Sennheiser HS 2 User manual

Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany, www.sennheiser.com
Printed in Germany, Publ. 09/21, 587483/A03
Quick Guide | Kurzanleitung | Guide de démarrage rapide | Guida rapida | Instrucciones resumidas | Instruções
resumidas | Beknopte gebruiksaanwijzing | Krótka instrukcja obsługi | Snabbguide | Kort vejledning | Pikaohje |
Γρήγορος οδηγός | Kısa Kılavuz | Краткая инструкция | 快速指南 | 快速使用指南 | クイックガイド | 요약 설명서|
HS 2
In the box Adjusting
Headband
Setup Use
click!
3-Pin connector3.5 mm jack plug
**
Safety
Guide
Quick
Guide
2-3 cm
Frequency caps
MZC 2-2MZC 2-1
3-Pin connector
3.5 mm jack plug
or
Headband
*not included
slightly bend
slightly bend

Frequency response
Cleaning Specifications
Accessories
capsule only
with MZW 2
with MZC 2-1 with MZC 2-2
with MZW 2 and MZW 02
Frequency response curves of the microphone
Microphone placed in the corner of the mouth, distance to the mouth 3 cm
-30
-40
-50
-60
-70
-80
10 20 50 100 200 500 1000 2000 5000 10000 20000 Hz
Windshields
– 20 dB
MZW 2*
– 30 dB
MZW 2* + MZW 02*
MZW 02*MZW 2*
Pick-up pattern
Frequency response
Sensitivity in free field
Nominal impedance
Min. terminating impedance
Equivalent noise level:
CCIR-weighted
A-weighted
3-Pin
3.5 mm jack
Max. sound pressure level
Connector
Cable length
Diameter of microphone
Weight with headband
Power supply
1 kΩ
omni-directional
20 - 20,000 Hz
30.1 g
28.9 g
5 mV/Pa ±3 dB
1.6 m
4.8 mm
41 dB
28 dB
140 dB
4.7 kΩ
3.5 mm jack | 3-Pin
7.5 V
Frequency cap
or
short cap:
MZC 2-1
long cap:
MZC 2-2
or
+ 4 dB+ 2 dB
*optional accessories