Sharp WA-MP55H User manual

TINSEA072SJZZ
05E R YT 1
Quick Start Guide
PORTABLE DIGITAL AUDIO PLAYER
MODEL
WA-MP50H
WA-MP55H
Preparation of
the unit
Windows Media Player
Use Windows Media Player 9
Series or 10 to transfer audio
data from a PC to the unit.
For more details, refer to the
Windows Media Player Users
Guide.
Sample screens, procedures or
operations may vary by the
environment of your PC or
version/settings of Windows
Media Player.
Preparation of audio
data Transferring audio data Playing audio data on the unit
Using with the alkaline battery
Refer to the operation manual for details.
Ripping tracks from audio CD to PC
1LaunchWindows Media
Player.
2On the "Tools" menu, click
"Options..." and then "Copy
Music (Rip Music)", and
select "Copy protect music".
3Click "OK".
4Insert an audio CD into the
PC.
5Click "Copy from CD (Rip)"
on the taskbar to show tracks
on the audio CD.
6Select the check boxes of
tracks to rip.
7Click "Copy Music (Rip
Music)" to start ripping.
1Insert the supplied CD-ROM into your CD-ROM drive.
2Open the "wa-mp100_50" folder on the CD-ROM and
double-click "setup".
3Install the driver following the on-screen instructions.
6
7
5
2
2
6
7
5
ForWindows Media Player 9 Series
ForWindows Media Player 10
If you require any advice or assistance regarding
your Sharp product, please visit our web-site
www.sharp.co.uk/customersupport.
Customers without Internet access may telephone
08705 274277 during office hours (or [phone]
if telephoning from Ireland).
To turn on the unit
Installing a USB driver
To turn off the unit
Press the POWER button.
If you use a PC running Windows 98 Second Edition,
install a USB driver from the supplied CD-ROM.
The installation is not necessary for a PC running
Windows Millennium Edition, Windows 2000 Professional,
Windows XP Professional or Windows XP Home Edition.
In the play or pause mode
1 Press the (POWER) button for 0.5 seconds or more to exit
the mode.
2 Hold down the POWER button for 2 seconds or more.
In the stop, menu or FM mode
Hold down the POWER button for 2 seconds or more.
Do not force the battery
cover open too far.
Insert
the side.
POWER
POWER
Click the "Next" button.
Click the "Next" button.
Click the "Next" button.
Click the "Finish" button.
Click the "Finish" button.
Click the "Yes" button.
Power Off
OPEN
012-001-00:03
File name1
Artist name1
Downloaded from: http://www.usersmanualguide.com/

Maintenance
R
L
HOLD
Release
MIC
POWER
NAVI
ForWindows Media Player 9 Series
ForWindows Media Player 10
1Connect the unit to a PC.
2LaunchWindows Media Player.
3Click "Copy to CD or Device (Sync)" on
the taskbar.
4From the drop-down list of "Items to Copy
(All Music)" window, select a list with
desired audio data.
5Select the check boxes of audio data to
transfer.
6Set the unit as a destination.
7Select a folder (Windows Media Player 9
Series only).
8Click the "Copy (Start Sync)" button to
start transfer.
3
5
6 8
4
3
5
4
8
6
1Slide the USB port lever until it stops to open
the USB port.
2Connect the unit to a PC with the USB cable.
Whilst the unit is connected to the PC, the
message shown appears on the unit.
The buttons on the unit do not work if it is connected to a
PC.Disconnect the PC to operate on the unit.
Cleaning
When the unit becomes dirty
Clean it with a soft cloth.When
the unit is excessively dirty, use
a soft cloth dampened in water
(external surfaces only).
Clean the plugs and the
connecting sockets.
If the plugs or sockets are dirty,
noise may be heard.Cleaning
will prevent noise.
Connecting the unit to a PC
1 Press the POWER button to turn the
power on.
2Playback starts auto-
matically.
Playing transferred audio data
Transferring audio data from PC to the unit
USB
USB cable
FM aerial:
The earphone lead works as an
FM aerial. Keep it as straight as
possible.
1
Press the POWER button to turn the
power on.
2Hold down the menu
button for 0.5 seconds
or more.
3Within 10 seconds,
move the menu button
toward or to
select "FMTUNER", and
press it.
4Move the menu button
toward + or - to select
"Searching".
5Move the menu button
toward or to
tune in to the desired
station.
Listening to the FM radio
FM TUNER
SOUND
Recording
SOUND
RECORD
LINE IN HOLD
Audio cable
Recording with the built-in microphone :
Recording from the external equipment :
Connect the external equipment to the unit.
1Press the POWER button to turn the
power on.
2Hold down the menu
button for 0.5 seconds
or more.
3Within 10 seconds,
move the menu button
toward or to
select "RECORD", and
press it.
4Within 10 seconds,
move the menu button
toward + or - to select
"RECORD MIC (RE-
CORD LINE-IN)", and
press it.
5Begin playback on the
external equipment
(Recording from the ex-
ternal equipment only).
Slide
FS
READY
RECORD
RECORD MIC
RECORD LINE-IN
OPEN
MIC
POWER
NAVI
MIC
MIC
MIC
MIC
POWER
NAVI
012-001-00:03
File name1
Artist name1
Searching
98.80MHz
Stereo
Searching
87.50MHz
Stereo
00:00:01
01:23:45
File name3
Recording...
Remaining recording time
Downloaded from: http://www.usersmanualguide.com/

This file has been downloaded from:
www.UsersManualGuide.com
User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes..
Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide,
manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product,
documentation manual, user maintenance, brochure, user reference, pdf manual
Downloaded from: http://www.usersmanualguide.com/