Sharp XL-HP737E User manual

This Quick Start Guide will help you to correctly install and oper-
ate your system.
If you require any advice or assistance regarding
your Sharp product, please visit our web-site
www.sharp.co.uk/customersupport.
Customers without Internet access may telephone
08705 274277 during office hours (or [phone]
if telephoning from Ireland).
0301
1 Accessories
2 Remote control battery installation
1Remove the battery cover.
2Insert the batteries as shown.
3Replace the cover.
Remote control × 1AM loop aerial × 1
FM aerial × 1
Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).
Batteries are not included.
TINSEA054AWZZ
04A R YT 1
3 System connections
Wall socket
(AC 230 V, 50 Hz)
Left speaker
FM aerial
Black
Red
AM loop aerial
Right speaker
4 Turning on your system
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
1Press the X-BASS/DEMO button to
cancel the demonstration mode.
2Press the ON/STAND-BY button to
turn the power on.
MODEL
XL-HP737E
MICRO COMPONENT SYSTEM
XLHP737E_QG.pm 04.1.27, 3:49 PM1
Downloaded from: http://www.usersmanualguide.com/

Listening to a CD or MP3 disc
1Press the CD button.
2Press the 1 button and within 5 seconds, press the
OPEN/CLOSE button to open the disc tray 1.
3Place the disc on the disc tray 1, label side up.
4Press the OPEN/CLOSE button to close the disc tray 1.
5You can place discs on trays 2 - 5 by following steps 2 - 4.
6Press the / button to start playback.
Listening to the radio
1Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
2Press the TUNING ( or ) button to tune in to the desired
station.
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the “ST” indicator.
●“” will appear when an FM broadcast is in stereo.
FM stereo mode indicator
FM stereo receiving indicator
12 cm (5”) 8 cm (3”)
Listening to a cassette tape
1Press the TAPE button.
2Open the cassette door by pushing the area marked “
PUSH EJECT”.
3Load a cassette into the cassette compart-
ment with side A facing you.
4Press the button to choose one side or
both sides.
5Press the / button to listen to side A, or the button
for side B.
■If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power on
again.
2. If the unit is not restored in the previous operation, un-
plug and plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory
by resetting it.
■Clearing all the memory (reset)
1. Press the ON/STAND-BY button to enter the power stand-
by mode.
2. Whilst pressing down the button and the X-BASS/
DEMO button, press the PRESET button until
“CLEAR AL” appears.
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
■Maintenance
Routine maintenance is required for continued optimum perfor-
mance, refer to the operation manual (page 38).
TINSEA054AWZZ
XLHP737E_QG.pm 04.1.27, 3:49 PM2
Downloaded from: http://www.usersmanualguide.com/

This file has been downloaded from:
www.UsersManualGuide.com
User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes..
Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide,
manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product,
documentation manual, user maintenance, brochure, user reference, pdf manual
Downloaded from: http://www.usersmanualguide.com/