Sercomm XHC3 User manual

i
XHC3
User’s Guide
Copyright 2020. All Rights Reserved.
Document Version: 3.0
Version
Date
Changes
2.1
8th Jul, 2021
1.Update Xfinity app setup
steps
2.Correct typo and format
2.0
1st July, 2021
Comcast made changes to
images and reworded
guidance
1.0
28 June, 2021
Initial Draft

Table of Contents
CHAPTER 1 INTRODUCTION...................................................................... 1
Overview............................................................................................... 1
Physical Details.................................................................................... 2
Package Contents ................................................................................ 4
CHAPTER 2 BASIC SETUP......................................................................... 5
Installation............................................................................................ 5
CHAPTER 3 WALL MOUNTING .................................................................10
APPENDIX A SPECIFICATIONS.................................................................12
Technical Specifications .....................................................................12
Regulatory Approvals .........................................................................13
Label Information ................................................................................15

1
Chapter 1
Introduction
Overview
XHC3 is an indoor only camera that supports full HD resolution and dual band
802.11ac Wi-Fi connectivity.
Features
Provides 1080p HD video quality
Supports Dual Band 2.4GHz/5GHz 802.11ac WIFI for connectivity and
Bluetooth 5.0 for onboarding
Two-way audio communication capability
Provides black and white night vision via built-in IR LEDs
1

2
Physical Details
Front View
Figure 1: Front View
Status LED
Off. No power or camera is paused from software app
Solid Amber. Camera is booting up.
Blinking Blue. Camera is ready to pair.
Solid Blue. Camera is connected to network and
working normally
Blinking Amber. Camera has trouble connecting
Lens
The lens is designed to support full HD video and
provides a wide field of view
Light Sensor
The light sensor is used to help detect daytime and
nighttime transitions to support day and night mode
operation
IR LEDs
The two IR LEDs are used to support night mode
operation.

3
Microphone
The built-in microphone is designed to capture ambient
sound and for bi-direction voice conversation.
Rear View
Figure 2: Rear View
Power Input
Connect the included power adapter here. Do not use
other power adapters; doing so may damage the
camera.
Reset Button
Gently press and hold this button for up to 10 sec and
then release, the camera reboots and the settings are
restored to factory default values.
Speaker
The built-in speaker is used for voice conversation.
Power Input
Reset Button
Speaker

4
Package Contents
The following items are included in the package.
XHC3 camera x 1
Power adapter x 1
Screw/Anchor x 1
Screw diameter: 3.5mm ; Length: 25mm
Anchor inner diameter: 2.9mm ; Length: 30mm
Figure 3: What’s in the Box

5
Chapter 2
Basic Setup
This section provides information on how to install and setup XHC3
Installation
1. Choose a location
Choose a suitable desired location anywhere inside
2. Power Up
Plug the included power cable into to the camera and plug the power
adapter into a standard power outlet.
CAUTION: Use only the power adapter
provided. Using a different one can result in
hardware damage.
Figure 4: Power Connection
The status LED is solid amber during bootup.
2

6
3. Check the status LED
After bootup is complete, and when camera is ready to be paired, the LED
is blinking blue.

7
4. Setup the Camera
4.1 Download the Xfinity app from the APP store or Google Play Store.
4.2 Sign in to the app with your Xfinity credentials.

8
4.3 Select Add a Device, then choose the Xfinity Camera to Start
installing
4.4 Follow the guidance in the APP to finish the onboarding process.
You can also use the camera functions in the same APP after
onboarding the camera