Show Tec Vintage Blaze 33 Value Line V2 User manual

Vintage Blaze ’33 Value Line V2
Highlite International B.V. –Vestastraat 2 –6468 EX –Kerkrade –the Netherlands
Ordercode: 43324
MANUAL
ENGLISH

1
Ordercode: 43324
Vintage Blaze ’33 Value Line
Table of contents
Warning ...............................................................................................................................................................................2
Safety Instructions .........................................................................................................................................................2
Operating Determinations ..........................................................................................................................................4
Rigging ............................................................................................................................................................................4
Connection with the mains.........................................................................................................................................5
Return Procedure..........................................................................................................................................................6
Claims..............................................................................................................................................................................6
Description of the device.................................................................................................................................................7
Optional accessories....................................................................................................................................................7
Front.................................................................................................................................................................................7
Backside .........................................................................................................................................................................8
Installation...........................................................................................................................................................................8
Installing the Lamp........................................................................................................................................................8
Set Up and Operation .....................................................................................................................................................12
Control Modes.............................................................................................................................................................12
One Vintage (Static Color) ....................................................................................................................................12
Multiple Vintages (DMX Control) ..........................................................................................................................12
Fixture Linking ...............................................................................................................................................................13
Data Cabling...............................................................................................................................................................13
Control Panel ...............................................................................................................................................................14
Control Mode ..............................................................................................................................................................14
DMX Addressing ..........................................................................................................................................................14
Menu Overview...........................................................................................................................................................15
Main Menu Options ....................................................................................................................................................16
1. DMX address.........................................................................................................................................................16
2. DMX configuration ..............................................................................................................................................16
3. Manual control tungsten lamp .........................................................................................................................16
4. Manual control LEDs (Red) for outer ring........................................................................................................17
5. Manual control LEDs (Green) for outer ring....................................................................................................17
6. Manual control LEDs (Blue) for outer ring........................................................................................................17
7. Manual control LEDs (Red) for center .............................................................................................................17
8. Manual control LEDs (Green) for center .........................................................................................................17
9. Manual control LEDs (Blue) for center .............................................................................................................17
10. Static preset colors............................................................................................................................................18
11. Dimming curve tungsten lamp .......................................................................................................................18
12. Dimming curve LEDs..........................................................................................................................................18
DMX Channels .............................................................................................................................................................19
1 channel ..................................................................................................................................................................19
2 channels .................................................................................................................................................................19
4 channels .................................................................................................................................................................20
11 channels...............................................................................................................................................................20
Maintenance....................................................................................................................................................................22
Changing the Lamp...................................................................................................................................................22
Troubleshooting ...............................................................................................................................................................22
No Light.........................................................................................................................................................................22
No Response to DMX..................................................................................................................................................22
Product Specifications....................................................................................................................................................24
Dimensions........................................................................................................................................................................25
Notes ..................................................................................................................................................................................26

2
Ordercode: 43324
Vintage Blaze ’33 Value Line
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
●Showtec Vintage Blaze ’33 Value Line
●Powercon Power cable (1,4 m)
●User manual
LED Expected Lifespan
LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration
of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal or singular
optimum conditions. For this reason, when all color LEDs are used at their fullest intensity, life of the LEDs is
significantly reduced. If improving the lifespan is of higher priority, place care in providing for lower
operational temperatures. This may include climatic-environmental and the reduction of overall
projection intensity.
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
●be qualified
●follow the instructions of this manual

3
Ordercode: 43324
Vintage Blaze ’33 Value Line
Before the initial start-up, please make sure that there is no damage caused by transportation.
Should there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes contained in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
●Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
●Never remove warning or informative labels from the unit.
●Never use anything to cover the ground contact.
●Never lift the fixture holding it by the projector-head, as the mechanics may be damaged. Always
hold the fixture by the transport handles.
●Never place any material over the lens.
●Never look directly into the light source.
●Never leave any cables lying around.
●Never loosen the screws of the rotating gobo otherwise you risk opening of the ball bearing.
●Do not insert objects into air vents.
●Do not connect this device to a dimmer pack.
●Do not switch the device on and off in short intervals, as this will reduce the device’s life.
●Do not touch the device’s housing bare-handed during its operation (housing becomes very hot).
Allow the fixture to cool for at least 5 minutes before handling.
●Do not shake the device. Avoid brute force when installing or operating the device.
●Only use the device indoors, avoid contact with water or other liquids.
●Only operate the fixture after having checked if the housing is firmly closed and all screws are tightly
fastened.
●Only operate the device after having familiarized with its functions.
●Avoid flames and do not put close to flammable liquids or gases.
●Always keep the case closed while operating.
●Always allow a free air space of at least 50 cm around the unit for ventilation.
●Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power cord holding it by the plug. Never pull out the plug by tugging the power cord.
●Make sure that the device is not exposed to extreme heat, moisture or dust.
●Make sure that the available voltage is not higher than stated on the rear panel.
●Make sure that the power cord is never crimped or damaged. Check the device and the power
cord from time to time.
●If the lens is obviously damaged, it has to be replaced.
●If device was dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
●If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
●If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
●For adult use only. The fixture must be installed beyond the reach of children. Never leave the unit
running unattended.
●Never attempt to bypass the thermostatic switch or fuses.
●For replacement use fuses of same type and rating only.

4
Ordercode: 43324
Vintage Blaze ’33 Value Line
●The user is responsible for correct positioning and operating of the Vintage Blaze ’33 Value Line. The
manufacturer will not accept liability for damages caused by the misuse or incorrect installation of
this device.
●This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
●During the initial start-up some smoke or smell may arise. This is a normal process and does not
necessarily mean that the device is defective.
●Repairs, servicing and electric connection must be carried out by a qualified technician.
●WARRANTY: Till one year after date of purchase.
Operating Determinations
●This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
●The minimum distance between light output and the illuminated surface must be bigger than 1
meter.
●The maximum ambient temperature ta= 40°C must never be exceeded.
●The relative humidity must not exceed 50 % with an ambient temperature of 40°C.
●If this device is operated in any other way than the one described in this manual, the product may
suffer damages and the warranty becomes void.
●Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
●If the Vintage Blaze is lowered from the ceiling or high joists, professional trussing systems have to be
used.
●Use a clamp to mount the Vintage Blaze, with the mounting bracket, to the trussing system.
●The Vintage Blaze must never be fixed swinging freely in the room.
●The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety cable.
●When rigging, derigging or servicing the Vintage Blaze, always make sure, that the area below the
installation site is secured and that there are not any unauthorized people around.

5
Ordercode: 43324
Vintage Blaze ’33 Value Line
The Vintage Blaze ‘33 Value Line can be mounted to any kind of truss with a clamp.
Improper installation can cause serious injuries and/or damage of property!
Connection with the mains
Connect the device to the mains with the power-plug.
Always check if the right color cable is connected to the right place.
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
PHASE
N
BLUE
BLACK
SILVER
NEUTRAL
YELLOW/GREEN
GREEN
GREEN
PROTECTIVE
GROUND
Make sure that the device is always properly connected to the earth!
Improper installation can cause serious injuries and/or damage of property!

6
Ordercode: 43324
Vintage Blaze ’33 Value Line
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail aftersal[email protected] and request an RMA prior to shipping the
fixture. Be prepared to provide the model number, serial number and a brief description of the cause for
the return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is
the customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
01) Your name
02) Your address
03) Your phone number
04) A brief description of the symptoms
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any short-
comings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to report and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
agreed otherwise in writing.
Complaints against us must be prepared in writing or sent by fax within 10 working days after receipt of
the invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement from which the obligation is resulting.

7
Ordercode: 43324
Vintage Blaze ’33 Value Line
Description of the device
Features
The Vintage Blaze ‘33 Value Line is a retro floodlight with high output and great effects.
●Retro design
●Input voltage: 240V AC, 50/60Hz
●Power consumption: 680W
●DMX channels: 1, 2, 4 or 11 channels
●LCD display for easy setup
●Light source LEDs: 5050 RGB LEDs
●Lampsocket: GY9.5
●Lamp: GY9.5 230V 300W (not included)
●Dimmer: On board
●Dimmer curves: Linear, S-Curve, Square, I-Square
●Control modes: Static color, DMX
●Control protocol: DMX-512
●Strobe: 0-20Hz
●Protection rate: IP-20
●Housing: Aluminum
●Cooling: Convection
●Connections: Powercon connectors (IN/OUT), 3-pin XLR (IN/OUT), 5-pin XLR (IN/OUT)
●Dimensions: 500 x 430 x 335 mm incl. bracket (LxWxH)
●Weight: 5,88 kg
Optional accessories
80703O GY9.5 230V 300W Osram
80703G GY9.5 240V 300W GE
Front
Fig. 01
01) 5050 RGB LED strip
02) 5050 RGB center LED
03) Lamp grill
04) Adjustment screw
05) Bulb GY9.5 230V 300W
06) Double mounting bracket

8
Ordercode: 43324
Vintage Blaze ’33 Value Line
Backside
Fig. 02
07) Ground/Earth connection
08) Blue Powercon connector 100-240V IN
09) White Powercon connector 100-240V OUT
10) Automatic circuit breaker
11) LCD display + menu buttons
12) RJ-45 connector for updating software.
Note: updating software is only allowed by a Highlite technician
13) 3-pin DMX signal connector OUT
14) 3-pin DMX signal connector IN
15) 5-pin DMX signal connector OUT
16) 5-pin DMX signal connector IN
Installation
Remove all packing materials from the Vintage Blaze ‘33 Value Line. Check if all foam and plastic
padding is removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Installing the Lamp
The Showtec Vintage Blaze ‘33 Value Line uses the GY9.5 lamp (ordercode 80703O or 80703G) as
manufactured by all popular manufacturers. Use only the appropriate lamp for your unit.
Note that, product versions that use other lamps, may be offered in the future. Check your product
specification label for information.
Always disconnect from electric mains power supply before changing lamps.
The lamp has to be replaced when it is damaged or deformed due to the heat.
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the
device was not designed for.
Damages caused by non-observance are not subject to warranty.

9
Ordercode: 43324
Vintage Blaze ’33 Value Line
Procedure:
01) Disconnect the Vintage from power before installing the lamp.
02) Remove the 4 screws at the top of the fixture (Fig.03).
03) Carefully disconnect the LED strip from the 2 connectors at the side of the lamp grill (Fig.04).
04) Remove the lamp grill (Fig.05).
05) Disconnect the lamp holder at the bottom of the fixture (Fig.06).
06) Remove the lamp from the box and hold it by the base. Read the lamp instructions. Do not touch the
lamp bulb glass. Oil on hands shortens the lamp’s lifespan. If you touch the bulb glass, wipe it off with
a clean, lint free towel and rubbing alcohol. Insert the lamp (Fig.07).
07) Carefully connect the LED strip to the 2 connectors (Fig.08).
08) Replace the lamp grill (Fig.09) and fasten the 4 screws at the top of the fixture (Fig.10).
09) The Vintage is now ready to use.
Fig. 03
Fig. 04

10
Ordercode: 43324
Vintage Blaze ’33 Value Line
Fig. 05
Fig. 06
Fig. 07
Fig. 08
Fig. 09

11
Ordercode: 43324
Vintage Blaze ’33 Value Line
Fig. 10
Fig. 11
Fig. 12

12
Ordercode: 43324
Vintage Blaze ’33 Value Line
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply.
Control Modes
There are 2 modes:
●Static Color (manual)
●DMX-512 (1CH, 2CH, 4CH or 11CH)
One Vintage (Static Color)
01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) When the Vintage is not connected with a DMX cable, it functions as a stand-alone device. Please
see pages 16 –18 for more information about Static Color.
Multiple Vintages (DMX Control)
01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Use a 3-pin XLR cable to connect the Vintages and other devices.
04) Link the units as shown in Fig. 13. Connect the first unit's DMX "out" socket with the second unit's "in"
socket, using a DMX-signal cable. Repeat this process to link the second, third and fourth units.
05) Supply electric power: Plug electric mains power cords into each unit's Powercon socket, then plug
the other end of the mains power cord into proper electric power supply sockets, starting with the
first unit. Do not supply power before the whole system is set up and connected properly.

13
Ordercode: 43324
Vintage Blaze ’33 Value Line
Multiple Vintages DMX Set Up
Fig. 13
Note: Link all cables before connecting electric power
Fixture Linking
You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to
run synchronized shows of two or more fixtures set to a master/slave operating mode. The combined
number of channels required by all the fixtures on a serial data link determines the number of fixtures the
data link can support.
Important:
Fixtures on a serial data link must be daisy-chained in a single line. To comply with the
EIA-485 standard, no more than 30 devices should be connected on one data link.
Connecting more than 30 fixtures on one serial data link without the use of a DMX
optically isolated splitter may result in deterioration of the digital DMX signal.
Maximum recommended DMX data link distance: 100 meters
Maximum recommended number of fixtures on a DMX data link: 30 fixtures
Maximum recommended number of fixtures on a power link @ 240V: 3 fixtures
Data Cabling
To link fixtures together, you must obtain data cables. You can purchase DAP Audio certified DMX cables
directly from a dealer/distributor or construct your own cable. If you choose to create your own cable,
please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic
interference.
DAP Audio DMX Data Cables
●DAP Audio Basic microphone cable for allround use. bal. XLR/M 3-pin > XLR/F 3-pin. Ordercode
FL01150 (1,5 m), FL013 (3 m), FL016 (6 m), FL0110 (10 m), FL0115 (15 m), FL0120 (20 m).
●DAP Audio X-type data cable XLR/M 3-pin > XLR/F 3-pin. Ordercode FLX0175 (0,75 m),
●FLX01150 (1,5 m), FLX013 (3 m), FLX016 (6 m), FLX0110 (10 m).
●DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL71150 (1,5 m), FL713 (3 m), FL716 (6 m), FL7110 (10 m).
●DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL7275 (0,75 m), FL72150 (1,5 m), FL723 (3 m), FL726 (6 m), FL7210 (10 m).
●DAP Audio 110 Ohm cable with digital signal transmission. Ordercode FL0975 (0,75 m),
●FL09150 (1,5 m), FL093 (3 m), FL096 (6 m), FL0910 (10 m), FL0915 (15 m), FL0920 (20 m).
●DAP Audio DMX adapter: 3-pin/5-pin. Ordercode FLA30.
The Vintage Blaze ‘33 Value Line can be operated with a controller in control mode or without the
controller in stand-alone mode.

14
Ordercode: 43324
Vintage Blaze ’33 Value Line
Control Panel
A) LCD display
B) Menu button
C) Up button
D) Down button
Fig. 14
Control Mode
The fixtures are individually addressed on a data-link and connected to the controller.
The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it,
the controller will display the saved DMX address, next time.)
DMX Addressing
The control panel on the back side of the device allows you to assign DMX fixture addresses, which is the
first channel with which the Vintage will respond to the controller.
Please note, when you use the controller, the unit has 11 channels.
When using multiple Vintages, make sure you set the DMX addresses right.
Therefore, the DMX address of the first Vintage should be 1(001); the DMX address of the second Vintage
should be 1+11=12 (012); the DMX address of the third Vintage should be 12+11=23 (023), etc. Please, be
sure that you do not have any overlapping channels in order to control each Vintage correctly. If two or
more Vintages are addressed similarly, they will work similarly.
Controlling:
After having addressed all Vintage Blaze’33 Value Line fixtures, you may now start operating these via
your lighting controller.
Note: After switching on, the Vintage will automatically detect whether DMX 512 data is received or not.
If there is no data received at the DMX-input, the problem may be:
●The XLR cable from the controller is not connected with the input of the Vintage.
●The controller is switched off or defective, the cable or connector is detective, or the signal wires are
swapped in the input connector.
Note: It is necessary to insert an XLR termination plug (with 120 Ohm) in the last fixture in order to ensure
proper transmission on the DMX data link.

15
Ordercode: 43324
Vintage Blaze ’33 Value Line
Menu Overview

16
Ordercode: 43324
Vintage Blaze ’33 Value Line
Main Menu Options
DMX address
DMX configuration
Manual control tungsten lamp
Outer ring, manual control Red LEDs
Outer ring, manual control Green LEDs
Outer ring, manual control Blue LEDs
Center, manual control Red LEDs
Center, manual control Green LEDs
Center, manual control Blue LEDs
Static preset colors
Dimming curve tungsten lamp
Dimming curve LEDs
1. DMX address
With this menu you can set the DMX address.
01) Press the Menu button until the display shows .
02) Press the Up and Down buttons to set the desired DMX address.
03) The adjustment range is between .
2. DMX configuration
With this menu you can set the desired DMX configuration.
01) Press the Menu button until the display shows .
02) Press the Up and Down buttons to set the desired DMX configuration.
03) The adjustment range is between .
3. Manual control tungsten lamp
With this menu you can set the intensity of the tungsten lamp.
01) Press the Menu button until the display shows .
02) Press the Up and Down buttons to set the intensity of the bulb.
03) The adjustment range is between , from minimum intensity to maximum
intensity.

17
Ordercode: 43324
Vintage Blaze ’33 Value Line
4. Manual control LEDs (Red) for outer ring
With this menu you can set the Red intensity of the LEDs.
01) Press the Menu button until the display shows .
02) Press the Up and Down buttons to set the intensity of the LEDs.
03) The adjustment range is between , from minimum intensity to maximum
intensity.
5. Manual control LEDs (Green) for outer ring
With this menu you can set the Green intensity of the LEDs.
01) Press the Menu button until the display shows .
02) Press the Up and Down buttons to set the intensity of the LEDs.
03) The adjustment range is between , from minimum intensity to maximum
intensity.
6. Manual control LEDs (Blue) for outer ring
With this menu you can set the Blue intensity of the LEDs.
01) Press the Menu button until the display shows .
02) Press the Up and Down buttons to set the intensity of the LEDs.
03) The adjustment range is between , from minimum intensity to maximum
intensity.
7. Manual control LEDs (Red) for center
With this menu you can set the Red intensity of the LEDs.
04) Press the Menu button until the display shows .
05) Press the Up and Down buttons to set the intensity of the LEDs.
06) The adjustment range is between , from minimum intensity to maximum
intensity.
8. Manual control LEDs (Green) for center
With this menu you can set the Green intensity of the LEDs.
04) Press the Menu button until the display shows .
05) Press the Up and Down buttons to set the intensity of the LEDs.
06) The adjustment range is between , from minimum intensity to maximum
intensity.
9. Manual control LEDs (Blue) for center
With this menu you can set the Blue intensity of the LEDs.
04) Press the Menu button until the display shows .
05) Press the Up and Down buttons to set the intensity of the LEDs.
06) The adjustment range is between , from minimum intensity to maximum
intensity.

18
Ordercode: 43324
Vintage Blaze ’33 Value Line
10. Static preset colors
With this menu you can choose one of the 35 preset colors.
01) Press the Menu button until the display shows .
02) Press the Up and Down buttons choose one of the colors.
03) The adjustment range is between .
11. Dimming curve tungsten lamp
With this menu you can adjust the dimming of the tungsten lamp by choosing a dimming curve.
01) Press the Menu button until the display shows .
02) Press the Up and Down buttons to choose one of the 4 curves.
03) The adjustment range is between .
12. Dimming curve LEDs
With this menu you can adjust the dimming of the LEDs by choosing a dimming curve.
01) Press the Menu button until the display shows .
02) Press the Up and Down buttons to choose one of the 4 curves.
03) The adjustment range is between .
FIg.15

19
Ordercode: 43324
Vintage Blaze ’33 Value Line
DMX Channels
1 channel
Channel 1 –Tungsten lamp white intensity
0-255
Gradual adjustment White from 0 –100%
2 channels
Channel 1 –Tungsten lamp white intensity
0-255
Gradual adjustment White from 0 –100%
Channel 2 –Preset colors LEDs
0-4
No function
5-11
Color 1
12-18
Color 2
19-25
Color 3
26-32
Color 4
33-39
Color 5
40-46
Color 6
47-53
Color 7
54-60
Color 8
61-67
Color 9
68-74
Color 10
75-81
Color 11
82-88
Color 12
89-95
Color 13
96-102
Color 14
103-109
Color 15
110-116
Color 16
117-123
Color 17
124-130
Color 18
131-137
Color 19
138-144
Color 20
145-151
Color 21
152-158
Color 22
159-165
Color 23
166-172
Color 24
173-179
Color 25
180-186
Color 26
187-193
Color 27
194-200
Color 28
201-207
Color 29
208-214
Color 30
215-221
Color 31
222-227
Color 32
228-234
Color 33
235-241
Color 34
242-255
Color 35