
- 3 -
ALARM AND SNOOZE FUNCTION
Press [MODE] to enter alarm setting mode.
1. Under alarm setting mode, press [SET] to set the alarm, with the sequence as follows: [Hour]
[Minute] [Snoozing] [Music] [Exit].
2. Under alarm setting mode, press the [MODE] button to return the normal time display. (If you
do not press anything for 1 minute, you will automatically return to normal time display.)
3. Under the alarm setting mode, press the [UP] or [DOWN] button to turn alarm and snoozing ON
or OFF. When the alarm is on, the symbol is displayed. When the snooze is on, the symbol is
symbols are displayed.
4. To silence the alarm, press any button, except [SET], to stop it for about 2 minutes. After this
period, the alarm will ring again automatically, and the snooze function will repeat 2 times (for 2
minutes each time). Press the [SET] button to cancel the alarm.
5. The interval of snooze time is 1 to 60 minutes.
6. After you set the Alarm and Snooze features, you can select your preferred alarm sound from
the “MUSIC” menu.
TEMPERATURE MODE
• This mode displays the current room temperature.
• Press [DOWN] to display the temperature in °F or °C.
NATURE SOUNDS
Press [SOUND] to turn on the nature sound with the sequence as follows:
1. Running water and animals
2. Forrest
3. Running water with bird songs
4. Insect sounds
5. Running water
6. Repeating cycle of sounds 1-5
BACKLIGHT
• Press [SOUND] to turn on the nature sound and backlight. Press again to pause the nature
sound, and backlight keeps up for 5 seconds
• Press any other button, it will light up for 5 seconds and then turn off.
WARRANTY / CUSTOMER SERVICE
Sharper Image branded items purchased from SharperImage.com include a 1-year limited
replacement warranty. If you have any questions not covered in this guide, please call our Customer
Service department at 1 (877) 210-3449. Customer Service agents are available Monday through
Friday, 9:00 a.m. to 6:00 p.m. ET.
The SHARPER IMAGE® name and logo are registered trademarks.
©Sharper Image. All Rights Reserved.