Serene Tetras User manual

Tetras 90cm Bed
10 Mins
Approximate
Assembly Time
1x2mtr
Required
Assembly Area
2 Person
Assembly
ASSEMBLY
INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
IMPORTANT :
Please inspect all items BEFORE assembly. If for any reason you need to return this
item, you must return it in it's original packaging. Assembled items CANNOT be
returned.
Revision no. : 01

Top
Tips before you start!
WARN N
1. Please check that all parts are present before you start the assembly of your
furniture, as once assembled, the furniture CANNOT be returned.
2. For ease and speed of assembly, we recommend that before you commence
each step of the assembly, that you iden fy all the parts required for that step.
We recommend that, where possible, all items are assembled near to the area
in which they will be placed in use, to avoid moving the product unnecessarily
once assembled.
. For the protec on of your furniture, par cularly items of high gloss finish, we
recommend that the product is placed on a protected surface during assembly to
prevent any damage.
. During assembly please take care not to over- ghten any fings, as this may
damage the product.
WARNING
3.
4
5
SAFETY
damage to the product.
2. Choking hazard - Keep small components away from young children. We recommend
children are kept well away from the assembly area.
TIPS & IMPORTANT SAFETY
Page 2

WARNING &
RECOMMENDATIONS
Top
Tips before you start!
WARN N
WARNING
SAFETY
Page 3
WARNING
1. Use this product for its specified purpose and funcon only.
2. If parts are missing, broken, damaged or worn, stop using this product unl you
have repaired it fully.
3. Make sure this product is placed on a flat level surface and is stable before use.
This product must make full contact with the surface before use.
4. This product is heavy. Use an assistant when liing.
FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY.
RECOMMENDATIONS
1. Please take the me to carefully read through the whole of these instrucons
before you commence with assembly.
2. Please periodically check all fings and re-ghten as necessary.
3. Wipe occasionally with a so cloth dampened with water. Then buff with a dry
clean so cloth.
4. Never allow any kind of liquid to remain on your furniture. Absorpon can cause
wood to warp or finishes to de-laminate.
5. Please check that the centre support rail is securely fixed in place.
6. Keep these instrucons for future reference.

Tetras 90cm Bed
ASSEMBLY INSTRUCTIONS
PA R TS LIST
1
Page 4
X1 pc 2X1 pc X2 pcs
13
X1 pc
4X12 pcs
5X 2 pcs
6X 2 pcs 7
A
M6
45mm
X2 pcs
B
M6
20mm
X
16 pcs
5cm
4cm
3cm
2cm
1cm
0cm
D
X2 pcs
F
X1 pc
6cm
C
X24 pcs
E
X1 pc

Page 5
ASSEMBLY INSTRUCTIONS
Tetras 90cm Bed
STAGE 1
3
B
B
F
B
F
1
2
3
3
6
6
7
7
STAGE 2
5
C
C
F
A
4
D
3
E