Sharper Image 203808 User manual

- 1 -
Item No. 203808
ULTRASONIC EYEGLASS CLEANER
User Guide
Thank you for purchasing the Ultrasonic Eyeglass Cleaner. Please take a moment to read this
guide and store it for future reference.
INTRODUCTION
The Ultrasonic Eyeglass Cleaner removes built-up dirt, grime, make-up and oil to make your
glasses, readers or sunglasses clean as new in just a few minutes, without heat or harsh
chemicals. Just add water and press a button.
DESCRIPTION OF PARTS
A. Body
B. Cleaning Tank
C. Lid
D. Power/Timer Button
E. Power Cord
F. LED Timer Display
G. Basket
H. Watch Shelf
IMPORTANT: Never turn this device on when the tank is empty. Always place items in the basket
before immersing in the tank. Cleaning items without the basket could damage the device.
OPERATING INSTRUCTIONS
1. Open the lid of the device and place glasses into the cleaning basket. Place the basket into
the tank.
2. Fill the tank with tap water. NOTE: Water should cover the glasses but not exceed the MAX
mark. Running without water can damage the unit.
3. Close the lid.
4. Plug the unit into an AC outlet. The LED timer will begin to flash.
5. Press the TIMER button to choose a cleaning session (90/180/280/380/480 seconds).
6. Press the POWER button to start cleaning. When the timer reaches 0, the device will stop
cleaning.
7. You may repeat the process if necessary. However, we recommend waiting at least 5
minutes between cleaning cycles.
8. After cleaning, turn the device OFF and unplug it from the outlet. Remove your cleaned
glasses from the tank.

- 2 -
CLEANING METHODS
The Ultrasonic Eyeglass Cleaner can be used for a variety of cleaning needs, with these 3
methods:
1. General Cleaning - Use plain tap water for a brisk cleaning.
2. Enhanced Cleaning – Add a few drops of mild soap or dish soap to help remove grease,
makeup and oil.
3. Partial Cleaning – To clean parts of large items, the device can be used with the lid open.
CLEANING WATCHBANDS
Use the included watch shelf for cleaning metal watchbands. First, place the watch shelf into
the basket. Place the watch on the watch shelf, with the case (housing) facing up. Lower the
shelf into the container which is filled with water. Select a timer duration and press power. Allow
the watch band to dry fully after cleaning.
NOTE: To prevent damaging the watch, do not submerge the case (housing) in water.
CLEANING JEWELRY
This device can be used to clean metal jewelry, including necklaces, rings, earrings, bracelets
and more.
Place jewelry to be cleaned into the basket. Lower the basket into the tank, which is filled
with water. Add a drop of mild dish soap to help remove grease, oil or makeup. Select a timer
duration and press power. Dry your jewelry with a soft, dry cloth.
IMPORTANT: Ultrasonic cleaning is considered safe for gold, silver, platinum, diamonds, rubies,
sapphires, amethyst and citrine (yellow quartz) pieces. It is NOT suitable for soft, water porous
stones, such as pearls, opals, turquoise, amber and ivory. Do not use this device with antique
jewelry, enamel jewelry, paste jewelry, costume jewelry or any jewelry containing stones that
have been set with glue. Consult a jewelry expert before cleaning any jewelry with an ultrasonic
device.
OTHER USES
• Metal items (coins, medals, badges, valves, eating utensils, etc.)
• Writing materials (pen nibs, ballpoint pen sleeves, printer nozzles, signature stamps, etc.)
• Personal hygiene items (toothbrushes, false teeth, razor blades, etc.)
NOTE: The following items are NOT suitable for ultrasonic cleaning: wood, real pearls, leather
goods, clock/watch mechanisms.

- 3 -
MAITENANCE
1. Do not clean this device with harsh cleaning products or sharp objects.
2. Clean the tank with a soft cloth and wipe dry.
3. To prevent the formation of lime scale, do not leave water in the tank after use.
4. Store this device in a cool, dry place.
5. Keep this device out of reach of children at all times.
6. Do not submerge this device in water or any other liquid.
IMPORTANT SAFEGUARDS
When using electrical products, especially when children are present, basic safety precautions
should always be followed, including the following:
DANGER - To reduce the risk of electrocution:
1. Always unplug this product immediately after using.
2. Do not use while bathing.
3. Do not place or store product where it can fall or be pulled into a tub or sink.
4. Do not place in or drop into water or other liquid.
5. Do not reach for a product that has fallen into water. Unplug immediately.
WARNING - To reduce the risk of burns, electrocution, fire or injury to persons:
1. This product should never be left unattended when plugged in.
2. Close supervision is necessary when this product is used by, on, or near children or invalids.
3. Use this product only for its intended use as described in this manual. Do not use
attachments not recommended by the manufacturer.
4. Never operate this product if it has a damaged cord or plug.
5. Always unplug this product immediately after using.
SPECIFICATIONS
Built-in Timer: 90/180/280/380/480 seconds
Tank Volume: 600 ml
Power Consumption: 35W
Power Supply: 120V~60Hz
The SHARPER IMAGE® name and logo are registered trademarks.
©Sharper Image. All Rights Reserved.