Sharp AQUOS LC-32D62U User manual
SHAR~
AQuas
HIGH-DEFINITION
MULTIMEDIA
INTERFACE
r-
......
l
1
II~
NYCE
• t DT./
'§@i§;JW4it.!i
tHIGH-DEFINITION TELEVISION
HOml™
NOM
1245
D[]
IDOLBYI
DIGITAL
LIQUID CRYSTAL TELEVISION
TELEVISEUR
ACL
TELEVISOR CON
PANTALLA
DE
CRISTAL LiQUIDO
OPERATION MANUAL
MODE D'EMPLOI
MANUAL DE OPERACION
LC-32D62U
LC-37D62U
LC-32D62U
LC-37D62U
LIQUID CRYSTAL TELEVISION
ENGLISH
OPERATION MANUAL
•The illustrations and on-screen displays
in
this operation
manual are for explanation purposes and may vary slightly from
the actual operations.
•Menu items that are not selectable are grayed out.
•The examples used throughout this manual are based on the
LC-37D62U model.
IMPORTANT:
To aid reporting
in
case
of
loss or theft, please record the
1V's
model and serial numbers
in
the space provided. The
numbers are located at the rear
of
the
N.
Model No.:
Serial No.:
IMPORTANT INFORMATION
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
•
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrow-head
symbol, within
an
equilateral triangle,
is intended
to
alert the user
to
the
presence
of
uninsulated "dangerous
voltage" within the product's
enclosure that may be of sufficient
magnitude
to
constitute arisk of
electric shock
to
persons.
The exclamation point within a
triangle is intended
to
alert the user
to
the presence
of
important
operating and maintenance
(servicing) instructions
in
the
literature accompanying the product.
@-1
IMPORTANT INFORMATION
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
CAUTION:
DO NOT PLACE THIS PRODUCT ON AN UNSTABLE
CART,
STAND, TRIPOD, BRACKET, OR TABLE.
THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO
THE PRODUCT. USE ONLY WITH ACART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED
BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER'S
INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES
RECOMMENDED BY THE MANUFACTURER. APRODUCT AND CART COMBINATION SHOULD BE
MOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES MAY CAUSE
THE PRODUCT AND CART COMBINATION TO OVERTURN.
WARNING: FCC Regulations state that any unauthorized changes or modifications
to
this equipment not expressly
approved by the manufacturer could void the user's authority
to
operate this equipment.
CAUTION:
This product satisfies FCC regulations when shielded cables and connectors are used
to
connect the unit
to
other
equipment.
To
prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded
cables and connectors for connections.
DECLARATION OF CONFORMITY:
SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-32D62U/LC-37D62U
This device complies with Part 15
of
the FCC Rules. Operation is subject
to
the following
two
conditions:
(1)
This device may not cause harmful interference, and
(2)
this device must accept any interference
received, including interference that may cause undesired operation.
RESPONSIBLE
PARTY:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
TEL: 1-800-BE-SHARP
For Business Customers: URL http://www.sharpusa.com
INFORMATION:
This equipment has been tested and found
to
comply with the limits for aClass Bdigital device, pursuant
to
Part 15
of
the FCC
Rules. These limits are designed
to
provide reasonable protection against harmful interference
in
aresidential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in
accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in aparticular installation. If this equipment does cause harmful interference to radio
or
television reception, which can be
determined by turning the equipment off and on, the user
is
encouraged to try
to
correct the interference by one or more
of
the
following measures:
-Reorient
or
relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into
an
outlet on acircuit different from that
to
which the receiver is connected.
-Consult the dealer or
an
experienced radiofTV technician for help.
"Note
to
CATV
system installer: This reminder is provided
to
call the
CATV
system installer's attention
to
Article 820-40
of
the National
Electrical Code that provides guidelines for proper grounding and,
in
particular, specifies that the cable ground shall be connected
to
the
grounding system
of
the building, as close
to
the point of cable entry as practical."
This product utilizes tin-lead solder, and fluorescent lamp containing asmall amount
of
mercury. Disposal
of
these materials may be
regulated due
to
environmental considerations. For disposal or recycling information, please contact your local authorities orthe
Electronic Industries Alliance: www.eia.org
Trademarks
•Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks
of
Dolby
Laboratories.
•"HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks
of
HDMI
Licensing LLC."
•Products that have earned the ENERGY
STAR®
are designed
to
protect the environment through superior energy
efficiency.
@-2
DEAR SHARP CUSTOMER
Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years
of trouble-free operation of your product, please read the Important Safety Instructions carefully before
using this product.
IMPORTANT SAFETY INSTRUCTIONS
Electricity is used
to
perform
many
useful functions,
but
it can also
cause
personal injuries
and
property
damage
if
improperly
handled. This
product
has been engineered
and
manufactured
with
the
highest priority
on
safety.
However,
improper
use can result in electric
shock
and/or
fire. In
order
to
prevent potential danger, please
observe
the
following
instructions
when
installing, operating
and
cleaning
the
product.
To
ensure
your
safety
and prolong
the
service life
of
your
Liquid Crystal Television, please read
the
following
precautions
carefully
before using
the
product.
1) Read
these
instructions.
2)
Keep
these
instructions.
3)
Heed all warnings.
4)
Follow all instructions.
5)
Do
not
use
this
apparatus
near
water.
6)
Clean
only
with
dry
cloth.
7)
Do
not
block
any
ventilation openings. Install in
accordance
with
the
manufacturer1s instructions.
8)
Do
not
install near
any
heat
sources
such
as radiators,
heat
registers, stoves,
or
other
apparatus
(including
amplifiers)
that
produce
heat.
9)
Do
not
defeat
the
safety
purpose
of
the
polarized
or
grounding-type
plug. Apolarized
plug
has
two
blades
with
one
wider
than
the
other. A
grounding
type
plug has
two
blades
and a
third
grounding
prong.
The
wide
blade
or
the
third
prong
are
provided
for
your
safety. If
the
provided
plug
does
not
fit
into
your
outlet,
consult
an electrician
for
replacement
of
the
obsolete
outlet.
10)
Protect
the
power
cord
from
being
walked
on
or
pinched
particularly
at
plugs,
convenience
receptacles,
and
the
point
where
they
exit
from
the
apparatus.
11) Only use
attachments/accessories
specified
by
the
manufacturer.
12)
Use
only
with
the
cart,
stand,
tripod,
bracket,
or
table
specified
by
the
manufacturer,
or
sold
.....
,
with
the
apparatus. When a
cart
is used, use caution
when
moving
the
cart/apparatus
L_
combination
to
avoid injury
from
tip-over.
13)
Unplug
this
apparatus
during
lightning
storms
or
when
unused
for
long
periods
of
time.
14) Refer all servicing
to
qualified service personnel. Servicing is required
when
the
apparatus
has been
damaged
in
any
way,
such
as
power-supply
cord
or
plug
is
damaged,
liquid has been spilled
or
objects
have fallen
into
the
apparatus,
the
apparatus
has been
exposed
to
rain
or
moisture,
does
not
operate
normally,
or
has been
dropped.
Additional
Safety
Information
15)
Power
Sources-
This
product
should
be
operated
only
from
the
type
of
power
source
indicated
on
the
marking label. If
you
are
not
sure
of
the
type
of
power
supply
to
your
home,
consult
your
product
dealer
or
local
power
company. For
products
intended
to
operate
from
battery
power,
or
other
sources, refer
to
the
operating instructions.
16) Overloading-Do
not
overload
wall outlets, extension cords,
or
integral
convenience
receptacles as
this
can result in arisk
of
fire
or
electric
shock.
17)
Object
and
Liquid
Entry-Never
push
objects
of
any
kind
into
this
product
through
openings
as
they
may
touch
dangerous
voltage
points
or
short-out
parts
that
could
result in afire
or
electric
shock.
Never spill
liquid
of
any
kind on
the
product.
18) Damage Requiring
Service-
Unplug
this
product
from
the
wall
outlet
and
refer servicing
to
qualified
service personnel
under
the
following
conditions:
a)
When
the
AC
cord
or
plug
is
damaged,
b) If liquid has been spilled,
or
objects
have fallen
into
the
product,
c)
If
the
product
has been
exposed
to
rain
or
water,
d) If
the
product
does
not
operate
normally
by
following
the
operating instructions.
Adjust
only
those
controls
that
are covered
by
the
operating
instructions
as
an
improper
adjustment
of
other
controls
may
result in
damage
and will often require extensive
work
by
aqualified
technician
to
restore
the
product
to
its
normal operation,
e)
If
the
product
has been
dropped
or
damaged
in
any
way, and
f) When
the
product
exhibits
a
distinct
change
in
performance
-
this
indicates
aneed
for
service.
19) Replacement
Parts-When
replacement
parts are required,
be
sure
the
service
technician
has used
replacement
parts
specified
by
the
manufacturer
or
have
the
same
characteristics
as
the
original part.
Unauthorized
substitutions
may
result in fire, electric
shock,
or
other
hazards.
20) Safety
Check-Upon
completion
of
any
service
or
repairs
to
this
product,
ask
the
service
technician
to
perform
safety
checks
to
determine
that
the
product
is in
proper
operating
condition.
21)
Wall
or
ceiling
mounting-When
mounting
the
product
on awall
or
ceiling,
be
sure
to
install
the
product
according
to
the
method
recommended
by
the
manufacturer.
@-3
IMPORTANT SAFETY INSTRUCTIONS
•Water and Moisture -Do not use this product near water -for example, near abath tub, wash
bowl, kitchen sink, or laundry tub;
in
awet basement; or near aswimming pool; and the like.
•Stand -Do not place the product on
an
unstable cart, stand, tripod or table. Placing the
product on an unstable base can cause the product
to
fall, resulting
in
serious personal injuries
as well as damage
to
the product. Use only acart, stand, tripod, bracket or table recommended
by the manufacturer
or
sold with the product. When mounting the product on awall, be sure
to
follow the manufacturer's instructions. Use only the mounting hardware recommended by the
manufacturer.
•Selecting the location -Select aplace with no direct sunlight and good ventilation.
•Ventilation -The vents and other openings
in
the cabinet are designed for ventilation. Do not
cover or block these vents and openings since insufficient ventilation can cause overheating
and/or shorten the life
of
the product. Do not place the product on abed, sofa, rug or other
similar surface, since they can block ventilation openings. This product
is
riot designed for built-
in
installation;
do
not place the product
in
an enclosed place such as abookcase or rack, unless
proper ventilation
is
provided
or
the manufacturer1s instructions are followed.
•The Liquid Crystal panel used
in
this product
is
made
of
glass. Therefore, it can break when the
product
is
dropped or applied with impact. Be careful not
to
be injured by broken glass pieces
in
case the panel breaks.
•Heat -The product should be situated away from heat sources such as radiators, heat
registers, stoves, or other products (including amplifiers) that produce heat.
•The Liquid Crystal panel
is
avery high technology product with 6,220,800 thin film transistors, giving you fine picture details.
Occasionally, afew non-active pixels may appear on the screen as afixed point
of
blue, green
or
red. Please note that this
does not affect the performance
of
your product.
Precautions when transporting the TV
•Be sure
to
always carry the TV by
two
people holding it with
two
hands -one hand on
each side
of
the
TV.
•Lightning -For added protection for this television equipment during alightning storm, or G
when it
is
left unattended and unused for long periods
of
time, unplug it from the wall outlet
and disconnect the antenna. This will prevent damage
to
the equipment due
to
lightning and
~
power-line surges.
•Power Lines -An outside antenna system should not be located
in
the vicinity
of
overhead
power lines or other electric light
or
power circuits, or where it can
fall
into such power lines
or circuits. When installing an outside antenna system, extreme care should be taken
to
keep
from touching such power lines
or
circuits as contact with them might be fatal.
@)-4
IMPORTANT SAFETY INSTRUCTIONS
•Outdoor Antenna Grounding -If an outside antenna
is
connected
to
the television equipment, be sure the antenna
system
is
grounded so as
to
provide some protection against voltage surges and built-up static charges.
Article 810
of
the National Electrical Code, ANSI/NFPA 70, provides information with regard
to
proper grounding
of
the mast
and supporting structure, grounding
of
the lead-in wire
to
an
antenna discharge unit, size
of
grounding conductors, location
of antenna-discharge unit, connection
to
grounding electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS
PER
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
NEC -NATIONAL ELECTRICAL CODE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
~~-
GROUND CLAMPS
":"~
POWER SERVICE GROUNDING ELECTRODE
SYSTEM
(NEC ART 250, PART
H)
r.
To prevent fire, never place any type
of
candle or flames on the
top
or near the TV set.
CJ
-
~
~
•To prevent fire or shock hazard,
do
not expose this product
to
dripping or splashing.
No objects filled with liquids, such as vases, should be placed on the product.
•To prevent fire or shock hazard,
do
not place the AC cord under the TV set or other heavy
items.
•Turn off the main power and unplug the AC cord from the wall outlet before handling.
•Use asoft cloth and gently wipe the surface
of
the display panel. Using ahard cloth may
~
scratch the panel surface.
~
•Use asoft damp cloth
to
gently wipe the panel when it
is
really dirty.
(It
may scratch the panel surface when wiped strongly.)
•
If
the panel
is
dusty, use an anti-static brush, which
is
commercially available,
to
clean it.
•To protect the panel,
do
not use adirty cloth, liquid cleaners or chemical cloth
to
clean
it,
such materials may damage the panel surface.
•To clean the outer cabinet, use the same method. Do not use liquid or aerosol cleaners.
•Do not display astill picture for along time, as this could cause an afterimage
to
remain.
@-5
direction.
e
Attach
the
stand
in
the
follow
the
ins;trulction:s.
lr1i~nlr!"A.~t
irlst':illaltion
stand unit onto
- 6
or
rlYnnvv,,-j
or
im()ac1:ed.
POWER
AQUaS
TAI8VISI()n
onAQUaS
TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
7
h<:lt-tont:lC
in
the remote control unit.
3Close cover.
'nrl',.,,.,t,,.-,,," on AQUOS television should power to the AQUOS
AQUOS
T818VISIC)n
still
power up,
TV
POWER
on
IMPORTANT:
THE UNIT DOES NOT POWER ON UNPLUG THE AQUOS TELEVISION FROM THE OUTLET AND REPEAT
THE INSTALLATION STEPS.
IF
YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT -800-BE-SHARP.
to
BASIC ADJUSTMENT SETTINGS SECTION for
EZ
and basic channel
and USING EXTERNAL EQUIPMENT SECTION for other device connections
(DVD,
VCR, AUDIO,
AQUOS manual.
- 8
functions
in
your
31
shown on
eqLllpnrlent
""
"30
Dimensional
drawings
tit The dimensional drawings for
LCD
inside back cover.
V-CHIP
Other
viewing
options
46
~vC>,C>7ir'rI
images .
I-JroC'otjlinn
remote control function .
Appendix
50
Removing the stand 50
Setting the TV on the wall 50
Troubleshooting
51
Troubleshooting-Digital broadcasting
51
Specifications.................................................. 52
Optional accessory 52
Calling
for
Service
54
LIMITED WARRANTY
54
PC
r"r\,-nn·",tih,ilih
f
Watching
Turning off 6
Initial setup 17
button for
rhc)nnlinn
channels 1
Anl"v,.,1"AY"C'
for
r"l'v>nt"'"nrl
volume/sound 19
stereo mode 20
Setting Digital broadcasting audio mode 20
Basic
adjustment
settings
21
Menu buttons
21
On-Screen Display
21
Menu items for TV/INPUT 1/2/3 22
Menu items for HOMI 22
EZ
23
23
................................... 24
.................................... 25
Picture 26
OPC setting 26
Advanced picture adjustments 27
Color 27
Black 27
3D-Y/C 27
Monochrome 27
Film
Mode 27
of 27
............................................ 28
.......................................................... 28
Power Control 29
..................................................... 29
................................................. 29
Contents
9
Part
names
10
TV
IMPORTANT INFORMATION 1
Trademarks
.•..••••••.••.•.....••••••...••.••....•...................... 2
DEAR SHARP CUSTOMER 3
IMPORTANT SAFETY INSTRUCTIONS 3
Supplied
accessories
6
QUICK
REFERENCE 6
@-9
10
HDMI (INPUT
4)
HDMI
AUDIO OUTPUT
AUDIO (INPUT
in
~
F-type
connector
should be
~
tightened
only.
TV
do
(round)
Connecting
Antenna Cable
Cable
without
aCATV
converter
VHF/UHF antenna
Combination
VHF/
UHF antenna
Separate VHF/UHF
antenna
Cable
TV
lead-In
'"
Connect
the
antenna cable
to
the
TV using one
of
the
methods
in
the
illustration
as
shown
<CD,
(g),
@
or
@}.
®12
or
2)
Example
disc HD-DVD
component
cable. 1
or
3)
Audio
(commerciallyavallaole)
nl~v~r'/HI)-IJIVn
playerl
STBto
using component and
@-
13
When VCR/Game
console/Camcorder
comJ,:~os;lte
cable.
VCR/Game
console/Camcorder
HOMI
equipment
@-14
HDMI
terminal.
4
or
5)
XGAand
WXGA
PC
Resolution
x
Horizontal Frequency Vertical Frequency
70
70
Hz
75 Hz
60
Hz
VESA Standard
o
o
o
o
o
o
o
o
o
o
o
@-
15
TV
POWER on the
Press
POWER
on the
TV,
or
TV
POWER the
remote control unit.
TV
TV program
POWER
TV
POWER (On/Standby)
8 G 8
REC
m
8
(3
TV
status indicator (POWER)
TV
status indicator
(Ope)
TV
status indicator (SLEEP)
@16
18
VOL
CH
SURROUND(J
o -
AQuas
Method
1or
to
To
select
(e. g., Channel 5):
,
for
Mute
\\
MUTE
on
the
remote
control unit
current sound output.
II
Using SURROUND on the
remote
control unit
Volume
adjustment
Audio
status
choosing "Surround"
natural, realistic
Surround sound options
On: Makes it
POE;slble
sound.
Off: the normal sound.
®19
Other manuals for AQUOS LC-32D62U
3
This manual suits for next models
1
Other Sharp LCD TV manuals
Sharp
Sharp LC-60C46U User manual
Sharp
Sharp LC-40LE340E User manual
Sharp
Sharp Aquos LC-13S1U User manual
Sharp
Sharp Aquos LC-32LD166K User manual
Sharp
Sharp LC-15B8U-S User manual
Sharp
Sharp LC-22LE250E User manual
Sharp
Sharp Aquos LC-65SE94U User manual
Sharp
Sharp LC-55LE643U_FPTW User manual
Sharp
Sharp LC 32SH20U - 32" LCD TV User manual
Sharp
Sharp Aquos LC-42BX5H User manual
Sharp
Sharp AQUOS LC-26GA5E User manual
Sharp
Sharp 42CG2I Technical manual
Sharp
Sharp Aquos LC-32D44E User manual
Sharp
Sharp AQUOS LC-40LE835U User manual
Sharp
Sharp LC-55LE643U User manual
Sharp
Sharp Aquos LC-60LE660U User manual
Sharp
Sharp LC-37DB5U User manual
Sharp
Sharp AQUOS LC-40LE830U User manual
Sharp
Sharp Aquos LC 32HT3U User manual
Sharp
Sharp LC26SB24U - 26" LCD TV User manual
