SHANGRI-LA SLORLAWBSNA User manual

ORLANDO WOOD BED
SINGLE
SLORLAWBSNA, SLORLAWBSWA

COMPONENTS
1
2
4
4
4
4
1
4
2
4
6

Hardware
A Úx4ÛB(x8) C(x8)
D(x8) E(x8) F(x8)
G(x1) J(x52) N(x6)

Step 1: Secure A into the middle hole either side of part 1.
Repeat this process with the remaining part labelled 1. This will create two end assemblies.
A (x4)
ASSEMBLY
Note:
Do not use power tools to assemble this bed as it may damage the components.
A
A
1
x2

Step 2: Ensuring the hole on B is facing outward, secure B into one part labelled 2. Insert C
into B as shown below.
Repeat this process with the remaining part labelled 2. This will create two side assemblies.
B(x8) C(x8)
B
B
C
C
2
B
C
x2

Step 3: Align the holes on end assemblies and connect them to the side assemblies. This
will result in C to protrude through the holes on the top of the side assemblies.
Inside one top hole, insert D, Eand F over C. Using the G wrench, tighten F to secure into
place. Repeat this process with the remaining seven top holes.
D(x8) E(x8) F(x8) G(x1)
C
C
D
E
F
F
G
x8

Step 4: Ensuring N is facing down, align and insert Ninto the holes shown in the example
below. Using a Phillips screwdriver (not supplied), secure N with J screws.
J(x24) N(x6)
✗
✓
J
J
J
J
N

Step 5: Twist and secure parts labelled 4 onto the side and end assemblies as shown below.
Step 6: Using a Phillips screwdriver (not supplied), secure parts labelled 6onto the bed with
Jscrews.
J(x28)
4
4
4
4
4
4
6
J

Assembly complete.

NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com