Sharper Image 204864 User manual

Item No. 204864
SLEEP THERAPY MASK
Owner’s Manual
Thank you for purchasing the Sharper Image Sleep Therapy Mask.
Please read this guide carefully and keep for future reference.
STEP 1
• Adjust the fit of your Sleep Therapy Mask to your
head with the Mask Strap Adjustments. When
it fits correctly, your Sleep Therapy Mask will be
comfortable to wear, but fit snug enough to block
out external light.
• Remove the Light Control Cover.
• Pull the “Pull to remove before use” plastic strip
from underneath the CR-2032-coin cell battery.
NOTE: When replacing the CR-2032 battery, make
sure the positive (+) side of the battery faces up.
STEP 2
• Press and hold down the Light Control On/Off/
Brightness Selection Button until you reach your
desired Points of Glo brightness. This will be the
brightness level that your Sleep Therapy Mask to
Sleep will start at every time you use it.
• The Points of Glo can be set to gradually dim over
10, 20 or 30 minutes. To select your dim period, slide
the Timer Selection to the 10, 20 or 30 position.
STEP 3
• Replace the Light Control Cover.
- 1 -
HOW TO USE YOUR GLO TO SLEEP THERAPY MASK
STEP 4
• Settle into a comfortable sleeping position, adjusting
your device position as necessary so you can see the
four (4) Points of Glo and no external light.
• Adjust straps to keep the mask even and comfortable
on face.
• Align the device to see four Points of Glo.
• Lie back and relax.
STEP 5
• Look up at the Points of Glo (the highest Points of Glo
that you can). Use a relaxed gaze, you may blink.
• Points 3 and 4 are the most effective points. NOTE: The
Points of Glo do not emit enough light to slow the release
of melatonin, so the light will not keep you awake in any
way.
STEP 6
• Take long, abdominal breaths. Let everything else relax
while you inhale all the way and your lungs fill with air
as your belly extends outward. Then exhale slowly and
squeeze everything out of your lungs.
Wait a few seconds and repeat this cycle.
Breathe IN - 1... 2... 3... 4...
Breathe OUT - 1... 2... 3... 4...
• Keep your eyes open, looking up at a Point of Glo.

- 2 -
The Sharper Image® name and logo are registered trademarks. Manufactured and marketed
by Camelot SI, LLC under license. ©Sharper Image All Rights Reserved.
CUSTOMER SERVICE
Customer Service
Sharper Image branded items purchased from SharperImage.com
include a 1-year limited replacement warranty. If you require any
assistance with your Sleep Therapy Mask, please call
1 [phone].
TECHNICAL SPECIFICATIONS
Foam: Hypoallergenic foam
Points of Glo: LED lights
Cleaning Instructions: To clean, gently wipe with a soft cloth
moistened with warm water or mild detergents, and then
remove all moisture with a soft, dry cloth. Do not use harsh
solvents or chemicals for cleaning.
STEP 1
• Adjust the fit of your Sleep Therapy Mask to your
head with the Mask Strap Adjustments.
• Remove the Light Control Cover.
STEP 2
• Press and hold down the Light Control On/Off/
Brightness Selection Button until you reach your
desired Points of Glo brightness.
•To select your dim period, slide the Timer Selection
to the 10, 20 or 30 position.
STEP 3
• Put the Light Control Cover back on.
• Press the Light Control On/Off Brightness Selection
Button. The Points of Glo will illuminate to your
desired starting brightness.
STEP 4
• Align the device to see four Points of Glo.
• Lie back and relax.
STEP 5
• Look up at the Points of Glo (the highest Points of
Glo that you can).
QUICK START GUIDE
STEP BY STEP HOW TO USE THE SLEEP THERAPY MASK
STEP 6
• Take long, abdominal breaths. Then exhale slowly. Wait a
few seconds and repeat this cycle:
Breathe IN - 1... 2... 3... 4...
Breathe OUT - 1... 2... 3... 4...
• Keep your eyes open, looking up at a Point of Glo.