Show Tec Compact Lightset MKII User manual

Compact Power Lightset MKII V3
Highlite International B.V. –Vestastraat 2 –6468 EX –Kerkrade –the Netherlands
Ordercode: 30268
MANUAL
ENGLISH

1
Ordercode: 30268
Compact Power Lightset MKII
Table of contents
Warning ...............................................................................................................................................................................2
Safety Instructions .........................................................................................................................................................2
Operating Determinations ..........................................................................................................................................4
Rigging ............................................................................................................................................................................4
Connection with the mains.........................................................................................................................................5
Return Procedure..........................................................................................................................................................6
Claims..............................................................................................................................................................................6
Description of the device.................................................................................................................................................7
Optional accessories....................................................................................................................................................7
Backside .........................................................................................................................................................................8
Installation...........................................................................................................................................................................8
Set Up and Operation .......................................................................................................................................................8
Control Modes...............................................................................................................................................................9
One Compact Power Lightset (Auto Run, Built-in programs, Static Color) ....................................................9
One Compact Power Lightset (Sound-control)...................................................................................................9
Multiple Compact Power Lightsets (Master/Slave control)...............................................................................9
Multiple Compact Power Lightsets (DMX512 Mode)........................................................................................10
Fixture Linking ...............................................................................................................................................................11
Data Cabling...............................................................................................................................................................11
Control Panel ...............................................................................................................................................................12
DMX Control Mode.....................................................................................................................................................12
DMX Addressing ..........................................................................................................................................................12
Menu overview ................................................................................................................................................................13
Main Menu Options....................................................................................................................................................14
1. Auto Run Program............................................................................................................................................14
2. DMX Address/DMX configuration .................................................................................................................14
3. Slave mode...........................................................................................................................................................15
4. Sound-controlled mode.....................................................................................................................................15
5. Static Color ...........................................................................................................................................................15
6 Built-in Programs....................................................................................................................................................15
Footswitch ....................................................................................................................................................................16
DMX Channels .............................................................................................................................................................17
3 channels .................................................................................................................................................................17
4 channels .................................................................................................................................................................17
8 channels .................................................................................................................................................................17
14 channels...............................................................................................................................................................19
2 channels .................................................................................................................................................................21
15 channels...............................................................................................................................................................22
7 channels .................................................................................................................................................................25
Maintenance....................................................................................................................................................................26
Replacing a Fuse ........................................................................................................................................................26
Troubleshooting ...............................................................................................................................................................26
No Light.........................................................................................................................................................................26
No Response to DMX..................................................................................................................................................26
Product Specifications .............................................................................................................................................28
Dimensions........................................................................................................................................................................29

2
Ordercode: 30268
Compact Power Lightset MKII
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear to be damaged from shipping or the carton
itself shows signs of mishandling. Save the carton and all packing materials. In the event that the fixture
must be returned to the factory, it is important that the fixture be returned in the original factory box and
packing.
Your shipment includes:
●Showtec Compact Power Lightset
MKII
●Stand and carrying bag incl.
●Footcontroller included
●IEC powercable 5,0m
●User manual
LED Expected Lifespan
LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration
of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal or singular
optimum conditions. For this reason when all color LEDs are used at their fullest intensity, life of the LEDs is
significantly reduced. If improving the lifespan is of higher priority, place care in providing for lower
operational temperatures. This may include climatic-environmental and the reduction of overall
projection intensity.
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
●be qualified
●follow the instructions of this manual
Before your initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.

3
Ordercode: 30268
Compact Power Lightset MKII
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
●Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
●Never modify, bend, mechanically strain, put pressure on, pull or heat up the power cord.
●Never strain the cable insert or the female part in the device. There must always be sufficient cable
going to the device. Otherwise, the cable will be damaged, which can cause serious damage.
●Never remove warning or informative labels from the unit.
●Never use anything to cover the ground contact.
●Never lift the device holding it by the projector-head, as the mechanics may be damaged. Always
hold the device by the transport handles.
●Never place any material over the LEDs or lens.
●In case of rotating gobos: Never loosen the screws of the rotating gobo otherwise you risk opening of
the ball bearing.
●Never look directly into the light source.
●Never leave any cables lying around.
●Never use the device during thunderstorms, unplug the device immediately.
●Never leave various parts of the packaging (plastic bags, polystyrene foam, nails, etc.) within
children’s reach, as they are potential sources of danger.
●Never use a LED strip in sealed or hot places.
●Always mount a LED strip on aluminum or metal surface, for best heat dissipation.
●Do not insert objects into air vents.
●Do not open the device and do not modify the device.
●Do not connect this device to a dimmer pack.
●Do not switch the device on and off in short intervals, as this will reduce the device’s life.
●Do not touch the device’s housing bare-handed during its operation (housing becomes very hot).
Allow the device to cool for at least 5 minutes before handling.
●Do not shake the device. Avoid brute force when installing or operating the device.
●Only use the device indoors, avoid contact with water or other liquids (only applies to devices with
IP<=65).
●Only operate the device after having checked if the housing is firmly closed and all screws are tightly
fastened.
●Only operate the device after having familiarized with its functions.
●Avoid flames and do not put close to flammable liquids or gases.
●Always keep the case closed while operating.
●Always allow a free air space of at least 50 cm around the unit for ventilation.
●Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power cord holding it by the plug. Never pull out the plug by tugging the power cord.
●Make sure that the device is not exposed to extreme heat, moisture or dust.
●Make sure that the available voltage is not higher than stated on the rear panel.
●Make sure that the power cord is never crimped or damaged. Check the device and the power
cord from time to time.
●Make sure that the core diameter of extension cords and power cords is sufficient for the required
power consumption of the device.
●If the lens or LEDs are obviously damaged, it has to be replaced to prevent its functions from being
impaired, due to cracks or deep scratches.
●If the external cable is damaged, it has to be replaced by a qualified technician.
●If device was dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.

4
Ordercode: 30268
Compact Power Lightset MKII
●If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
●If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
●For adult use only. The device must be installed beyond the reach of children. Never leave the unit
running unattended.
●Never attempt to bypass the thermostatic switch or fuses.
●For replacement use fuses of same type and rating only.
●The user is responsible for correct positioning and operating of the device. The manufacturer will not
accept liability for damages caused by the misuse or incorrect installation of this device.
●This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
●Repairs, servicing and electric connection must be carried out by a qualified technician.
●WARRANTY: Till one year after date of purchase.
Note: WARRANTY on batteries is only 6 months after date of purchase.
When your battery remains flat after fully charging or it doesn’t function or doesn’t charge anymore,
you can order a new battery. The spare part number for the battery is on request.
Operating Determinations
●This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
●The minimum distance between light output and the illuminated surface must be bigger than 1
meter. (This distance may differ depending on the model. The exact minimum distance will be
mentioned in the corresponding manual.)
●To eliminate wear and improve lifespan, during periods of non-use, completely disconnect from
power via breaker or by unplugging.
●The maximum ambient temperature ta= 40°C must never be exceeded.
●The relative humidity must not exceed 50 % with an ambient temperature of 40°C.
●If this device is operated in any other way than the one described in this manual, the product may
suffer damages and the warranty becomes void.
●Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself!
Always let the installation be carried out by an authorized dealer!

5
Ordercode: 30268
Compact Power Lightset MKII
Procedure:
●If the Compact Power Lightset is lowered from the ceiling or high joists, professional trussing systems
have to be used.
●Use a clamp to mount the Compact Power Lightset, with the mounting-bracket, to the trussing
system.
●The Compact Power Lightset must never be fixed swinging freely in the room.
●The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety-cable.
●When rigging, derigging or servicing the Compact Power Lightset, always make sure, that the area
below the installation place is blocked and staying in the area is forbidden.
The Compact Lightset can be placed on a flat stage floor or mounted to any kind of truss by a clamp.
Improper installation can cause serious injuries and/or damage of property!
Connection with the mains
Connect the device to the mains with the power plug.
Always check if the right color cable is connected to the right place.
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
PHASE
N
BLUE
BLACK
SILVER
NEUTRAL
YELLOW/GREEN
GREEN
GREEN
PROTECTIVE
GROUND
Make sure that the device is always connected properly to the earth!
Improper installation can cause serious damage to people and property!

6
Ordercode: 30268
Compact Power Lightset MKII
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail [e-mail] and request an RMA prior to shipping the fixture.
Be prepared to provide the model number, serial number and a brief description of the cause of the
return. Be sure to properly pack fixture as any shipping damage resulting from inadequate packaging is
the customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
01) Your name.
02) Your address.
03) Your phone number.
04) A brief description of the symptoms.
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any short-
comings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to notify and submit claims with the shipper in the event that the fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
agreed otherwise in writing.
Complaints against us must be made known in writing or by fax within 10 working days after receipt of the
invoice. After this period, complaints will not be handled anymore.
Complaints will only be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement of which the obligation is resulting.

7
Ordercode: 30268
Compact Power Lightset MKII
Description of the device
Features
The Showtec Compact Power Lightset MKII is a T-bar with 4 LED spots on a light stand, packed in a hard
case and a stand. It is a plug and play set that offers internal chase programs but also can be controlled
by DMX or with the included footswitch.
●T-Bar with built-in controller
●3-in-1 RGB LEDs
●Stand included
●Carrying bag included
●Music-controlled via built-in microphone
●Via included Footswitch: Auto run, Sound, Freeze, Blackout
●Ideal for musicians, bands and mobile DJ
●Variable in stand height 1200-2000mm
●Power Supply: 100-240V AC, 50/60Hz
●Power Consumption: 90W
●Light source: 7x 3W RGB LEDs (1 spot)
●4-digit LED display for easy setup
●Control modes: Auto, Sound-controlled, Manual, Master/Slave, DMX
●Control protocol: DMX-512
●DMX channels: 2, 3, 4, 7, 8, 14 or 15 channels
●Dimmer: 0-100%
●Strobe: 0-20Hz
●Beam angle: 40°
●IP rating: IP-20
●Housing: Metal, black coated
●Fuse: 1A/250V
●Cooling: Convection
●Connections: IEC connectors (IN), 3-pin XLR (IN/OUT)
●Dimensions T-bar + 4 parcans: 1140 x 235 x 60 mm (LXWXH)
●Weight T-bar + 4 parcans: 8,7 kg
Note: Knowledge of DMX is required to fully utilize this unit.
Optional accessories
50717 LED Commander
D7026 Case for 4X compact lightsets
FL0910 DMX/AES-EBU XLR/m 3P.>XLR/F 3P.
FL4010 Bal. stereo Jack > stereo contra-jack

8
Ordercode: 30268
Compact Power Lightset MKII
Backside
Fig. 01
01) 7x 3W RGB LEDs (1 spot)
02) Ground/Earth connection
03) IEC Power In + Fuse 1A / 250V
04) Menu Buttons + LED display
05) Footswitch input
06) DMX signal connector (IN) 3-pin
07) DMX signal connector (OUT) 3-pin
Installation
Remove all packing materials from the Compact Power Lightset MKII.
Check that all foam and plastic padding is removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply.

9
Ordercode: 30268
Compact Power Lightset MKII
Control Modes
There are 6 modes:
Built-in programs
Auto Run
Static Color
Sound-controlled
Master/Slave
DMX-512 (2, 3, 4, 7, 8, 14 or 15 CH)
One Compact Power Lightset (Auto Run, Built-in programs, Static Color)
01) Fasten the effect light onto firm trussing or place it on the floor. Leave at least 0,5 meter on all sides
for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) When the Compact Power Lightset is not connected by a DMX-cable, it functions as a stand-alone
device. Please see pages 14-16 for more information about the built-in programs, auto run mode or
static color.
One Compact Power Lightset (Sound-control)
01) Fasten the effect light onto firm trussing or place it on the floor. Leave at least 0,5 meter on all sides
for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) When the Compact Power Lightset is not connected by a DMX-cable, it functions as a stand-alone
device.
05) Turn on the music. If the device is set to sound-control, then the Compact Power Lightset will react
to the beat of the music. Please see page 15 for more information about the Sound-controlled
mode.
Multiple Compact Power Lightsets (Master/Slave control)
01) Fasten the effect light onto firm trussing or place it on the floor. Leave at least 0,5 meter on all sides
for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) Use a 3-p XLR cable to connect the Compact Power Lightsets and other devices.
The pins:
1. Earth
2. Signal (-)
3. Signal (+)
05) Link the units as shown in Fig. 02, connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second and third units. You can use the
same functions on the master device as described on pages 14-16 (Sound controlled, Manual
control, Auto run, Built-in Programs). This means you can set your desired operation mode on the
master device and all slave devices will react the same as the master device.
Multiple Compact Power Lightsets (Master/Slave control)
Fig. 02

10
Ordercode: 30268
Compact Power Lightset MKII
Multiple Compact Power Lightsets (DMX512 Mode)
01) Fasten the effect light onto firm trussing or place it on the floor. Leave at least 0,5 meter on all sides
for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Use a 3-p XLR cable to connect the Compact Power Lightsets and other devices.
04) Link the units as shown in Fig. 03, Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second and third units.
05) Supply electric power: Plug electric mains power cords into each unit's IEC socket, then plug the
other end of the mains power cord into proper electric power supply sockets, starting with the first
unit. Do not supply power before the whole system is set up and connected properly.
Multiple Compact Power Lightsets DMX Set Up
Fig. 03
Note: Link all cables before connecting electric power!

11
Ordercode: 30268
Compact Power Lightset MKII
Fixture Linking
You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to
run synchronized shows on two or more fixtures set to a master/slave operating mode. The combined
number of channels required by all the fixtures on a serial data link determines the number of fixtures the
data link can support.
Important:
Fixtures on a serial data link must be daisy-chained in a single line. To comply with the
EIA-485 standard, no more than 30 devices should be connected on one data link.
Connecting more than 30 fixtures on one serial data link without the use of a DMX
optically isolated splitter may result in deterioration of the digital DMX signal.
Maximum recommended DMX data link distance: 100 meters
Maximum recommended number of fixtures on a DMX data link: 30 fixtures
Data Cabling
To link fixtures together you must obtain data cables. You can purchase DAP Audio certified DMX cables
directly from a dealer/distributor or construct your own cable. If you choose to create your own cable
please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic
interference.
DAP Audio DMX Data Cables
●DAP Audio Basic microphone cable for allround use. bal. XLR/M 3-pin > XLR/F 3-pin. Ordercode
FL01150 (1,5 m), FL013 (3 m), FL016 (6 m), FL0110 (10 m), FL0115 (15 m), FL0120 (20 m).
●DAP Audio X-type data cable XLR/M 3-pin > XLR/F 3-pin. Ordercode FLX0175 (0,75 m),
●FLX01150 (1,5 m), FLX013 (3 m), FLX016 (6 m), FLX0110 (10 m).
●DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL71150 (1,5 m), FL713 (3 m), FL716 (6 m), FL7110 (10 m).
●DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL7275 (0,75 m), FL72150 (1,5 m), FL723 (3 m), FL726 (6 m), FL7210 (10 m).
●DAP Audio 110 Ohm cable with digital signal transmission. Ordercode FL0975 (0,75 m),
●FL09150 (1,5 m), FL093 (3 m), FL096 (6 m), FL0910 (10 m), FL0915 (15 m), FL0920 (20 m).
●DAP Audio DMX adapter: 5-pin/3-pin. Ordercode FLA29.
●DAP Audio DMX adapter: 3-pin/5-pin. Ordercode FLA30.
●DAP Audio DMX Terminator 3-pin. Ordercode FLA42.
●DAP Audio DMX Terminator 5-pin. Ordercode FLA43.
The Compact Power Lightset can be operated with a controller in control mode or without the controller
in stand-alone mode.

12
Ordercode: 30268
Compact Power Lightset MKII
Control Panel
A. LED Display
B. Mode button
C. Setup Button
D. Up Button
E. Down Button
Fig. 04
DMX Control Mode
The fixtures are individually addressed on a data-link and connected to the controller.
The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it,
the controller will display the saved DMX address the next time.)
DMX Addressing
The control panel on the backside of the device allows you to assign the DMX fixture address, which is
the first channel from which the Compact Power Lightset will respond to the controller. Please note when
you use the controller, the unit has up to 15 channels. When using multiple Compact Power Lightsets ,
make sure you set the DMX addresses right. Therefore, the DMX address of the first Compact Power
Lightset should be 1(d001); the DMX address of the second Compact Power Lightset should be 1+15=16
(d016); the DMX address of the third Compact Power Lightset should be 16+15=31 (d031), etc. Please, be
sure that you do not have any overlapping channels in order to control each Compact Power Lightset
correctly. If two or more Compact Power Lightsets are addressed similarly, they will work similarly.
Controlling:
After having addressed all Compact Power Lightsets, you may now start operating these via your lighting
controller.
Note: After switching on, the Compact Power Lightset will automatically detect whether DMX 512 data is
received or not. The problem may be:
●The XLR cable from the controller is not connected with the input of the Compact Power Lightset.
●The controller is switched off or defective, the cable or connector is defective, or the signal wires are
swapped in the input connector.
Note: It is necessary to insert a XLR termination plug (with 120 Ohm) in the last fixture in order to ensure
proper transmission on the DMX data link.

13
Ordercode: 30268
Compact Power Lightset MKII
Menu overview

14
Ordercode: 30268
Compact Power Lightset MKII
Main Menu Options
Auto run
DMX address/DMX configuration
Slave mode
Sound-controlled mode
Static Color
Built-in programs
1. Auto Run Program
With this menu you can activate the Auto run mode of the Compact Power Lightset.
01) Press the Mode button on the device until the display shows .
02) Press the Setup button to enter the submenu.
03) Press the Setup button to choose between 4 options:
Number of loops from 001-100
Speed between 01-99 and FL
Fade time from 00-99
Strobe frequency between 00-99
04) Press the Up and Down buttons to set one of the desired options.
2. DMX Address/DMX configuration
With this menu you can set the DMX address and choose a DMX configuration.
01) Press the Mode button until the display shows .
02) You can choose 512 different DMX addresses.
03) Press the Up/Down buttons to select the required address between .
04) If you press the Setup button, you can choose a different DMX Mode:
3 channels
4 channels
8 channels
14 channels
2 channels
15 channels
7 channels

15
Ordercode: 30268
Compact Power Lightset MKII
3. Slave mode
With this menu you can set the device as a Slave.
01) Press the Mode button until the display shows .
02) If the device has not been set to slave, it is automatically classified as a master device. All slave
devices will follow the master movement. If the device has been set to slave, it will react the same as
its master device.
4. Sound-controlled mode
With this menu you can activate the sound-controlled mode.
01) Press the Mode button until the display shows .
02) Press the Up/Down buttons to select the required sound sensitivity between .
03) Turn on the music and the Compact Lightset will start the Sound-controlled program.
5. Static Color
With this menu you can set the static colors.
01) Press the Mode button until the display shows .
02) Press the Setup button to enter the submenu.
03) Press the Up/Down buttons to select the required color:
Gradual adjustment Red intensity between 0-255
Gradual adjustment Green intensity between 0-255
Gradual adjustment Blue intensity between 0-255
6 Built-in Programs
With this menu you can choose a built-in program.
01) Press the Mode button, until the display shows .
02) Press the Up and Down buttons to choose between 14 built-in programs.
03) If you choose , press the Setup button to enter the submenu:
Red
Red + Green
Green
Green + Blue
Blue
Red + Blue
Red + Green + Blue
Off
04) Choose the desired color and press the Setup button to set the strobe frequency.
05) Press the Up and Down buttons to choose the strobe frequency, the adjustment range is between
.
06) If you choose , press the Setup button to set the speed, fade time or strobe
frequency. The adjustment range is between (speed),
(fade) and (strobe).

16
Ordercode: 30268
Compact Power Lightset MKII
07) If you choose , press the Setup button to scroll between the speed, fade time,
strobe frequency or choose colors from segment 1 or 2:
Footswitch
7. Footswitch Function (footswitch (30269) included !)
01) Step on the Auto Run pedal to enter the auto running mode.
02) Step on the Music pedal to enter the sound active mode.
03) Step on the Freeze pedal to pause the function; Step on this pedal again to restart operation.
04) Step on the Blackout pedal to turn off all lights and then step on it again to enter the previous mode.

17
Ordercode: 30268
Compact Power Lightset MKII
DMX Channels
3 channels
Channel 1 –Red Dimmer intensity
0-255
Gradual adjustment Red from 0-100%
Channel 2 –Green Dimmer intensity
0-255
Gradual adjustment Green from 0-100%
Channel 3 –Blue Dimmer intensity
0-255
Gradual adjustment Blue from 0-100%
4 channels
Channel 1 –Red Dimmer intensity (CH4 must be set between 1-255 )
0-255
Gradual adjustment Red from 0-100%
Channel 2 –Green Dimmer intensity (CH4 must be set between 1-255 )
0-255
Gradual adjustment Green from 0-100%
Channel 3 –Blue Dimmer intensity (CH4 must be set between 1-255 )
0-255
Gradual adjustment Blue from 0-100%
Channel 4 –Master Dimmer intensity
0-255
Gradual adjustment, from dark to brightest 0-100%
8 channels
Channel 1 –Red Dimmer intensity
(CH8 must be set between 1-255 )
0-255
Gradual adjustment Red from 0-100%
Channel 2 –Green Dimmer intensity
(CH8 must be set between 1-255 )
0-255
Gradual adjustment Green from 0-100%

18
Ordercode: 30268
Compact Power Lightset MKII
Channel 3 –Blue Dimmer intensity
(CH8 must be set between 1-255 )
0-255
Gradual adjustment Blue from 0-100%
Channel 4 –Red Dimmer intensity
(CH8 must be set between 1-255 )
0-255
Gradual adjustment Red from 0-100%
Channel 5 –Green Dimmer intensity
(CH8 must be set between 1-255 )
0-255
Gradual adjustment Green from 0-100%
Channel 6 –Blue Dimmer intensity
(CH8 must be set between 1-255 )
0-255
Gradual adjustment Blue from 0-100%
Channel 7 –Strobe (CH1, CH2, CH3, CH4, CH5 or CH6 and CH8 must be set between 1-255 )
0-255
Strobe flash frequency, from slow to fast
Channel 8 –Master Dimmer intensity
0-255
Gradual adjustment, from dark to brightest 0-100%

19
Ordercode: 30268
Compact Power Lightset MKII
14 channels
Channel 1 –Red Dimmer intensity
(CH14 must be set between 1-255 )
0-255
Gradual adjustment Red from 0-100%
Channel 2 –Green Dimmer intensity
(CH14 must be set between 1-255 )
0-255
Gradual adjustment Green from 0-100%
Channel 3 –Blue Dimmer intensity
(CH14 must be set between 1-255 )
0-255
Gradual adjustment Blue from 0-100%
Channel 4 –Red Dimmer intensity
(CH14 must be set between 1-255 )
0-255
Gradual adjustment Red from 0-100%
Channel 5 –Green Dimmer intensity
(CH14 must be set between 1-255 )
0-255
Gradual adjustment Green from 0-100%