ShenZhen BigTree Technology BIQU-B1 User manual

Cover

Packing List
Wrench and
screw bag （1set）
Diagonal pliers
（1pcs）
BIQU-B1
（1pcs）
TF card and card
reader （1set）
UM2 nozzle
（2pcs）
power cable
（1pcs）
Rack
（1pcs）
BLtouch stand
（1pcs）
Data cable
（1pcs）
Filament for test
（45g）
Cable tie
（5pcs）

基本参数
Printer Name
BIQU-B1
Printing Size
235 x 235 x 270mm
Molding Tech
FDM
Nozzle Quantity
1 PCS
Layer Thickness
0.1mm - 0.3mm
Nozzle Diameter
Standard 0.4mm
Printing
Accuracy
±0.05mm
Filament
PLA
Slicing Format
STL / OB J/ AMF
Connecting
Method
Via Wifi / TF card / USB
Slicing
Compatible
With Cura / Repetier-Host / Simplify
3D
Rated Voltage
100 - 120V / 200 - 240V 50 / 60
HZ
Output Voltage
24V
Rated Power
270W
Max Temp of Hot
Bed
100℃
Max Temp of
Nozzle
260℃

OS compatible
with Win 7 / Win 10
Max Printing
Speed
100mm/s
Normal Printing
Speed
60mm/s
Language
Transform
Supported
Power-loss
Recovery
Yes
Filament-jam
Detection
Yes
Shenzhen Bigtree Technology Co.,Ltb
二维码

User Manual
Address：Floor 2, Building B, No.9, East Area, Shangxue Technology Park,
Bantian St.,Longgang Dist. Shenzhen City, Guang dong Province.
Telephone：[phone] [phone]
E-mail：[email protected]
Web: www.BIQU.equipment

Step 1
Connecting the terminal wire to the socket of the hot bed.
Step 2
There are two M5 threaded holes on the end of the 2040 aluminum
profile,which is used for mounting the M5×16 hex socket head screws.

1.2040 aluminum profile—length 456mm (1pcs)
2. M5×16 hexagon round-head screws (2pcs)
3. M5×10 hexagon round-head screws (2pcs)
4. M4×8 hexagon round-head screws (4pcs)

Step 3
There is a M4 threaded holes on the other 2040 aluminum profile.
When installation, make the threaded hole face the metal sheet part.
1. 2040 aluminum profile--length 45mm (1pcs)
2. M5×16 hexagon round-head screws (2pcs)
3. M5×10 hexagon round-head screws (2pcs)
4. M4×8 hexagon socket round head screws (4pcs)

Step 4
Connecting the terminal wire on side to the motor’s port.
Step 5
1. T8 screw (1pcs)
2. Coupling device (1pcs)
There are machine screws inside the coupling device, which is used
to tighten the motor shaft and screw rod.

Step 6
1. M3×6 hexagon round-head screws (4pcs)
2. Hexagonal isolation column (1pcs)
3. Step 7-1
4 in 1 terminal wire

Step 7-2
As shown above, installing the 4 in 1 terminal wire to its
corresponding position. Then there are two key slots on the metal sheet
part. Users can use a cable tie to fix the terminal wire through them.

Step 7-3
Step 8
1. M5×25 hexagon cup-head screws（4pcs）
2. 2020 aluminum profile—length 323mm（1pcs）

Step 9
1. X slider sheet（1pcs）2. belt（1pcs）
Step 10
1. M4×8 hexagon round-head screws（2pcs）
2. M4 boat-shape nut（2pcs）
3. 2020 aluminum profile—length 338mm（1pcs）
4. M5×18hexagon cup-head screws（2pcs）
The boat-shape nut may rotate during installation. Users could use
the screws to fix it on the aluminum profile.

Step 11
Installing the belt onto the 2020 aluminum profile.
Step 12-1

Step 12-2
1. M4 boat-shape nut（2pcs）
2. M4×8hexagon round-head screws（2pcs）
Notice: The boat-shape nut may rotate during installation. Users could
use the screws to fix it on the aluminum profile.
When installation, in order to tighten the pulley and the belt, users could
push the parts slowly in the X direction.
Step 13

1. M3×8 hexagon round-head screws（2pcs）
Step 14
1. feed tube（1pcs）
2. quick connector（2pcs）
Step 15

Step 16
1. M4×8 hexagon round-head screws（2pcs）
2. M4 boat-shape nut（2pcs）
The boat-shape nut may rotate during installation. Users could use
the screws to fix it on the aluminum profile.

Step 17
1. Type-C data cable（1pcs）2. cable tie（1pcs）
As shown above, there are two key slots on the metal sheet part.
Users can use a cable tie to fix the Type-C cable through them. But before
fixing the data cable, users would better leave a certain length at the
Type-C cable's end which closes to the nozzle. It facilitates the movement
of the nozzle.

Awareness: do not unplug the Type-C data cable when the machine
is on.
Step 18
1. M4×16 hexagon round-head screws（1pcs）
2. Z axis limit module
Fixing the Z-axis limit module on the aluminum profile by using the M4
threaded holes and the above screws.

Step 19
1. power switch
2. power cord socket
Confirming that the wiring is steady and correct. Inserting one end
of the power cord into the power cord socket and the other end into the
household power supply, and then turn on the power switch of the
machine.
Awareness: do not unplug the Type-C data cable when the machine
is on.