Serta HARVARD User manual

TOLL FREE 1-877-693-8866 LIFESTYLE SOLUTIONS
Allen Key
1x Bolt 4x Leg 4x
DIAGRAM 1 DIAGRAM 2
PAGE 1 OF 2
ASSEMBLY INSTRUCTIONS
Avoid using sharp objects such as a knife to cut open the packing as you may accidentally damage the upholstery.
1. Carefully place sofa cushion on a clean flat surface. A flat configuration of the
sofa indicate that it is in bed position (refer opereting your unit on page 2).
2. Unpack hardware pack from the storage compartment (refer accessing storage
compartment on page 2).
3. Lift and place sofa cushion as shown in DIAGRAM 1 for assembly.
4. Align legs onto the predrilled hole and secure each leg with bolt using the
provided Allen key.
5. Finally, carefully lift and turn assembled unit onto its legs.
Sofa Cushion
1x
PARTS AND HARDWARE
Note: Individual parts are not shown to scale.
Pillow
2x
CAUTION: At least two adults are required to safely complete performing this task.
Other lifting attempts may risk back injury due to large and heavy part(s).

PAGE 2 OF 2 Rev.110222
OPERATING YOUR UNIT
Converting to Sofa or Lounger
Standing at the side of the unit (from bed position), lift backrest to the desired position and secure in place by releasing to
the sound of a click.
IMPORTANT: During conversion, ensure lifting is done from the back of backrest.
Converting to Bed
From sofa or lounge position, lift backrest all the way upwards until the last click is heard which unlocks the mechanism and
carefully return to a flat position.
Converting to Chaise
Ensure unit is in bed position. Facing sofa, lift right side of sofa seat (and backrest) to the desired chaise position.
LOUNGER
SOFA
CHAISEBED
Simply lift the sofa seat cushion up from the front.
Keep closed at all times.
ACCESSING STORAGE COMPARTMENT When not using storage compartment,
secure safety strap with velcro to sofa base.