Sharper Image SBS1-SI User manual

SOFT BLADE USB FAN
OWNER’S GUIDE
MODELS
SBM1-SI, SBS1-SI, SBV1-SI

3
English
Important Safety Instructions.....................................................................................................................................4
How to Use....................................................................................................................................................................................8
Cleaning & Storage..............................................................................................................................................................9
Troubleshooting ..................................................................................................................................................................10
Warranty.....................................................................................................................................................................................11
CONTENTS

4English
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
This owner’s guide and any additional inserts are considered part of the
product. They contain important information about safety, use and disposal.
Before using the product, please familiarize yourself with all operating and
safety instructions. Please keep all documents for future reference and pass
these documents on, together with the product, to any future owner. See
sihomecomfort.com to view, download and print the most current version of
these instructions.
INTENDED USE: This product is intended to circulate the air in indoor living
spaces only in the United States and Canada. This product is not intended for
commercial or industrial use. The manufacturer assumes no responsibility
for damage or injury due to unauthorized use or product modification.
Failure to follow these directions will void the product warranty.
WARNING: Risk to Children and Impaired Persons
- Supervision is required during the installation, operation, cleaning and
maintenance of this product by children under age 12 and anyone with
reduced physical, sensory or mental capabilities. Children should be
supervised to ensure that they do not play with the appliance, its parts and
packaging material.
INSTALLATION WARNING—To reduce risk of fire, electrical shock and injury to
persons, observe the following:
- Place this product away from curtains, draperies, tablecloths and other
fabrics, since they may be drawn into the fan, damage the motor and/or
cause a fire.
- No part of this product (the appliance, power cord, plug, packaging,
etc.) should be placed near furnaces, fireplaces, stoves or other high

5
English
temperature heat sources. Do not use this product in a window, on an
uneven or unstable surface, or near water.
- The appliance, power supply, power cord and plug cannot come into
contact with water. Do not use this product on wet surfaces. Do not use this
product in a bathtub or shower or position product where it may fall into a
bathtub, laundry, swimming pool or other water container. Do not use this
product outdoors or expose it weather or elements.
- Do not run cord under carpeting. Do not cover cord with throw rugs,
runners, or similar coverings. Do not route cord under furniture or
appliances. Arrange cord away from traffic area and where it will not
be tripped over. The cord should not hang over edges of counters or
be placed where it can be crimped or closed in doors. Place appliance
near an easily accessible outlet so the product can be unplugged quickly
during an emergency.
SAFE USE WARNING—To reduce risk of fire, electrical shock and injury to
persons, observe the following:
- WARNING: To reduce likelihood of circuit overload, fire and electric shock,
do not operate with a solid state speed device, such as a dimmer control
switch.
- Do not operate any fan with a damaged cord or plug. Discard fan or
return to an authorized service facility for examination and/or repair. Do
not operate unit if it has been dropped or is damage is apparent to any
part of the unit. To avoid risk of electrical shock, do not attempt to repair
or replace parts. Only original replacement parts may be used. Contact
(833.800.8669) or ([e-mail]) for further instructions
about replacement and repair.
- Risk of fire. Your appliance is equipped with a detachable power supply.
Use only the power cord and plug provided.
- Before plugging the AC adapter into an electrical outlet, be sure that all
electrical information on the AC adapter rating label, including voltage, is
compatible with your outlet’s power supply.

6English
- Never use the cord as a handle or otherwise yank, strain or stretch the
power cord.
- While the product is plugged in, do not insert or allow foreign objects to
enter any input or output opening as this may cause risk of electric shock
or fire, or damage the product.
- A loose fit between wall outlet (receptacle) and plug may cause
overheating and distortion of the plug. Discontinue use of the product in
this outlet. Contact a qualified electrician to replace loose or worn outlets.
- Before moving, repositioning, servicing, cleaning and when not in use, use
the product controls to turn off the power and then unplug. To disconnect
the AC adapter from outlet, grasp and pull only the plug. Also, power off
and unplug if the product will be left unattended for an extended period of
time or during electrical storms.
SERVICING WARNING—To reduce risk of fire, electrical shock and injury to
persons, observe the following:
- Clean your product regularly, only as is instructed in this manual. Prior
to cleaning, turn off the power on your product and unplug. Do not use
gasoline, thinners, solvents, ammonias or other chemicals for cleaning.
Refer to the CLEANING instructions provided.
- Do not open appliance housing while product is plugged in. To avoid
risk of shock, all service and/or repairs must be done by an Authorized
Service Center.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: this device may not cause harmful
interference, and this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference

7
English
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Contact Vornado Customer Service or dealer or an experienced radio/TV
technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
DISPOSAL WARNING
To reduce waste and environmental harm, observe the following:
PACKAGE RECYCLING: The packaging protects the appliance from
transport damage. The packaging materials are selected from
the point of view of their environmental friendliness and disposal
technology and are therefor recyclable. Dispose of all packaging
materials in an environmentally responsible manner.

8English
Connect to power in two ways:
OR
HOW TO USE
Insert the USB plug of DC
cord into the USB connector
of your computer.
Insert the USB plug of DC
cord into the AC adaptor
provided and then plug AC
adaptor into a power outlet.
POWER ON / OFF
1. Touch ( ) to power unit on.
2. There are two speeds: HIGH and LOW.
Touch ( ) to select desired speed.
3. Touch ( ) to cycle through speeds and turn unit off.

9
English
1. Power off and unplug the unit prior to cleaning.
2. Dust or wipe the fan with a damp cloth.
3. Use the brush attachment on your household vacuum cleaner to vacuum any
accumulated dust.
Your fan will need regular cleaning. The fan has no user serviceable parts inside
and cannot be opened for cleaning. Never clean the product in any manner
other than instructed in this owner's guide.
CLEANING & STORAGE
Note: The motor is permanently
lubricated and requires no oiling.
During the off-season or after extended periods of non-use, you may choose to
store your fan. To ensure long life of the product, it is recommended to store your
fan by following these instructions:
1. Unplug AC adapter and bundle cord loosely.
2. Cover, or place back in retail carton if available. This prevents fan from
accumulating dust over time.
3. Store fan in cool and dry location.

10 English
POSSIBLE CAUSE AND SOLUTIONPROBLEM
Unit is not plugged in. Plug Power Cord into USB outlet or AC
adapter.
If using the AC adapter, check that it is plugged into an AC
outlet.
Ensure unit fan speed setting is selected.
Unit is damaged or in need of repair. Cease usage and
unplug. Contact Consumer Service for assistance.
The outlet is worn or damaged. Try another outlet for AC
adapter or contact a qualified electrician.
Unit set to a low speed setting. Adjust to a higher
speed setting.
Airflow is blocked. Remove obstruction.
Adjust direction of airflow towards the user.
Under certain conditions, it is possible for a reset GFCI
(Ground Fault Circuit Interrupter) outlet to trip when the user
is changing speeds on a fan. In this event, change to an outlet
that is not connected to a GFCI device. It could also indicate a
weak or defective GFCI outlet. Contact a qualified electrician
to check the GFCI outlet.
The unit fails to
power on.
Airflow is weak
or slow.
GFCI has tripped.
TROUBLESHOOTING