonom"8/1tuptuoFR–tupniFR Ωterm. impedance
k02.xorppaecnadepmituptuO Ωor 50 Ω
11sedoidRI
Max. coverage area approx. 750 sq. ft., single-ch./ 375 sq.ft. in two channels
Radiating power approx. 0.5 W
tekcossaxeTnip-2aivCDV72–42egatlovgnitarepO
Am051.xorppanoitpmusnoctnerruC
45.3x89.x46.4.xorppammnisnoisnemiD
zo67.4
.xorppathgieW
Product Variants
SI 30 Modulator/Emitter
SZI 30 Infrared Emitter
NOTE: Power supply is not included. Please order as required.
Radiator cluster with four IZK 20 clamps and IZM 20
cluster mounting kit
Front view of SI 30/SZI 30
Back view of SZI 30
SZI 30
The SZI 30 is a small area emitter which can be fed modulated signals from an SI 30 or any
other wideband modulator. It has no charging compartments, the LED on the right of the
front panel serves as a power indicator instead, showing that a supply voltage is present.
At the back of the SZI 30 you have—besides the DC input connector—two RF sockets. If
no plug is connected to the output socket, a 50 Ω terminating impedance is switched into
the RF connection.
SZI 30
CBinder - Information Systems.indd 49 11/11/08 11:50:18 AM

Product Compatibility
Any wideband infrared modulator
Optional Accessories
Power supply for one unit NT 20-1-120
Power supply for up to four SI 30 / SZI 30 NT 20-4-120
)m5.7(7-02RKelbacnoitcennocFR
)m1.0(510-02RK)kcajmm5.3x2(
)m1(1-02KKelbacnoisnetxeFA
)m5.7(7-02KK)saxeTx2(
4-way “octopus” cable (Texas) KKY20-015
Mounting clamp, one required for each unit IZK 20
02MZItikgnitnuomretsulC
5/8" to 3/8" adapter when mounting a
612AZMtinuelgnis
Supplied Accessories
None
Coverage area of the SI 30 / SZI 30
Polar pattern of the SI 30/SZI 30
Four SZI 30, mounted at an angle of 60° to one anoth-
er. For comparison purposes, the coverage of a single
SZI 30 is shown at 30°.
Recommended Cabling
03ISehtmorflangisdetaludomehtrofdnehcaenosgulpinimmm5.3htiwxaoc471GR
SZI 30
CBinder - Information Systems.indd 50 11/11/08 11:50:19 AM