Shark HV390UK Series User manual

HV390UK_QSG_171215
For questions or to register your product, contact us on
0800 862 0453 or visit us online at sharkclean.eu
Please make sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
©2017 Eruo-Pro Europe Ltd. SHARK is a registered trademark of Eruo-Pro Europe Ltd.
DUOCLEAN and FLEXOLOGY, and SHARKFLEX are trademarks of Euro-Pro Europe Ltd.
STORE ANYWHEREREACH ANYWHERE
FLEXOLOGY
Flexology
Lock Release
Flexology
Lock Release
Carry
Handle
HV390UK Series
CORDED VACUUM WITH FLEXOLOGY™
Use this Quick Start Guide
to start using your new
vacuum’s great features.
QUICK
START
GUIDE
To store, wrap the cord anti-clockwise
around the hooks whilst in upright mode.
Then press the Flexology Lock Release
and gently fold forwards.
To use the vacuum in upright mode
again, unwind the cord then press the
Lock Release while lifting the handheld
vacuum until the wand locks into place
Easily access hard-to-reach areas under
furniture. Press the Flexology Lock
Release button to lower the angle of the
wand to increase your reach.
Cool Gray 8c K
HV390UK_QSG_171215
UV VARNISH COATING OVER ALL

NOTE: For best performance,
use Setting I for all above-floor
accessories.
To detach the wand from the handheld
vacuum, press the Wand Release button
on the top of the wand.
To disconnect the wand from the floor
nozzle, stand the vacuum upright, step
on the foot pedal, and pull the wand up.
Floor Nozzle Release
Wand
Release
Wand Release
OR
ABOVE-FLOOR CLEANING
VERSATILE FLOOR-TO-CEILING CLEANING
AHandheld Vacuum
BMotorised Floor Nozzle
CFlexology Wand
DCrevice Tool
EDusting Brush
FMotorised pet Tool
A
B
C
ASSEM B LY
2
(Click)
1
(Click)
E F
WHAT’S INSIDE:
D
For additional parts and accessories,
visit sharkclean.eu
The top flap of your box shows the select
accessories that are included with your model.
For complete instructions, see enclosed
Owner's Guide.
Setting II
Deep cleans
carpets by removing
embedded dirt.
Setting I
Gentle on hard
floors and delicate
area rugs.
FLOOR CLEANING
Plug in the Vacuum
Place your foot gently on the floor
nozzle and tilt the handle back.
Choose Setting
Slide the power switch to appropriate
speed setting (I or II) and start cleaning.
Attach desired cleaning accessory
to wand or handheld vacuum.
E
Cool Gray 8c K
HV390UK_QSG_171215
UV VARNISH COATING OVER ALL