Sharp Aquos LC-24LE150M User manual

Printed in Malaysia
TINS-F906WJZZ
13P05-MA-NP
1 2
LC-24LE150M
LED BACKLIGHT TV
OPERATION MANUAL
Supplied accessories
Remote control unit “AAA” size battery (g2) Operation manual
Stand unit
Stand base Post Screws (g4)
Contents
Page
Supplied accessories...........................1
Dear SHARP customer.........................2
Important Safety Precautions .............2
Trademarks...........................................2
Attaching the stand ..............................3
Antenna connection .............................4
Connecting external devices...............5
Remote control unit .............................6
Part names ............................................ 7
Turning the TV on/off ...........................8
Auto Installation....................................8
Page
Programme Setup ................................8
Selecting a preset AV Mode ................9
Menu operation...................................10
Picture menu.......................................10
Audio menu ......................................... 11
Setup menu.........................................11
Function menu .................................... 12
ECO mode ........................................... 12
Timer.................................................... 12
Appendix .............................................13
Specifications .....................................14
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many
years of trouble-free operation of your product, please read the Important Safety Precautions
carefully before using this product.
Important Safety Precautions
• Cleaning — Unplug the AC cord from the AC outlet before cleaning the product. Use a soft damp cloth to clean the
product. Do not use liquid cleaners, aerosol cleaners or chemical cloth to clean it, as such materials may damage the
product.
• Water and moisture — Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub,
swimming pool and in a wet basement.
• Do not place vases or any other water-filled containers on this product.
The water may spill onto the product causing fire or electric shock.
• Stand — Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall,
resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table
recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the
manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.
• When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and
uneven floor surface can cause the product to fall from the cart.
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents
and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the
product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed
for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation
is provided or the manufacturer’s instructions are followed.
• The LCD panel used in this product is made of glass. Therefore, it can break when the product is struck forcefully or with a
sharp object. If the LCD panel is broken, be careful not to be injured by broken glass.
• Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating
products (including amplifiers).
• To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
• To prevent fire or shock hazard, do not place the AC power cord under the TV set or other heavy items.
• Do not place heavy objects on this product or stand on it. Doing so could cause injury if the product overturns. Take
special care near children and pets.
• The LCD panel is a very high technology product with 1,049,088 pixels, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fixed point of
blue, green or red.
This is within product specifications and does not constitute a fault.
• Precautions when transporting the TV
When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always carry
the TV by two people holding it with two hands — one hand on each side of the TV.
• Do not display a still picture for a long time, as this could cause an afterimage to remain.
• Install the product on the place where the AC cord can be unplugged easily from the AC outlet.
• Do not forcibly or accidentally pull both the power cord and DC cable connected to the AC adaptor. Both cables might get
stretched, broken, loosed or tensed. Such conditions may cause a fire break out or an electric shock.
Trademarks
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
LC-24LE150M_F906_EN.indd 1LC-24LE150M_F906_EN.indd 1 6/11/2013 12:00:27 PM6/11/2013 12:00:27 PM

3 4
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from
being damaged.
1Confirm the screws supplied with the TV.
Screw driver
Screw
Soft cushion
Screws (m 4)
(used in step 1 and 3)
2Insert and hook post into stand base slot holes.
(1)
Fix the post using short screw.
3Insert the stand base to the stand post on the
bottom of the TV. (2)
4Insert and tighten the 3 screws into the 3 holes
on the bottom of the stand base. (3)
NOTE
• To detach the stand, perform the steps in reverse order.
• Do not attach or detach the stand without holding it. Doing
so can cause the stand to fall, resulting in serious personal
injuries as well as damage to the stand.
Antenna connection
Connect antenna cable to the antenna terminal
or
If your outdoor antenna uses a 75-ohm coaxial
cable with a standard DIN45325 plug (IEC
169-2), plug it into the antenna jack at the rear of
the set.
If your outdoor antenna uses a 300-ohm twin-
lead flat feeder, connect a 300-ohm to 75-ohm
impedance converter and plug it into the antenna
jack at the rear of the set.
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH
THE AC CORD CONNECTED.
NOTE
• Place the TV close to the AC outlet, and keep the power plug within reach.
LC-24LE150M_F906_EN.indd 2LC-24LE150M_F906_EN.indd 2 6/11/2013 12:00:27 PM6/11/2013 12:00:27 PM

5 6
Connecting external devices
You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD
player, Digital TV STB (Set Top Box) and PC. To view external source images, select the input source from
INPUT on the remote control unit or INPUT on the TV.
CAUTION
• To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital
TV STB (Set Top Box), PC or other external equipment.
• Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.
Connecting a VCR, game console or camcorder
A VCR, game console, camcorder and some other audiovisual equipment can be conveniently connected
using the INPUT 2 or INPUT 3 terminals.
When using component cable
(commercially available)
When using composite cable
(commercially available)
VCR/Game
console/Camcorder
VCR/Game
console/Camcorder
or
Connecting a DVD player/Digital TV STB (Set Top Box)
You can use the INPUT 1 (HDMI) or INPUT 2 terminals when connecting to a DVD player/Digital TV STB (Set
Top Box) and other audiovisual equipment.
When using HDMI-certified cable
(commercially available)
When using component cable
(commercially available)
DVD player/
Digital TV STB
(Set Top Box)
DVD player/Digital TV
STB (Set Top Box)
Connecting a PC
You can use the INPUT 1 (HDMI) terminal when
connecting to a PC.
PC
Remote control unit
SURROUND TIMER
WIDE
LCDTV
GB095WJSA
1
2
5
7
8
9
10
6
3
4
11
12
13
14
16
15
17
7 VOLk/VOLl
Set the volume.
(VOLk) Increase the volume.
(VOLl) Decrease the volume.
8 e(Mute)
Press
esMutes sound.
Press
eagain sRestores sound.
Mute will be cancelled after 30 minutes. However, the TV
will not suddenly output loud sound as the volume level will
be set to 0 automatically. Increase the volume level by
pressing VOL k.
9 a/b/c/d(Cursor)
Select a desired item on the setting screen.
ENTER
Execute a command.
10 WIDE
Change the wide image mode. (See page 12.)
11 ECO
Reduce overall power consumption based on user
preferences. (See page 12.)
12 TIMER
Set the Sleep timer and Reminder. (See page 12.)
13 INPUT (INPUT SOURCE)
Select an input source.
14 CHr/CHs
TV input mode: Select the channel.
(CHr) Increase the channel number.
(CHs) Decrease the channel number.
15 MPX
Select the sound multiplex mode.
16 MENU
Display the menu screen.
17 RETURN
MENU mode: Return to the previous menu screen.
1 POWER (STANDBY/ON)
To switch the power on and off. (See page 8.)
2 DISPLAY
Display the channel or input information.
3 SURROUND
Select surround setting. (See page 11.)
4 0 – 9
Set the channel.
5 A(Flashback)
Press
Ato return to the previous selected channel
or external input mode.
6 AV MODE
Select an audio and video setting. (See page 9.)
Inserting the batteries
Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become
depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.
1Open the battery cover. 2Insert the two supplied “AAA” size
batteries.
3Close the battery cover.
• Place batteries with their terminals corresponding to
the (e) and (f) indications in the battery compartment.
CAUTION
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
LC-24LE150M_F906_EN.indd 3LC-24LE150M_F906_EN.indd 3 6/11/2013 12:00:28 PM6/11/2013 12:00:28 PM

7 8
Part names
TV (Front)
POWER indicator
Light off Power off.
Lighted (Red) The TV is in standby mode.
Lighted (Green) The TV is on.
Remote control sensor
TV (Rear)
SERVICE ONLY
SERVICE
ONLY
12
9
1
2
3
4
5
7
6
10
11
8
1POWER (On/Off) button
2MENU button
3INPUT button
4Channel up (r)/down (s) buttons
5Volume up (e)/down (f) buttons
6 SERVICE ONLY terminal*
7INPUT 1 (HDMI) terminal
8SERVICE ONLY terminal*
9 INPUT 3 terminals
10 /AUDIO output (R/L) terminal
11 Antenna input terminal
12 INPUT 2 (COMPONENT/AV INPUT)
terminals
* Usually do not connect anything to this terminal as it is reserved only for service personnel.
• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.
Turning the TV on/off
Turning on/off the power
• To turn on the power
Press POWER on the TV or remote control. (After a few
seconds, an image appears with sound.)
• To turn off the power
Switch it off by pressing POWER on the TV or remote
control.
NOTE
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the unit is in standby
mode.
Auto Installation
1When you turn on the TV for the first time, Setup
menu will appears and Language automatically
been selected.
2Press c/dto select desired language.
Programme Setup
Channels can be tuned automatically or manually.
Auto tuning
You can automatically tune by performing the
procedure below.
1Press MENU and the MENU screen displays.
2Press c/dto select “Setup”.
3Press a/bto select “Auto tuning”, and then
press ENTER.
4Press ENTER to select Start scan. The search
will begin for all available stations.
5When the search is completed, the TV will
automatically appear the first programme
position.
Manual tuning
You can tune channels into desired channels.
1Repeat steps 1 to 2 in Auto tuning.
2Press a/bto select “Manual tuning”, and then
press ENTER.
HCH (Channel)
Display channel that you selected.
HColour system
Select the optimum colour system to receive. (Auto,
PAL, SECAM, NTSC 3.58, NTSC 4.43)
HSound system (Broadcasting system)
Select the optimum sound system (Broadcasting
system) to receive. (B/G, I, D/K, M)
HSearch
The next channel will be searched in order.
HFine-tune
You can adjust the frequency to your desired position.
NOTE
• Adjust while checking the background picture as a
reference.
• Instead of pressing a/bto adjust the frequency, you
can set by directly entering the frequency number of the
channel with 0 — 9.
a
• 179.25 MHz: Press 1 s7 s9 s2 s5.
• 49.25 MHz: Press 4 s9 s2 s5 sENTER.
LC-24LE150M_F906_EN.indd 4LC-24LE150M_F906_EN.indd 4 6/11/2013 12:00:33 PM6/11/2013 12:00:33 PM

9 10
Menu operation
1Press MENU and the MENU screen displays.
AV mo d e
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
Colour temp.
Standard
High
Enter
+ 8
30
0
+ 8
0
+ 2
cdb
2Press c/dto select the desired menu. (Picture,
Audio, Setup, Function)
3Press a/bto select the desired menu item.
Press ENTER to proceed if necessary.
4Press a/bor c/dto select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
Programme Setup (Continued)
Programme edit
1Repeat steps 1 to 2 in Auto tuning.
2Press a/bto select “Programme edit”, and
then press ENTER.
3Press a/bto select which channel to edit.
4Press ENTER again to edit below items.
HCH (Channel)
Display channel number.
HLabel
To enter the name of the channel. Maximum 7
alphanumeric can be input.
• Press a/b: To select a desired alphanumeric.
• Press c/d: To move to the desired alphanumeric
position.
• To exit, press ENTER.
• If the wrong alphanumeric is entered, select [ ] to clear.
HSkip
Channels with “Skip” set to “X” are passed over
when using CHr/seven if selected while
watching the image from the TV.
HSort
Channel position can be sorted freely.
Input setting
HColour system (AV input mode only)
You can change the colour system to one that is
compatible with the image on the screen. (Auto,
PAL, SECAM, NTSC 3.58, NTSC 4.43)
NOTE
• If “Auto” is selected, colour system is automatically set.
If an image does not display clearly, select another colour
system (e.g. PAL, NTSC 4.43).
• “Colour system” is selectable only when inputting a
composite signal.
HLabel
To enter the name of the channel. Maximum 7
alphanumeric can be input.
• Press a/b: To select a desired alphanumeric.
• Press c/d: To move to the desired alphanumeric
position.
• To exit, press ENTER.
• If the wrong alphanumeric is entered, select [ ] to clear.
Picture menu
AV mo d e
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
Colour temp.
Standard
High
Enter
+ 8
30
0
+ 8
0
+ 2
cdb
HPicture adjustments
Selected item c button d button
Backlight The screen dims The screen
brightens
Contrast For less contrast For more contrast
Brightness For less brightness For more
brightness
Colour For less colour
intensity
For more colour
intensity
Tint Skin tones become
reddish
Skin tones become
greenish
Sharpness For less sharpness For more
sharpness
HColour temp. (Colour temperature)
Adjusts the colour temperature to give the best white
image.
Selected item Description
High White with bluish tone
Middle
Low White with reddish tone
HDNR (Digital Noise Reduction)
Reduces noise on screen and produces a clearer
video image. (Off, Low, Middle, High)
NOTE
• For resetting all Picture adjustment items to factory preset
values, press a/bto select “Reset”, press ENTER, press
a/bto select “Yes”, and then press ENTER.
Selecting a preset AV Mode
“AV mode” gives you several viewing options to
choose from to best match the system environment,
which can vary due to factors like room-brightness,
type of programme watched or the type of image
input from external equipment.
1Press AV MODE.
2Each time you press AV MODE, the mode
changes.
• You can also switch the mode in the “AV mode”
menu on the “Picture” menu screen.
Selected item Description
Standard For a highly defined image in a normally
bright room.
Movie For a movie.
Dynamic For a clear-cut image emphasising high
contrast for sports viewing.
Dynamic
(fixed)
Changes the image and sound settings to
the factory preset values. No adjustments
are allowed.
PC For PC. (Available only when receiving a
PC signal via INPUT 1 (HDMI) terminal.)
NOTE
• You can select a different AV mode item for each input
mode. (For example, select Standard for TV input and
Dynamic for VIDEO input.)
LC-24LE150M_F906_EN.indd 5LC-24LE150M_F906_EN.indd 5 6/11/2013 12:00:33 PM6/11/2013 12:00:33 PM

11 12
Audio menu
AV mode
MPX
Billingual
Bass
Treble
Balance
Surround
Reset
Standard
Auto
DUAL I
Off
Enter
c
c
0
0
0
c
d
d
d
HMPX
Selected item Description
Auto The TV automatically select the best
sound.
MONO Only MONO sound.
HBillingual
Select the preference audio language (DUAL I,
DUAL II,DUAL I+II)
HAudio adjustments
Selected item c button d button
Bass For weaker bass For stronger bass
Treble For weaker treble For stronger treble
Balance Decrease audio
from the right
speaker
Decrease audio
from the left
speaker
HSurround
When you set to “On”, you can enjoy surround
sound, the same as if you were in a movie theatre.
(On, Off)
NOTE
• Billingual only can be select when MPX set to “Auto”.
• For resetting all Audio adjustment items to the factory
preset values, press a/bto select “Reset”, press
ENTER, press a/bto select “Yes”, and then press
ENTER.
Setup menu
Language
Auto tuning
Manual tuning
Programme edit
Input setting
Input select
HDMI auto view
Identification
English
Component
Disable
Enter
c
c
c
d
d
d
db
HLanguage
Select from among 10 languages: English, Simplified
Chinese, Arabic, French, Portuguese, Russian,
Persian, Thai, Vietnamese and Indonesian.
HInput select
For setting the signal type of external equipment.
Input source Selectable item
INPUT2 Component, Video
HHDMI auto view (HDMI input mode only)
Selected item Description
Enable/
Disable
Set whether or not to use the Auto
Selection of WIDE MODE based on signal
recognition received from the HDMI
signal.
HIdentification
You can check the current version of the software on
the screen.
HSoftware update
Allows you to update to the latest software.
HReset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
NOTE
• If you execute “Reset”, all the settings such as Picture and
Audio will be reset to the factory preset values.
Function menu
Key lock
Wide mode
Audio output select
Auto volume
No operation off
No signal off
Demo
Off
Full
Headphone
Off
Disable
Disable
Off
Enter
c
c
c
c
c
c
c
d
d
d
d
d
d
d
HKey lock
You can block your child to press any key on the TV
set.
HWide mode
You can select different picture sizes that account for
the kind of each pictures manually.
Selected item Description
Full For 16:9 squeeze pictures.
4:3 For 4:3 “standard” pictures. A side bar
appears on each side.
Panorama In this mode the picture is progressively
stretched toward each side of the screen.
NOTE
• Some picture sizes may not be displayable depending on
the input signal.
HAudio output select
You can select which device is used for outputting
audio.
Option Description
Headphone Output audio through headphones.
Audio out Output audio through an A/V receiver or
surround audio controller.
NOTE
• If you select “Headphone” when a cable is inserted in the
AUDIO output terminal, the TV speakers are muted and all
Audio menu items cannot be adjusted.
• If you select “Audio out”, sound via the AUDIO output
terminal is not adjustable and constantly outputs.
Regarding the headphone jack
• Use headphones with a stereo mini plug ( 3.5 mm).
• Be sure to unplug headphones from the jack when they
are not in use.
Volume display when headphones are plugged in
30
CAUTION
• AUDIO output terminal is also used for headphones.
Reduce the volume before using headphones.
Overwhelming sound may damage your hearing.
HAuto volume
Different sound sources, fairly often do not have the
same volume level, for example the changing from
movie to the advertisements. Auto volume solves this
problem and equalises the volume levels. (On, Off)
HNo operation off
You can set the TV to automatically power off when
no TV operation is performed for more than 3 hours.
(30 min., 3 hours, Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
HNo signal off
You can set the TV to automatically power off in
about 15 minutes after the TV goes into a state of
receiving no programme signals. (Enable, Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
NOTE
• When a TV programme finishes, and the TV receives signal
input, this function may not operate.
HDemo
When “Demo” is set to “On”, after all the settings are
completed, the Demo screen is displayed if there is
no operation for several minutes. (On, Off)
ECO mode
This function enables you to reduce the backlight
brightness in order to decrease the power
consumption and increase the backlight life span as
shown in the following table.
Selected item Description
ECO IReduces the backlight brightness.
ECO II Reduces the backlight brightness more
than “ECO I”.
ECO off Normal setting of backlight brightness.
ECO status will be displayed on the channel
information window.
Timer
Press TIMER to set the Sleep timer or Reminder for
an activity.
HSleep timer
This function is conveniently used when, for instance,
going to bed while watching TV.
(Off, 0 hr. 30 min., ......, 2 hr. 30 min.)
H(Reminder)
This function is to set a reminder for an activity.
Press a/bor ENTER to set.
NOTE
• If you turn off the TV, the counter will be reset.
LC-24LE150M_F906_EN.indd 6LC-24LE150M_F906_EN.indd 6 6/11/2013 12:00:33 PM6/11/2013 12:00:33 PM

13 14
Specifications
Item Model LC-24LE150M
LCD panel 23.5o(598 mm) TFT LCD
Resolution 1,049,088 pixels (1366 g768)
Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.43
TV
Function
TV-Standard PAL: B/G, D/K, I SECAM: B/G, D/K, K/K1NTSC: M
Receiving
Channel
VHF/UHF 43.25—863.25 MHz
CATV S1—S41ch (including Hyperband)
TV-Tuning System Auto Preset 99 ch
STEREO/BILINGUAL NICAM: B/G, I, D/K A2 stereo: B/G
Viewing angles H : 176º V : 176º
Audio amplifier/Speakers 5 Wg2 / 3 g8 cm 2pcs
Terminals Antenna input UHF/VHF 75 qDIN type
INPUT 1 HDMI (HDMI input), PC input
INPUT 2 VIDEO in, AUDIO in, COMPONENT in
INPUT 3 VIDEO in, AUDIO in
OUTPUT AUDIO out, Headphone ( 3.5 mm stereo)
OSD language English/Simplified Chinese/Arabic/French/Portuguese/Russian/Persian/Thai/
Vietnamese/Indonesian
Power Requirement AC 110—240 V, 50/60 Hz
Power Consumption 36 W (0.8 W Stand by)
Dimensions without stand 561 (W) g358 (H) g50 (D) mm
with stand 561 (W) g423 (H) g178 (D) mm
Weight 4.5 kg (without stand) / 5.0 kg (with stand)
Operating Temperature 0°C — 40°C
• As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
Optional accessory Part name Model number
Wall mount bracket AN-130AG1
Some of the listed optional accessories may not be available
depending on the region.
Please check with your nearest Sharp Authorised Dealer for
current optional accessories as we may add more optional
accessories from time to time.
Appendix
Troubleshooting
The problems described below are not always caused by malfunctions. Check the TV again before having the
TV serviced.
Problem Possible Solution
• No power. • Check if you pressed POWER on the remote control unit. (See page 8.)
If the indicator on the TV lights up red, press POWER.
• Is the AC cord disconnected?
• Has the power been turned on? (See page 8.)
• Unit cannot be operated. • External influences such as lightning, static electricity, etc., may cause improper
operation. In this case, operate the unit after first turning the power off the TV or
unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
• Remote control unit does not
operate.
• Are batteries inserted with polarity (e, f) aligned? (See page 6.)
• Are batteries worn out? (Replace with new batteries.)
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light shining on the remote control sensor?
• Picture is cut off. • Are screen mode adjustments such as picture size made correctly? (See page 12.)
• Strange colour, light colour, or
dark, or colour misalignment.
• Adjust the picture tone. (See page 10.)
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the colour system setting. (See pages 8, 9.)
• Check the “HDMI Auto View” setting. (See page 11.)
• Power is suddenly turned off. • The unit’s internal temperature has increased.
Remove any objects blocking the vent or clean.
• Check the “ECO” setting. (See page 12.)
• Is the sleep timer set? (See page 12.)
• No picture. • Is the connection to external equipment correct? (See page 5.)
• Is the picture adjustments correct? (See page 10.)
• Is the antenna connected properly? (See page 4.)
• No sound. • Is the volume too low? (See page 6.)
• The TV sometimes makes a
cracking sound.
• This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to changes in temperature. This does not affect the TV’s
performance.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly
delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near
a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature:
f20°C to e60°C.
LC-24LE150M_F906_EN.indd 7LC-24LE150M_F906_EN.indd 7 6/11/2013 12:00:34 PM6/11/2013 12:00:34 PM

Memo
LC-24LE150M_F906_EN.indd 8LC-24LE150M_F906_EN.indd 8 6/11/2013 12:00:34 PM6/11/2013 12:00:34 PM