Settop LD-40 User manual

USER’S MANUAL
laser
Distance
Meter
EK-118R EK-118R
EK-118GEK-118G
EK-118R
LD-40
LD-40
LD-40
EK-118G

2
EK-118R EK-118R
EK-118GEK-118G
EK-118R
LD-40
LD-40LD-40
EK-118G
USER’S MANUAL
BATTERY
LD-40 is powered by 2 x AA batteries. Battery status will be showed in initial screen.
In case if battery icon display continuously, it shows battery is about 1,000 measure times
left.
Low power indicator will be twinkling when battery is low.
To change new batteries, remove back lid and observing correct polarity when install new bat-
teries, then close back lid.

3
EK-118R EK-118R
EK-118GEK-118G
EK-118R
LD-40
LD-40LD-40
EK-118G
USER’S MANUAL
ovERviEw foR ld-40
A LCD
B Add
C Measure / Dina-Measure
D Measure Function:
Pythagoras
Area
Dimension
E Unit Switch
F Laser pointer
G Battery cover
H Substract
I Back-Light
J Power Button / Clear
K Reference Switch
/ Laser pointer
L Receive Window
M Corner measuring support
M
G
KE
D
C
B
A
J
H
I
L
F

4
EK-118R EK-118R
EK-118GEK-118G
EK-118R
LD-40
LD-40LD-40
EK-118G
USER’S MANUAL
ovERviEw foR SCREEN
1 Laser indicator
2 Indirect Measuring - Single Pythagoras - Sumary of two Pythagoras - Subtract of two Pythagoras
3 Measuring Function (Area Measuring - Volume measuring)
4 Measuring Reference
5 Add and Subtract
6 Maximum display
7 Minimum display
8 Main Screen and units
9 Battery Status
1
4
5
7
8
9
6
2
3

5
EK-118R EK-118R
EK-118GEK-118G
EK-118R
LD-40
LD-40LD-40
EK-118G
USER’S MANUAL
SPECifiCATioNS
Measuring Range 0.05M - 40M
Resolution 0,001M
Accuracy +-1.5mm
Measuring Speed 0.5 sec.
Laser Type 650 nm, Class II
Beam Size 25mm@30M
Battery 2 x AA Battery
Battery life Up to 10,000 measures
Dimension 110mm x 45mm x 30mm
Operation temperature -5ºC - 40ºC
TURN oN YoUR ld-40
Before starting, please make sure battery is installed properly.
Press once to activate LD-40.
Initial screen will flash seconds for checking status, helping you to check that LD-40 is ready to
work.
After checking, standby screen will be displayed.

6
EK-118R EK-118R
EK-118GEK-118G
EK-118R
LD-40
LD-40LD-40
EK-118G
USER’S MANUAL
MEASURiNG diSTANCE
Press to enable laser. Then, move the laser dot of LD-40 onto your target.
Once we keep the dot on the target, press again. The measured result appears on the
main screen.

7
EK-118R EK-118R
EK-118GEK-118G
EK-118R
LD-40
LD-40LD-40
EK-118G
USER’S MANUAL
MEASURiNG fRoM CoRNERS
The support, integrated into the base, allows us to measure from the corners. To do so, simply
remove the bracket and support it at the corner of the wall.

8
EK-118R EK-118R
EK-118GEK-118G
EK-118R
LD-40
LD-40LD-40
EK-118G
USER’S MANUAL
dYNA-MEASURiNG (CoNTiNUoUS MEASURiNG)
By default, it is always measured as a simple
To activate Dyna-Measuring (continuous measure), hold then it will jump to Dyna-
Measuring mode.

9
EK-118R EK-118R
EK-118GEK-118G
EK-118R
LD-40
LD-40LD-40
EK-118G
USER’S MANUAL
While we measure the minimum value is recorded on the screen
To end the Continuous mode press or
To re-start the Continuous mode presss
To quit Continuous mode and back to normal mode, press

10
EK-118R EK-118R
EK-118GEK-118G
EK-118R
LD-40
LD-40LD-40
EK-118G
USER’S MANUAL
MEASURiNG fUNCTioN. AREA MEASUREMENT
Press once for enabling Area measuring.
Press to activate the laser beam.
Follow the instructions on main screen to measure widht and lenght.

11
EK-118R EK-118R
EK-118GEK-118G
EK-118R
LD-40
LD-40LD-40
EK-118G
USER’S MANUAL
Once you finish all measurements, area is showed on screen.
To change the display units, press

12
EK-118R EK-118R
EK-118GEK-118G
EK-118R
LD-40
LD-40LD-40
EK-118G
USER’S MANUAL
volUME MEASUREMENT
Press twice to enter volume measuring.
Press to enable laser beam.
Follow the instructions on main screen to measure width, length and height.

13
EK-118R EK-118R
EK-118GEK-118G
EK-118R
LD-40
LD-40LD-40
EK-118G
USER’S MANUAL
Once you finish all instructions, volume is showed on screen.
To change display units, press

14
EK-118R EK-118R
EK-118GEK-118G
EK-118R
LD-40
LD-40LD-40
EK-118G
USER’S MANUAL
iNdiRECT MEASUREMENT (PYThAGoRAS)
Press until Indirect measurement symbol appears on the screen.
LD-40 uses the Pythagorean theorem to measure Indirect distance.
Press to enable laser beam
and follow he instructions on screen
to get slang and horizontal range.

15
EK-118R EK-118R
EK-118GEK-118G
EK-118R
LD-40
LD-40LD-40
EK-118G
USER’S MANUAL
Once completed the measures, the height is showed on the display
To change the measure units press

16
EK-118R EK-118R
EK-118GEK-118G
EK-118R
LD-40
LD-40LD-40
EK-118G
USER’S MANUAL
MEASURiNG REfERENCE
By default, reference is set at rear.
LD-40 has three reference: rear, front and pintail.
To change the references, press and each press will change the measurement area

17
EK-118R EK-118R
EK-118GEK-118G
EK-118R
LD-40
LD-40LD-40
EK-118G
USER’S MANUAL
MEASURiNG UNiTS
To change measuring units, press
Unit will be switched by each hold.

18
EK-118R EK-118R
EK-118GEK-118G
EK-118R
LD-40
LD-40LD-40
EK-118G
USER’S MANUAL
Add YoUR MEASUREMENTS
To add a measurement, simply press
The icon will display in main screen and you could see what you had added.
SUBTRACT YoUR MEASUREMENTS
To subtract measurements to the memory simply press
The icon will display in main screen and you could see what you had subtracted.

19
EK-118R EK-118R
EK-118GEK-118G
EK-118R
LD-40
LD-40LD-40
EK-118G
USER’S MANUAL
BACk-liGhT SwiTCh
To enable and disable back-light for LD-40, press
After 10 seconds, it will switch off automatically
lASER PoiNTER SwiTCh
To enable Laser Pointer, hold the button for 2 seconds
The icon will flash on the display

Laser distance
meter handheld,
easy, accurate and
small.
Bofarull, 14, bajos 08027 Barcelona
Tel. [phone] Fax [phone]
www.settop.es [email protected]
Bofarull, 14, bajos 08027 Barcelona
Tel. [phone] Fax [phone]
www.settop.es [email protected]
Bofarull, 14, bajos 08027 Barcelona
Tel. [phone] Fax [phone]
www.settop.es [email protected]
EK-118R EK-118R
EK-118GEK-118G
EK-118R
LD-40
LD-40
LD-40
EK-118G