Sensica sensiLift User manual

Table of Contents
What is Sensilift 4
Who should use and how to decide to use Sensilift
5
Sensilift's safety 5
Sensilift Device Description 5
When shouldn’t Sensilift be used?
8
8
9
10
11
11
User Instructions 12
Device Set-Up 12
How to prepare yourself 12
Preliminary Test 13
How to Use the Sensilift device
13
Recommended treatment protocol 14
Treatment areas 15
What to expect when using Sensilift
16
Post facial treatment care
16
Cleaning and troubleshooting
16
Cleaning 16
Troubleshooting 17
Customer Service 18
18
© All rights reserved to EL Global Trade Ltd.
3
Device Specification Parameters
Possible Side Eects
Indications for Use
How does it work?
4
4
Hand-held description
User interface description
6
7
Who cannot use the Sensilift - CONTRAINDICATIONS
What you must do to avoid serious harm – WARNINGS
What you must do to avoid other harm - CAUTIONS
Benefits
Typical Sensilift Treatment Interval 14
English
Storage Instructions
Labeling
18
19

English
4
What is Sensilift
Sensilift is a home use device
intended for non-invasive
treatment of mild to moderate
facial wrinkles and rhytides.
Sensilift brings a completely
new approach to non-invasive
skin treatment using Dynamic
RF™ technology combining RF
(Radio Frequency) used by
doctors professionals
worldwide with the comfort of
moving treatment fingers.
The Sensilift is an
over-the-counter home use
device intended for
non-invasive treatment of mild
to moderate facial wrinkles for
adult women who have
Fitzpatrick Skin Types I-IV.
A major cause of skin wrinkles is
the reduction in the quantity
and quality of collagen fibers in
the dermis and hypodermis
(skin layers).
clinics for a long time. RF
treatments were found to
produce a highly ecient
thermal eect on biological
tissue. Heat is generated as a
result of tissue resistance to
the movement of electrons
within the RF field. The
sub-cutaneous heat
generates new collagen and
enhances existing collagen,
leading to wrinkles reduction.
The Sensilift treatment creates
enough thermal eect to
induce collagen remodeling
with no ablative thermal
damage of the epidermis or
dermis.
The Sensilift device is based on
the unique Dynamic RF™
technology. The unique
technology combines RF with
moving treatment fingers. This
maximizes the eectiveness
and safety of the RF
treatment, allowing multiple RF
waves to reach wider range of
skin layers and assist in getting
best possible visible and
ongoing, lasting results.
Indications for Use:
How does it work?
Introducing the new Dynamic
RFTM technology
Radio Frequency (RF) is a form
of electromagnetic energy. RF
energy is being used in doctors’
Please carefully read
this user manual before
you start using Sensilift.

English
5
Who should use and
how to decide to use
Sensilift
•Sensilift is intended for women,
30-70 years old who desire to
reduce mild to moderate
facial wrinkles and rhytides.
Sensilift is intended for use on
the cheeks, around mouth,
the “crow’s feet” next to
your eyes, and the chin
(as also demonstrated in the
“treatment area” section.
Sensilift is intended for use on
Fitzpatrick skin type I-IV,
according to Fitzpatrick skin
chart below, see also colored
Fitzpatrick chart at the back
cover)
•
•
12 3 45 6
V
Type 1
Light,
pale,
white
V
Type 2
White
fair
V
Type 3
Medium
white
to olive
V
Type 4
Olive,
moderate
brown
X
Type 5
Brown,
dark
brown
X
Type 6
Black,
very
dark
brown
Note: Sensilift is especially
designed for your own
personal treatment! It is
intended for a single user only.
Sensilift's safety
Sensilift has two built in thermal
sensors, constantly measuring
your skin temperature. When
the temperature rises to the
maximal allowed (104oF), the RF
energy will automatically stop.
When temperature is low
enough, the RF energy will be
automatically re-activated.
In addition, the RF electrodes
constantly move. This prevents
local over-heating of your skin.
No over-heating due to the
temperature sensors and the
movement of the treatment
fingers. Altogether, follow the
instruction for use and your
treatment will be comfortable
and pleasant.
Sensilift Device
Description
The Sensilift device kit has the
following main components:
1.External power supply
2. Sensilift hand-held device:
Two treatment fingers
including the electrodes
applying RF while moving.
The treatment fingers also
include safety temperature
sensors.
3. Base Gel: Specially designed
to improve contact between
the device and the skin and
enhance skin conductivity.
Base Gel ingredients:
Glycerin, Aqua, Phenoxyethanol,
Ethylhexylglycerin,
Triethanolamine and Carbomer.

English
6
Handheld description
Temperature
sensors
RF electrodes
(fingers)
2
1
Power
socket
1-2 Speed
level lights
1-3 RF energy
level lights
Speed
selection
touch button
RF energy
selection touch
button
Status
indicator
4
5
6
3
8
7

English
7
Status
Indicator
RF energy level
selection touch
button
Speed level
selection touch
button
Blinking yellow
light
Steady green
light
Blinking
alternating
green and
yellow lights
1-3 energy
levels lights
1-2 speed
level lights
Sensilift is on Stand-by mode.
In case of no light, make sure
the power cord is plugged-in
properly.
When energy (1-3) or speed (1-2)
level are selected and ON – you
can start your treatment.
Sensilift is in Treatment mode, RF
is activated, skin contact is
detected and the treatment is
ongoing.
Green light on, indication of RF
energy level. Press the RF
energy level selection button
repeatedly until you reach the
desired level: 1, 2, 3 or o. *
Green light on, indication of
speed function level. Press the
speed level selection button
repeatedly until you reach the
desired level: 1, 2, or o. *
User interface description
No indicator
light – before
treatment
Sensilift is in Error mode, the
device has detected a
malfunction and prevents the
activation of the RF and speed
functions.
*Note: The activation of either the RF or Speed function will automatically
activate the other function at level 1. You can select other levels based on
the “preliminary test”.
Notice that you cannot use RF function alone or speed function alone.
They always work together!
Note: when the RF and speed is on but there isn't any contact with the
skin for 45 seconds, the device will automatically return to stand-by mode.

English
8
•
•
•
•
•
•
When shouldn’t
Sensilift be used?
Sensilift is designed to allow
you safe and eective
treatment. However, Sensilift
might not be appropriate for
everyone. Please read the
information below before use.
If you still have any doubts,
and you are unsure that
Sensilift is safe for your use,
please consult with your
physician.
Who cannot use Sensilift -
CONTRAINDICATIONS
•If you have an active implant
such as a pacemaker or
insulin pumps or if you have
any severe known heart
disorder such as arrhythmias.
If you are pregnant or
breastfeeding.
If your skin is Fitzpatrick skin
type V or type VI (dark skin).
If you suer from severe or
uncontrolled endocrine or
metabolic conditions (such as
diabetes and uncontrolled
thyroid disease).
If you have a damaged
immune system or
•
•
Do NOT use Sensilift device if
you have any of the following
conditions:
•
•
autoimmune disorders such as
AIDS, or Lupus, or if you use
drugs that influences the
immune system.
If you suer from blood
clotting disorders or excessive
bleeding or bruising or
damaged wound healing or if
you routinely taking blood
thinning medications.
If you suer from a history of
deep vein thrombosis
(formation of a blood clot in
the veins).
If you have history of collagen
disorders or suer from keloid
scar (growth of extra scar tissue
where the skin has healed after
an injury) formation.
If you have extreme general
illness, such as hepatitis, liver
disease or epilepsy.
If you suer from sensitive skin
such as in cases of frequent
redness, inflammations,
breakouts, infection and acne
or extra dry skin.
If you have diminished or
exaggerated perception of
temperature changes.
If you have been taking
Accutane in the past 6 months.
If you have heat induced
disease or an active skin
disease (Herpes, Eczema, rash
etc.) in the treatment area.
•
•

English
9
•Do not use the device if you
have skin cancer or on areas
at risk of malignancy or if you
have received radiation
therapy or chemotherapy
within the past 3 months.
What you must do to avoid
serious harm – WARNINGS
•Do not use over any
permanent implants in the
designated treatment area
(including but not limited to:
silicon or injected chemical
materials, metal plates or
other metal materials).
If you had plastic surgery
(such as face lifting or eyelid
surgery) if you had aesthetic
injections of fillers (such as
Hyaluronic acid, Collagen, fat
or Botulinum toxin) in the
treatment area within the
past 3 months.
If you had professional
chemical peel within the past
3 months (Alpha hydroxyl
acids (AHA) such as glycolic
acid or Beta hydroxyl acid
(BHA), or professional facial
•
In some cases Sensilift safety
and eectiveness has not
been tested or established
yet. Therefore, if you have any
of the following conditions, it is
NOT advised that you use the
device:
•
•
•
•
•
abrasion (such as
dermabrasion, facial
resurfacing, or deep chemical
peeling (Phenol, Trichloraacetic
acid-TCA, and/or ablative
laser treatments) within the
past 3 months.
Do not use over nostrils, lips of
the mouth, ears, breast or
genital area, or areas not
recommended in this user
manual.
Do not use over the thyroid
since it may cause adverse
events.
Do not use over the eyelids,
eyes or sides of the eyes
next to your nose) since it
may cause eye damage.
Do not use the Sensilift over
any metal items (such as
earrings, jewelry or piercing) or
on tattoos or permanent
make up in the designated
treatment areas.
Do not use over sunburns,
dark brown or black spots
such as freckles, birth marks,
around the nipples, moles or
blisters in the treatment area.
If you are allergic or sensitive
to chrome, nickel or any
component of the “Base Gel”.
If you are male.
If you are under the age of 30
or over the age of 70.
•
•
•
•

English
10
•This appliance is not intended
for use by persons with
compromised physical,
sensory or mental capabilities.
Do not use Sensilift without
facial hair removal from
treatment areas, since it may
result in burn in these areas.
•
Note: If you have undergone
any other aesthetic
procedures in the designated
treatment area or any
uncertainty regarding potential
side eects, consult your
physician before using Sensilift.
What you must do to avoid
other harm - CAUTIONS:
•Never use flammable liquids
such as alcohol or acetone
(including perfumes, sanitizers,
or other products containing)
to clean the skin one hour
before using Sensilift as it may
cause burning of the skin.
Do not open or repair the
device as it may expose you
to dangerous electrical
components.
Do not place, store or use
Sensilift near bathtubs,
showers, basins or other
vessels containing water as
this may cause severe
electrocution.
•
•
•
•
Do not leave Sensilift
unattended while plugged
into the electricity as it may
lead to electrocution risk.
Use the Sensilift only according
to the instructions for use and
for the intended use.
Do not use the device if any
part of the device is missing,
damages or loose, if the device
is not working properly, if you
see or smell smoke or if the
device becomes damp or wet.
Do not use the Sensilift device
without applying the “Base
Gel” before use.
Do not use the “Base Gel”
after its expiration date.
Before using Sensilift, make
sure the device is clean, dry
and intact. Cleaning
instructions are detailed in the
cleaning section.
•
•
•
•
Use Sensilift only with
original power supply.
For your safety, never
use DC adapters which
are not approved by
the manufacturer.
Note: Sensilift is designed to be
used by a single user.

English
11
Possible Side Eects
When using the Sensilift device
according to the instructions
for use, side eects are rare.
However, any aesthetics
procedure, including home use
devices, may cause side
eects. Therefore it is
important that you
understand and accept the
risks and complications that
can occur with RF wrinkle
reduction device:
Benefits
Sensilift Dynamic RF features in
unique treatment fingers. The
treatment fingers enable
multiple RF wave lengths to
penetrate dierent skin layers,
while gently moving along the
treated area, together with
continuous temperature
sensing. This combined action
has been proven to be an
intense, eective and safe
treatment.
Sensilift also includes
dedicated thermal sensors
that constantly “read” your
skin’s condition. The sensors
adjust the temperature to
provide you a more
personalized and safe
treatment for your
convenience and ease of use.
When you use Sensilift on your
face you’ll be able to see and
feel the improvement in facial
wrinkles and rhytides
reduction, with every single
treatment.
As an extra precaution, the RF
Degree
of Side
Eects
Side Eects
Minor
Side-
Eects
Rare
Side-
Eects
Extremely
Rare Side-
Eects
Local pain
Skin Irritation/
Redness/ Sensitivity
Allergic contact
eczema or sensitivity
to the “Base Gel”
Skin mild Burns
Pigment Changes
Excessive Redness
and Swelling
Urticaria (hives/
severe red rash),
Purpura (purple
spots beneath the
skin) or Ecchymosis
(discoloration of the
skin)
Hematoma (swelling
of clotted blood)
Severe Burns
Infection
Bruising
Blistering

English
12
electrodes has been designed
to only emit RF energy only when
they are in contact with your skin.
Response to Sensilift diers
between individuals depending
on biological factors and how
closely treatment instructions
are followed.
Based on the treatment regime
followed in this User's Manual
you should expect to see some
improvement already after 4
weeks.
User instructions
Sensilift is intended for use on
cheeks, around mouth, the
“crow’s feet” next to your eyes,
and the chin, as illustrated in
the treatment areas below.
Device Set-Up
Remove all components
from the box (handheld
device, power supply and
the “Base Gel”).
Check expiration date of the
“Base Gel”.
Make sure the treatment fingers
are clean, dry and intact.
Plug the power supply end into
an electrical outlet and the
cord end into the device socket.
Sensilift is now ready to
be used.
1.
2.
3.
4.
How to prepare yourself
1.
2.
3.
4.
5.
6.
Make sure your skin is dry,
clean and free of topical
products (such as
moisturizers), liquids or lint.
Remove jewelries from the
treatment areas.
Excessive or long facial hair
should be shaved before
using Sensilift.
Use a mirror to assist you
during treatment.
Never use flammable liquids
such as alcohol (including
perfumes, sanitizers, or other
applications containing
alcohol or acetone) to clean
the skin one hour before
using Sensilift as it may
cause burning of the skin.
Perform a preliminary test on
a small patch of skin in the
intended treatment area 48
hours before the first use of
the Sensilift. In the
preliminary test, you can
determine energy and speed
level settings optimal for
your treatment (see
preliminary test section).

English
13
Preliminary Test
How to use Sensilift device
The preliminary test is intended
to determine your skins reaction
to the Sensilift treatment and
help you to find the best Sensilift
setting for each treatment area.
Do a preliminary test on each
area you intend to treat 48 hours
prior to the full first treatment.
Apply a thin, even layer of
the “Base Gel” included in
your kit, on the area of your
skin intended for treatment.
Set the RF energy level and
the speed to the level you
have selected in your
preliminary test treatment.
Press the RF energy level
selection button repeatedly
1.
2.
Apply a thin, even layer of
"Base Gel", included in your
kit, on the area to be treated.
Select RF energy level 3 and
speed level 1.
Place the Sensilift device on
the desired treatment area
and start moving it in circular
motion in the treatment
area, for 3 minutes.
The treatment will create a
warm sensation on your
skin. If you feel your skin is
heated too fast for you,
reduce the RF energy level.
The energy level should be
adjusted according to you
own comfort.
Select the speed level to 1
or 2 according to your own
comfort.
Stop the test if you do not
feel comfortable or if you
see adverse eects such as
severe redness or blistering.
Wait 48 hours and examine
the tested area.
1.
2.
3.
4.
5.
6.
7.
If the skin in the test area
seems normal (no adverse
eects) you can proceed
with a full treatment in the
highest comfortable energy
level and speed level you
have tested.
Note: The RF energy level indicates
the rate at which the temperature
rises when in heating mode. A high
RF energy level will enable you
faster heating. You can achieve
maximum results with all RF energy
levels (for lower levels, it will just
take longer time to reach the
eective temperature). Therefore,
select your optimal RF energy level
according to your level of comfort.
Note: Perform a preliminary test
before proceeding to a full
treatment for the first time. See
“preliminary test section” above.
See treatment areas, treatment
time and treatments schedule in
the “treatment protocol” section
below.

English
14
until you reach the desired
level: 1, 2, or 3. Press the
button repeatedly until you
reach the desired level: 1 or 2.
The activation of either the
RF or speed function will
automatically activate the
other function at level 1.
Select dierent levels based
on your “preliminary test”.
Sensilift is equipped with
safety sensors which will keep
the temperature in the
eective and safe range
during the whole treatment.
Place the treatment fingers on
the intended area, ensuring full
contact with your skin during
the entire treatment. Sensilift
will indicate the proper skin
contact by the green indicator
light. If the Sensilift is not
properly placed, the RF energy
will not be delivered and the
indicator light will be o.
If you do not feel sensations
of warmth after
approximately 10 seconds,
try moving Sensilift on a
smaller treatment area,
and/or increasing the RF
energy level.
Move the device on the
treated area with slow
circular or back and forth
motion. Make sure constantly
and firmly contacting the skin
during the whole treatment.
Turn o the device and then
3.
4.
5.
6.
7.
8.
unplug at the end of each
treatment session.
After completing the
treatment, wipe o the "Base
Gel" from the treated area.
Clean the device with soft
damp cloth or paper towel,
according to cleaning
instructions (see Cleaning
section).
Recommended treatment
protocol:
•
•
Use the Sensilift device once a
week on each desired area for
a period of 8 weeks.
To sustain optimal long term
results, you can repeat Sensilift
treatment protocol as needed.
Notes:
1.
2.
3.
4.
Response to Sensilift device
diers between individuals
depending on biological
factors, heredity and aging.
For long term results,
additional treatments may be
repeated for maintenance.
You may use the treatment
log at the end of this manual,
to assist you with recording
your treatment areas, dates
and duration.
In rare cases, treating the
chin and sideburn can lead
to paradoxical eect of hair
regrowth.
Typical Sensilift Treatment
Interval

English
15
Treatment areas
Do not treat full areas with
energy levels you have not
tested before in a preliminary
test.
"Crow's feet" (beneath and sides
of the eyes) treatment
(Treatment area 1)
•Place the treatment fingers
on the area as indicated in
the picture.
Keep moving the device in
continues slow 'side to side'
circular motion.
Avoid areas such as inside
the nostrils, eye cavity and
oral cavity, as treatment in
of these areas may cause
adverse eects.
Avoid contact with
the eyes and
eyelashes.
The
recommended
treatment time for
this area is 5 minutes
(on each side).
•
•
Cheek and around mouth
treatment (Treatment area 2)
•Place the treatment fingers
on the area as indicated in
the picture.
Move in slow circular motions
across the cheek area and
up and down over the “smile
folds”
The recommended
treatment time
for this area is
5 minutes
(on each side).
•
•
11
22
3
11
•
•
Do not use the device
in the inner side of the
eye (next to the nose)
or on the eyelids. Keep
a distance of 1 inch
from your eyelids and
corners of the eyes.
2 2
Do not use the device
on the lips of the
mouth.

English
16
Chin treatment
(Treatment area 3)
•Place the treatment fingers
on the area as indicated in
the picture.
Keep the device moving from
one side of the chin to the
other.
The
recommended
treatment
time for this
area is 5
minutes.
•
•
What to expect when
using Sensilift
Sensations of warmth during
session of treatment –
created by the RF energy.
Some mild red or pink color
to the skin – during and just
after using the Sensilift
device.
•
•
3
Do not use the device
on the thyroid area
(bottom middle area of
the neck).
During your facial wrinkle and
rhytides reduction treatment it
is normal to experience:
Post facial treatment care
Cleaning and
troubleshooting
Cleaning
•After completing the
treatment, wipe o the "Base
Gel" from the treated area.
Apply a high-factor
sunscreen (at least 30 SPF)
and protect the treated
area from sunlight for two
weeks following treatment.
Following treatment, avoid
the use of extremely hot
water and discontinue use of
abrasive or harsh products
for two days.
In cases where superficial
crusting or scabbing occurs,
do not rub, scratch or
remove the scab. Cleanse
the area gently and pat dry.
Makeup may be applied
immediately after treatment.
Since skin aging is an
ongoing process, you can
repeat Sensilift treatment
according to your needs.
•
•
•
•
•Make sure to turn o and
unplug the Sensilift before
cleaning.
It is recommended to clean
the Sensilift device from
excess of "Base Gel" with a
•
•

English
17
Troubleshooting
soft damp cloth or paper
towel. Make sure all
electrodes area including
the temperature sensors,
silicone cover, are cleaned
thoroughly.
Keep the Sensilift dry. Never
place, store or use Sensilift
near bathtubs, showers,
basins or other vessels
containing water as this may
cause severe electrocution.
If you do not plan on using
your Sensilift for a long
period of time, it is
recommended to keep it
clean and stored.
If you plan to travel and take
your Sensilift with you, you
should store it in the original
box and follow the
maintenance instructions.
•
•
•
If you experience any problems
with the Sensilift device, please
refer to the information below
to try to resolve it:
If the Sensilift device does
not turn on:
a. Make sure that the
power cord is plugged
properly into the electrical
outlet and into the device
power socket.
b. Make sure that the
power outlet has power.
•
•If the Sensilift does not
deliver RF signal energy (you
cannot feel a warm
sensation):
Verify there is full contact
with the skin and the “Base
Gel” was applied on the skin.
The RF signal will be
activated only when both of
the treatment fingers are in
full contact with the skin. See
Indicator stated in "User
interface description"
section.
General Error:
a. In case of dirt or debris
are stuck on the treatment
fingers, you should clean the
electrodes according to the
cleaning section. If you can't
get the area clean, contact
our Customer Service.
b. In case of a general error,
reset the device – unplug
the power cord from the
electrical outlet on the wall,
wait 10 sec and then
reconnect it.
c. If you still have problems
with your device, please
contact our customer
service.
•

English
18
Costumer Service
Device specification
parameters
The RF handheld device is
powered by (Bipolar RF) a
6±0.5 [Watt]
Frequency: 1±0.05 [MHz]
Selectable output power level:
3 levels
Mechanical speed:
Implemented by moving RF
electrodes Speed: 50-100 RPM
Temperature sensors: RF
heating is automatically
deactivated when skin
temperature reaches 40
[oC]/104[0F]. The heating is
reactivated when
temperature decreases.
855-SENSICA
(855-736-7422)
[e-mail]
For more information about
the Sensilift;
If your Sensilift is broken,
quits working, or you need
more assistance;
To order more “Base Gel” (for
additional treatments or if
your “Base Gel” is expired);
•
•
•
Treatment area ~2.2 [cm2] /
0.34[In²]
External Power Supply: Input
100-240 [VAC], 50-60 [Hz],
Output 9[VDC], 1.5[A]
Device Size and Weight:
140 [g], 173[mm] X 56.8[mm] X
53.1[mm] LxHxW
4.93[Oz], 6.8[In] X 2.23[In] X
2.09[In] LxHxW
ERP: 0.103µW
Frequency Modulation: CW
Storage Instructions
Storage and Transport
Conditions
Temperature
Humidity
Non-condensingPressure
Operational Conditions
Temperature
20% to 80% RHHumidity
10,000 ft.
Max
Operating
Altitude
-25 0C to 70 0C
(-130F to 1580F)
10% to 90% RH
at 550C/1310F
50C to 400C
(410F to 1040F)

English
19
MD 04150 A0
Labeling
Model: ST100xxyyzzz
FDA UDI: (01)05060445341125
(10)XYY
Power: 9 [V], 1.5 [A], 100-240
[VAC], 50-60 [Hz]
Double insulation
Consult Instructions
for use
Do not dispose
Please read all warnings
and safety precautions
prior to use
Keep dry
Type BF equipment
Keep away from eyes
Do not use the Sensilift
device on sensitive
tanned skin or after sun
exposure
Interference may occur
in the vicinity of
equipment
Use Sensilift only with
original power supply.
For your safety, never
use DC adapters which
are not approved by
the manufacturer.

20

Español
21
Índice de contenidos
Qué es Sensilift 22
Quién debería usar Sensilift y cómo decidir usar Sensilift
23
La seguridad de Sensilift 23
Descripción del dispositivo Sensilift
23
Cuándo no debe utilizarse Sensilft
26
26
27
28
29
29
Instrucciones de uso 30
Configuración del dispositivo 30
Cómo prepararse 30
Prueba preliminar 31
Cómo utilizar Sensilift
31
Protocolo de tratamiento recomendado
32
Zonas de tratamiento 33
Qué se debe esperar al utilizar Sensilift
34
Cuidados después del tratamiento facial
34
Limpieza y solución de problemas
34
Limpieza 34
Solución de problemas 35
Servicio de atención al cliente 36
36
© Todos los derechos reservados para EL Global Trade Ltd.
Parámetros de las especificaciones del dispositivo
Posibles efectos secundarios
Indicaciones de uso
Cómo funciona
22
22
Descripción del dispositivo manual
Descripción de la interfaz de usuario
24
25
Quiénes no pueden utilizar Sensilift - CONTRAINDICACIONES
Qué debe hacer para evitar daños graves – ADVERTENCIAS
Qué debe hacer para evitar otros daños – PRECAUCIONES
Beneficios
Intervalo habitual del tratamiento con Sensilift 32
Etiquetado 36

22
Español
Qué es Sensilift
Sensilift es un dispositivo de uso
doméstico para el tratamiento
no invasivo de las arrugas y
líneas de expresión faciales.
Sensilift aporta un planteamiento
completamente nuevo al
rejuvenecimiento no invasivo de
la piel gracias a la tecnología
Dynamic RF™ patentada por
Sensica, combinando la RF (radio
frecuencia) clínicamente
probada, utilizada normalmente
por médicos de todo el mundo
con el uso de unos cómodos
dedos de tratamiento.
Sensilift es un dispositivo de
venta libre pensado para el
tratamiento no invasivo de
arrugas y líneas de expresión
suaves a moderadas de mujeres
adultas que tienen un tipo de piel
Fitzpatrick de I a IV.
Una de las principales causas
de las arrugas de la piel es la
reducción de la cantidad y la
calidad de las fibras de
colágeno en la dermis y la
hipodermis (capas de piel).
las clínicas y centros de estética
desde hace mucho tiempo. Se
pudo comprobar que los
tratamientos de RF producían
un efecto térmico muy eficaz
sobre el tejido biológico. Como
resultado de la resistencia del
tejido al movimiento de los
electrones en el campo de RF se
genera calor. A continuación, el
calor subcutáneo genera nuevo
colágeno y mejora el colágeno
existente, lo que reduce las
arrugas y aporta mayor
elasticidad de la piel.
El tratamiento con Sensilift
produce un efecto térmico que
induce la reestructuración del
colágeno sin causar daños
termales ablativos en la
epidermis ni en la dermis.
El dispositivo Sensilift está
basado en una tecnología
exclusiva de radiofrecuencia
dinámica RF™. Esta tecnología
exclusiva combina la RF con
unos dedos de movimiento
rápido que aplican el
tratamiento. Esto hace que el
tratamiento de RF sea muy
efectivo y seguro y permite que
las múltiples ondas de RF
lleguen hasta un mayor número
de capas de piel y contribuyan
a lograr los mejores resultados,
visibles, estables y duraderos.
Indicaciones de uso:
Cómo funciona:
Presentación de la nueva
tecnología Dynamic RF™
La radio frecuencia (RF) es una
forma de energía
electromagnética utilizada en
Asegúrese de leer
detenidamente esta guía del
usuario antes de iniciar un
tratamiento con Sensilift.