Seuic Autoid 9 series User manual

6 1 2
QUICK START GUIDE
JIANGSU SEUIC TECHNOLOGY CO.,LTD
（Picture 1: 17 keys）
（Picture 2）
Install battery and battery cover
Take out the device and battery from the package. Install
the battery and battery cover in according to Picture 2.
Initial use
Initial use or initial opening some applications, the system
will pop up quick tips to guide you on how to use PDA.
Power on
Install SIM card and SD card
Technical Support
Apply series：
series
9
（Picture 3: 22 Keys）
9 HC
Charge the device
Power off
series
NEW
NEW
Long press power key until PDA vibrates.
Long press the power key to show the options menu, and
then click the Power off option.
Remove the battery, and insert SIM card into the left card
slot.（Note: This device does not support small card）, insert
the card in accordance with the instruction below the deck
until you hear a clicking sound. The right card slot is for SD
card, same operating way with SIM card.
The device could be charged through USB cable or Single-slot
Charging Dock.
USB cable: Use USB cable to connect adapter or PC for
charging. Red indicator of PDA means under charging, green
indicator means fully charged.
Charging dock: First place device into the charging dock, then
plug the charger into the power port of the dock. Red indicator
means under charging, green indicator means fully charged.
Note: Single-slot charging dock and USB cable cannot be
used simultaneously.
If the device will not be used for a long time, please charge
it at least once every two months to ensure the back up
battery won't over discharge.Over discharge will be risky of
battery swollen and decrease battery life expectancy.
Please visit SEUIC's official website www.chinaautoid.net to
download User Manual, SDK, different Apps or software in
order to help you better use the device.
2017 SEUIC Company. All rights reserved.
It is strictly prohibited to copy, transfer, distribute and store
any content in the document in any form without the SEUIC's
permission.
JIANGSU SEUIC TECHNOLOGY CO.,LTD
Company address: NO.15 Xinghuo Road,Nanjing New High
Technology Industry Development Zone,Nanjing City,Jiangsu
Province,China
TEL: [phone]
Company official website: www.seuic.com
Products official website: www.chinaautoid.net
Mailbox: [email protected]
Post code: 210061
Do not throw away : Apply to some electronic components,
such as battery, etc., some components may cause an explosion,
pollution or other adverse consequences to the environment,
and should be used for recycling.
Environmental protection life span mark: The number in this
logo means that the normal environmental protection life span
is 10 years, harmful substances or elements contained in the
product during this period will not be disclosed, will not cause
serious pollution to the environment or its personal, property
damage. Some parts may also have environmental protection
use period logo, its environmental protection service life is
identified by the number.

Environmental protection related signs
Common functions
Connect with PC
WIFI connection
Charge the Battery
34 5
Battery
Indicator light
Micro USB connect
Trouble Shooting
SAR
Declaration of hazardous substances in product
Attention
Barcode scanning
Device slot
Indicator light
（Picture 4：Single-slot Charging Dock）
（Picture 5：Battery Charger）
Connect your PDA with PC via USB cable or charging dock.
SEUIC's scan tool and customers' scan tool applications are
optional to scan the barcodes.
Frequently asked questions：
1.There is no light when scanning. Please check whether the
scan engine is closed, if closed, please go to the settings of
scan tool to turn it on.
2.One scanning results in two barcodes. Please check whether
the built-in scan tool and the third party application are running
simultaneously. If yes, close the built-in scan tool and set it to
“not Automatically open when power on”.
1. Click “settings” in main screen.
2. In “wireless and networks”, turn on Wi-Fi.
3. PDA will automatically search and list the available Wi-Fi.
4. Please select the one that you want, and then click it
to connect. If you select a secured network, you will need
to input password.
Note: If WLAN and mobile data are opened simultaneously,
WLAN take precedence. When WLAN is turned off, it will pop
up whether to use mobile data if it's available.
1. Do not soak USB port and tail plug of PDA into water.
2. Please close 2D scan engine when you are not using it,
don't keep it open for a long time.
3. Please do not directly look into the light beam of scan
engine during scanning in order to avoid possible injury.
4. Please first connect the USB cable or charging dock to
device, and then connect to the USB port in PC.
5. Please restarting the device after replacing the SIM or
SD card.
network mode.
2. PDA and PC cannot be connected, please check whether the
USB cable and the PDA are correctly connected.
3. If the device can't go to sleep mode, please check whether
network data exchange is working, or whether Flash and
NAND is in the operating processes of reading and writing data.
1. Unable to connect to the Internet after inserting SIM/UIM
card, please check whether your SIM/UIM card is out of service;
then check whether PDA supports the corresponding
LTE/WCDMA/EVDO/TD-SCDMA/GSM connection
When you insert 4G SIM card, please first select network
mode, and then PDA will be registered to the corresponding
4G network.
Note: when you do not use the network service, please close
the data service in time to extend the standby time and save
data.
Maximum SAR≤2.0W/kg,meet the requirements of national
standards:GB 21288-2007.
Toxic or hazardous substances or elements
Pb Hg CdCr6+PBB PBDE
Host ×○○○○○
Charger ×○○○○○
Battery ○○ ○ ○○○
Accessories ○○○○○○
Component
name
○：It indicates that the content of the toxic and hazardous
substances in all homogeneous materials in the parts is below
the requirements set by GB/T26572.
×：The content of the harmful substance in a homogeneous
material at least in the part exceeds the limit set by the
GB/T26572, and there is no mature alternative in the industry,
meeting EU RoHS environmental protection requirements.
Mainly used for materials and Technology Standard
Specification for electrical and electronic products, to make it
more conducive to human health and environmental protection.
The purpose of this standard is to eliminate the Pb, Hg, Cd,
Cr6+, PBB, PBDE, and a total of 6 substances in the electronic
products, and focus on the content of Pb cannot be more than
0.1%.
Placed the battery into the battery charger and connect it to
power supply. Red indicator means charging; green indicator
means it has been fully charged.