
20
Temperature selection buttons
The appropriate temperature for the
particular type of tea can be selected using
the +/– buttons on the control panel.
Water temperatures for making tea
We recommend the following
temperatures:
Green tea : 70-80 °C
White tea : 80 °C
Oolong tea : 90 °C
Black tea : 100 °C
Herbal tea : 100 °C
Note: Please also refer to the tea
manufacturer’s instructions.
∙The current water temperature in the
container (20 °C) is shown on the
display.
∙Pressing the + key increases the
temperature selection in 5-degree steps.
∙Pressing the – key decreases the
temperature selection in 5-degree steps.
∙The appliance cannot be started if the
current temperature inside the container
exceeds the selected temperature.
∙Temperatures below 40 °C cannot be
selected.
Automatic switch-off
Unless the keep-warm function has
been selected, the kettle will switch off
automatically around 15 minutes after the
last operation.
In the keep-warm mode, it switches off after
30 minutes.
Before using for the first time
∙Unpack the appliance completely and
remove all packaging materials.
∙To clean the kettle, boil (with the tea filter
in place) and discard the first filling of
water.
Operation
Heating water
∙Remove the water container from its
base; then turn the lid insert anti-
clockwise (UNLOCK) and take it off.
∙Fill the container with water to the desired
level, observing the Min (0.5 l) and Max
(1.7 l for heating water) markings.
∙Replace the lid insert and turn clockwise
(LOCK) until it is heard locking into place.
∙Place the container back on its base.
∙Insert the plug into a suitable wall socket.
A beep signal is heard and the display
shows C, followed by the current water
temperature inside the container.
∙Use the +/– buttons to set the desired
temperature, and then confirm by
pressing the On/Off button ( ). The
indicator light comes on.
∙The heating process begins. Once the
pre-set temperature has been reached,
the appliance is automatically switched
off; three short beep signals are heard
and the indicator light goes out.
∙The boiling process may be interrupted
by pressing the On/Off button twice.
∙To pour hot water, remove the container
from its base.
∙To prevent hot steam from being emitted,
ensure that the lid remains closed while
pouring out the water.