Cat. No. 003330
MKE 44 P
Microphones | Back-Electret Condenser Microphone
General Description
The MKE 44 P is a back-electret pre-polarised condenser microphone with
two cardioid microphone capsules set at 90° for XY stereo applications.
Features
j
Light, robust and easy to handle
j
Phantom (12 – 48 V) or battery powered (1 x 1.5 V AA size)
j
Easy handling even in outdoor applications
j
Sprung-mounted capsule ensures good suppression of handling noise
j
2-position low-frequency roll-off filter
j
Transformerless balanced output on 5-pin XLR connector
j
Delivery includes: 1 MKE 44 P
1 adaptor cable with 1 x 5-pin XLR-F
to 2 x 3-pin XLR-M connectors
1 velour foam windshield
1 foam-lined case
Technical Data
Pick-up pattern ................................................................2 x cardioid
Frequency response .................................................40 – 20,000 Hz
Sensitivity (free field, no load, 1 kHz).......... 6.3 mV/Pa ± 2.5 dB
Nominal impedance ................................................................. 250 Ω
Min. terminating impedance..................................................... 1 kΩ
Equivalent noise level
A-weighted (DIN IEC 651)........................................................ 25 dB
CCIR-weighted (CCIR 468-3).................................................... 35 dB
Max. SPL (1 kHz) .............................................126 dB (THD = 1 % )
Power supply........................................phantom 12 – 48 V (± 4 V)
or 1.5 V AA size battery
Supply current................................................................... 2 x 1.5 mA
Battery life ................................................................................1000 h
Dimensions ................................... Ø 44 x 190 mm, body Ø 24 mm
Weight ......................................................................................... 125 g
Profile
Cardioid stereo microphone for XY stereo applications, fre-
quency response 40 – 20,000 Hz, sensitivity (free field, no
load) 6.3 mV/Pa ± 2.5 dB at 1 kHz, nominal impedance 250 Ω,
min. terminating impedance 1000 Ω, max. SPL 126 dB at 1 kH
z (THD = 1 %), power supply 12 – 48 V phantom powering or
1.5 V alkaline battery, supply current 2 x 1.5 mA, battery life
1000 h, dimensions Ø 44 x 190 mm, body Ø 24 mm, weight
125 g.
