Sennheiser EVOLUTION E908 User manual

e 908
Instruction manual
e908_Manual_01_2019_EN.indd 1 26.02.2019 13:58:51
All manuals and user guides at all-guides.com
all-guides.com

e 908 | 2/8
Delivery includes
Delivery includes
e 908 D e 908 B e 908 B ew
• e 908 D microphone • e 908 B microphone • e 908 B ew microphone
• MZA 900 P phantom power
adapter
• MZA 900 P phantom power
adapter
• MZH 908 D microphone
clamp
• MZH 908 B microphone
clamp
• MZH 908 B microphone
clamp
• Pouch • Pouch • Pouch
• Quick guide • Quick guide • Quick guide
• Safety guide • Safety guide • Safety guide
Product overview
2
1
3
5
1
2
3
44
e 908 D e 908 B / e 908 B ew
1. Microphone head
2. MZH 908 D microphone clamp
3. Gooseneck
4. XLR-3 connector
5. Knurled screw
1. Microphone head
2. MZH 908 B microphone clamp
3. Gooseneck
4. e 908 B: XLR-3 connector
e 908 B ew: 3.5 mm jack
e908_Manual_01_2019_EN.indd 2 26.02.2019 13:58:52
All manuals and user guides at all-guides.com

e 908 | 3/8
Installation
Installation
Attaching the microphone
Carefully bend the flexible goose neck.
Connecting the microphone
Plug the 3.5 mm mini jack plug into the 3.5mm jack socket of the MZA 900 P phantom power ad-
apter (included with e 908 B and e 908 D).
Tighten the coupling ring.
Plug the XLR cable into the XLR output of the MZA 900 P phantom power adapter.
e908_Manual_01_2019_EN.indd 3 26.02.2019 13:58:52
All manuals and user guides at all-guides.com

e 908 | 4/8
Installation
Using the windshield
Place the MZW 908 (optional accessories) windshield over the microphone head.
e908_Manual_01_2019_EN.indd 4 26.02.2019 13:58:53
All manuals and user guides at all-guides.com

e 908 | 5/8
Operation
Operation
Positioning the microphone e 908 B/e 908 B ew on a wind instrument
Use the microphone clamp to attach the e 908 to the bell of the instrument.
It is vital to observe the following notes:
Position Resulting sound Commentary
A Reduced ambient noise Directed into the bell of the instrument.
B Clear, powerful sound
C Balanced, natural sound Directed partly towards the bell and partly towards
the body of the instrument.
A B C
Positioning the microphone e 908 D on a drum
Attach the drum clamp to the rim of the drum by putting the upper part of the clip onto the rim
and clipping it on by pushing down the drum clamp in a rotating action until it snaps into place.
Loosen the knurled screw.
Insert the gooseneck from the side into one of the two slots.
Tighten the knurled screw.
It is vital to observe the following notes:
Position Resulting sound Commentary
D More fundamental
Little overtones
Position on the drum: 3–5 cm above the drumskin,
directed towards the center of the drumskin, the
fundamental to overtones ratio can be adjusted by
changing the angle of the microphone.
The most balanced results are obtained at an angle
of 30–60°.
E Less fundamental
Many overtones
F Pronounced proximity effect Optional: tangential position of the gooseneck in
order to reduce the distance to the drumskin.
D E F
You can attach two microphones to the drum clamp (e.g. for picking up two toms in cramped space
conditions). To do so, use both slots of the drum clamp.
The various adjustment possibilities of the MZH 908 D and MZH 908 B clamps together with the
flexible gooseneck enable the microphone to be optimally positioned on the sound source.
e908_Manual_01_2019_EN.indd 5 26.02.2019 13:58:53
All manuals and user guides at all-guides.com

e 908 | 6/8
Cleaning and maintaining the e 908
Positioning the monitor loudspeakers
To prevent feedback and crosstalk, postion your monitor loudspeakers in the angle area of the
highest cancellation of the microphone (approx. 180°).
180°
Cleaning and maintaining the e 908
CAUTION
LIQUIDS CAN DAMAGE THE ELECTRONICS OF THE PRODUCT!
Liquids entering the housing of the product can cause a short-circuit and damage the electronics.
Keep all liquids away from the product.
Do not use any solvents or cleansing agents.
Disconnect the products from the power supply system and remove rechargeable batteries and
batteries before you begin cleaning.
Clean all products only with a soft, dry cloth.
e908_Manual_01_2019_EN.indd 6 26.02.2019 13:58:54
All manuals and user guides at all-guides.com
all-guides.com

e 908 | 7/8
Specifications
Specifications
Transducer principle pre-polarised condenser microphone
Frequency response 40 - 20,000 Hz
Pick-up pattern cardioid
Sensitivity (free field, no load) 4.0 mV/Pa
Nominal impedance (at 1 kHz) 100 Ω (balanced)*
Min. terminating impedance 2 kΩ*
Max. sound pressure level (active)
e 908 B, e 908 D
e 908 B ew
35 dB(A)
30 dB(A)
Phantom powering 12 - 48 V*
Connector
e 908 B, e 908 D
e 908 B ew
XLR-3*
3.5 mm jack
Dimensions ⌀ 47 x 193 mm
Weight 140 g
* with MZA 900 P (e 908 B/e 908 D); e 908 B ew for direct connection to ew transmitters
Polar pattern
125 Hz
250 Hz
500 Hz
1,000 Hz
2,000 Hz
4,000 Hz
8,000 Hz
16,000 Hz
30°
0°
180°
150°
120°
60°
90°
0
5
10
15
20
25
dB
30°
0°
180°
150°
120°
60°
90°
Frequency response
-40
-50
-60
-70
-80
-90
50
100 200 500
1,000
2,000
5,000
10,000
20,000
Hz
dBV
0°, 1 m
e908_Manual_01_2019_EN.indd 7 26.02.2019 13:58:54
All manuals and user guides at all-guides.com

e 908 | 8/8
Overview of applications
Connector assignment
3
21
+
+
e 908 B/e 908 D
e 908 B ew
3.5 mm3.5 mm
3.5 mm
Overview of applications
Primary application
Secondary application
•••••
••
••••
••
•••
••
••••• •
•• ••• •••
•• •
•• •
•• •
•••
•• •
••
••••
••
••••• •
••
••• •
••••• •••
••
••
•••
••
e 602 II
e 604
e 608
e 609 silver
e 614
e 835
e 845
e 865
e 901
e 902
e 904
e 906
e 908
e 914
e 935
e 945
e 965
e908_Manual_01_2019_EN.indd 8 26.02.2019 13:58:55
All manuals and user guides at all-guides.com