Serpent Medius X20 '21 User manual

1/10 SCALE ELECTRIC TOURING CAR
1/10 SCALE ELECTRIC TOURING CAR

The Serpent X20′21 m E dius is a state of the art 1/10 scale 4WD touringcar which will give you the true
•
•
•
DIFF ASSEMBLY…………………………………………….………4
DJC ASSEMBLY……….............…………………………………6
CVD ASSEMBLY…………………………………….......…………7
FRONT & REAR ASSEMBLY…………………………….…….…...8
MOTORMOUNT ASSEMBLY……………….……………………...11
REAR ASSEMBLY………….…………………………………….…13
•
FRONT ASSEMBLY…………………………..………………………16
•
•
•
•
ANTIROLLBAR ASSEMBLY…………………………………….....20
STEERING ASSEMBLY……………………..........……………...21
CENTRAL ASSEMBLY………………………........……………...24
SHOCK ASSEMBLY……………………………………........…...26
BUMPER ASSEMBLY…….........………………………………...28
FINAL ASSEMBLY…………………………………………..........30
EXPLODED VIEWS…………......………………………………...36
TEAM SERPENT NETWORK……………………………………....47
•
•
•
•
•
•
•
your Serpent X20′21 m
E dius Fine-tuning the initial setup is an essential part of building a high-performance
The exploded views and parts lists for the X20′21 m
E dius are presented in the Reference Guide

3
HOW TO USE THE MANUAL
Each step contains a variety of numbers, lines, and symbols. The numbers represent the order in
which the parts should be assembled. The lines are described below.
Each step contains a variety of symbols described below.
Assembly path of one item into another
Group of items (within lines) should be
assembled first
Direction the item should be moved
Glue one item to another
Press/Insert one item into another
Connect one item to another
Gap between two items
ICONS DESCRIPTIONLINES DESCRIPTION
Carefull, read and check very well.
Apply a small amount of cyano glue. Use wear protection for eyes and hands.
Detail view to explain assembly or order of parts better.
Default set-up: This symbol indicates the default setup.
Grease: apply a small amount of grease to the parts shown.
Left and right parts should be assembled in the same way.
Silicone oil: use the indicated silicone oil for the shocks and differentials.
Parts or items not included in the kit.
Optional part, not standard in the kit.
Thread lock: apply a small amount on the parts shown. Before to apply the threadlock,
make sure to degrease the parts very well, as otherwise the threadlock will not work.
Step number; the order in which you should
assemble the indicated parts
1 32
Length after assembly

Fill the differential with silicone oil 1 mm above the crosspin, do NOT
overfill. Use the silicone oil supplied in the kit. For the correct cst value
please check the defaultsetupsheet.
Use a digital scale to measure the
exact amount of oil in the diff.
Differential weight with volume
compensators = 11.5 grams
AMOUNT OF OIL IN
THE DIFFS
1.1 1.2
4x10x0.3
4x10x0.3
4x10x0.3
4x10x0.3
5x15x0.2
5x15x0.2
5x15x0.2
2x10
2x10
2x10
4
STEP 1 DIFF BAG
DIFF ASSEMBLY

1.3
M2.5x8
M2.5x8
M2.5x8
1.4
1.5
M3x8
M3x8
M3x8
5
STEP 1 STEP 1 SOLID AXLE BAG