Show Tec Pixel Bar 8 COB User manual

Pixel Bar 8 COB
ORDERCODE 41266
Highlite International B.V.
Vestastraat 2
6468 EX Kerkrade
The Netherlands
Phone: [phone]

Congratulations!
You have bought a great, innovative product from Showtec.
The Showtec Pixel Bar 8 COB brings excitement to any venue. Whether you want simple plug-&-play
action or a sophisticated DMX show, this product provides the effect you need.
You can rely on Showtec, for more excellent lighting products.
We design and manufacture professional light equipment for the entertainment industry.
New products are being launched regularly. We work hard to keep you, our customer, satisfied.
For more information: [e-mail]
You can get some of the best quality, best priced products on the market from Showtec.
So next time, turn to Showtec for more great lighting equipment.
Always get the best -- with Showtec !
Thank you!

1
Showtec
Showtec Pixel Bar 8 COB ™ Product Guide
Warning ...............................................................................................................................................................................2
Safety Instructions .........................................................................................................................................................2
Operating Determinations ..........................................................................................................................................4
Rigging ............................................................................................................................................................................4
Return Procedure..........................................................................................................................................................5
Claims..............................................................................................................................................................................5
Description of the device.................................................................................................................................................6
Overview ........................................................................................................................................................................6
Backside .........................................................................................................................................................................6
Set Up and Operation .......................................................................................................................................................7
Control Modes...............................................................................................................................................................7
One Pixel Bar (Built-in Programs 1-24, Auto Program, Static Color)................................................................7
One Pixel Bar (Sound control)................................................................................................................................7
Multiple Pixel Bars (Master/Slave control)............................................................................................................7
Multiple Pixel Bars (DMX Control) ..........................................................................................................................8
Fixture Linking.................................................................................................................................................................9
Data Cabling.................................................................................................................................................................9
Control Panel ...............................................................................................................................................................10
DMX Control Mode.....................................................................................................................................................10
DMX Addressing ..........................................................................................................................................................10
Menu Overview...........................................................................................................................................................11
Main Menu Options....................................................................................................................................................12
1. DMX Mode ..........................................................................................................................................................12
2. Slave Mode .........................................................................................................................................................12
3. Static Color Mode..............................................................................................................................................13
4. Built-in Programs .................................................................................................................................................13
5. Auto Run Programs ............................................................................................................................................13
6. Sound control Mode..........................................................................................................................................13
DMX Channels .............................................................................................................................................................14
2 Channels...............................................................................................................................................................14
3 Channels...............................................................................................................................................................15
5 Channels...............................................................................................................................................................15
6 Channels...............................................................................................................................................................15
12 Channels.............................................................................................................................................................16
24 Channels.............................................................................................................................................................17
Maintenance....................................................................................................................................................................19
Replacing a Fuse ........................................................................................................................................................19
Troubleshooting ...............................................................................................................................................................19
No Light.........................................................................................................................................................................19
No Response to DMX..................................................................................................................................................19
Product Specification .....................................................................................................................................................21

2
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
• Showtec Pixel Bar 8 COB with IEC powercable 1,35m
•User manual
LED Expected Lifespan
LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration
of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal or singular
optimum conditions. For this reason when all color LEDs are used at their fullest intensity, life of the LEDs is
significantly reduced. It is estimated that a viable lifespan of 40,000 to 50,000 hours will be achieved
under normal operational conditions. If improving on this lifespan expectancy is of a higher priority, place
care in providing for lower operational temperatures. This may include climatic-environmental and the
reduction of overall projection intensity.
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
-be qualified
-follow the instructions of this manual
Before your initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!
CAUTION! Be careful with your operations.
With a dangerous voltage you can suffer
a dangerous electric shock when touching the wires!
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!

3
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-
observance of this manual or any unauthorized modification to the device.
Never let the power-cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution!
Never remove warning or informative labels from the unit.
Do not open the device and do not modify the device.
Never use anything to cover the ground contact.
Never leave the device run without a lamp!
Never look directly into the light source.
Never leave any cables lying around.
Do not insert objects into air vents.
Do not connect this device to a dimmerpack.
Do not switch the device on and off in short intervals, as this would reduce the device’s life.
Do not shake the device. Avoid brute force when installing or operating the device. The Pixel Bar
8 COB reacts very sensitive to movement.
Never use the device during thunderstorms, unplug the device immediately.
Only use device indoor, avoid contact with water or other liquids.
Do not touch the device’s housing bare-handed during its operation (housing becomes hot).
Only operate the device after having familiarized with its functions.
Avoid flames and do not put close to flammable liquids or gases.
Always keep case closed while operating.
Always allow free air space of at least 50 cm around the unit for ventilation.
Always disconnect power from the mains, when device is not used or before cleaning! Only
handle the power-cord by the plug. Never pull out the plug by tugging the power-cord.
Make sure that the device is not exposed to extreme heat, moisture or dust.
Only install the device with the hanging-bracket.
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power-cord is never crimped or damaged. Check the device and the power-
cord from time to time.
If the external cable is damaged, it has to be replaced by a qualified technician.
If the lens or glass is obviously damaged, it has to be replaced. So that its functions are not
impaired, due to cracks or deep scratches.
If device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do
not switch it on immediately. The arising condensation water might damage your device. Leave
the device switched off until it has reached room temperature.
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
For adult use only. Lighteffect must be installed out of the reach of children. Never leave the unit
running unattended.
For replacement use fuses of same type and rating only.
Allow time to cool down, before replacing lamp.
The user is responsible for correct positioning and operating of the Pixel Bar 8 COB . The
manufacturer will not accept liability for damages caused by the misuse or incorrect installation
of this device.
This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
During the initial start-up some smoke or smell may arise. This is a normal process and does not
necessarily mean that the device is defective.
Repairs, servicing and electric connection must be carried out by a qualified technician.
WARRANTY: Till one year after date of purchase.
CAUTION ! EYEDAMAGES !.
Avoid looking directly into the light source.
(meant especially for epileptics) !

4
Operating Determinations
•This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
•The minimum distance between light-output and the illuminated surface must be more than 0.5 meter.
•The maximum ambient temperature ta= 45°C must never be exceeded.
•The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
•If this device is operated in any other way, than the one described in this manual, the product may
suffer damages and the warranty becomes void.
•Any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all other
safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
If the Pixel Bar 8 COB is lowered from the ceiling or high joists, professional trussing systems have to
be used.
Use a clamp to mount the Pixel Bar 8 COB , with the mounting-bracket, to the trussing system.
The Pixel Bar 8 COB must never be fixed swinging freely in the room.
The installation must always be secured with a safety attachment, e.g. an appropriate safety net
or safety-cable.
When rigging, derigging or servicing the device, always make sure, that the area below the
installation place is blocked and staying in the area is forbidden.
Improper installation can cause serious damage to people and property !
Connection with the mains
Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
FASE
N
BLUE
BLACK
SILVER
NUL
YELLOW/GREEN
GREEN
GREEN
EARTH
Make sure that the device is always connected properly to the earth!

5
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail [e-mail] and request an RMA prior to shipping the fixture.
Be prepared to provide the model number, serial number and a brief description of the cause for the
return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the
customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
1) Your name
2) Your address
3) Your phone number
4) A brief description of the symptoms
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any short-
comings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
otherwise agreed in writing.
Complaints against us must be made known in writing or by fax within 10 working days after receipt of the
invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement of which the obligation is resulting.

6
Description of the device
Features
The Showtec Pixel Bar 8 COB is a light effect with high output and great effects.
designed for indoor use.
•Very powerful batten which uses the latest technology COB RGB Leds.
•Due to this new technology it is possible to achieve a very high light output with a wide beam angle,
without getting a lot of uncomfortable glare.
•The advanced menu makes it possible to control the batten in different modes such as DMX, stand
alone, music.
•Input-voltage: 100~240VAC...50/60Hz
•Power: 120W @FO
•IP Rating: IP20
•Refreshrate: 7,8 KHz
•Beam Angle: 60° degrees
•Lux (@ 2 meter): Red: 300
Lux (@ 2 meter): Green: 340
Lux (@ 2 meter): Blue: 410
Lux (@ 2 meter): Full: 1050
•Max. distance: 15m
•Colour range: 16,7 million additive colors
•LED Quantity: 8x 15W COB RGB LED
•Drive current: 500mA
•Display: LED display for auto and custom control
•Control: DMX-512, Auto Program, Master/Slave
•DMX Channels: 2,3, 5, 6, 12, 24CH
•Dimmer: 0-100%
•Strobe: 0-20Hz
•Colour: Black
•Cooling: Forced Cooling
•Fuse 2A/250V
•Dimensions: 735 x 110 x 85 mm (LxWxH) excl. brackets
•Weight: 4 kg
Overview 1
Fig. 1
1) 8x 15W COB RGB LED
Backside
2 3 4 5 6
Fig. 2
2) IEC Powerconnector In + Fuse 2A/250V 5) DMX IN
3) IEC Powerconnector Out 6) DMX OUT
4) LCD Display + Menu Buttons

7
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Remove all packing materials from the Pixel Bar 8 COB . Check that all foam and plastic padding is
removed.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Control Modes
There are 6 Modes: 1) Auto Run
2) Built-in Programs
3) Static Color
4) Sound-controlled
4)Master/Slave
6) DMX512
One Pixel Bar (Built-in Programs 1-24, Auto Program, Static Color)
1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
2. Plug the end of the electric mains power cord into a proper electric power supply socket.
3. When the Pixel Bar is not connected by a DMX-cable, it functions as a stand-alone device. Please see
page 13 for more information about the Auto Run programs.
One Pixel Bar (Sound control)
1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
2. Plug the end of the electric mains power cord into a proper electric power supply socket.
3. When the Pixel Bar is not connected by a DMX-cable, it functions as a stand-alone device.
If the device is set to (Audio), then the fixture will react to the beat of the music.
Please see page 13 for more information about the sound-control options.
Multiple Pixel Bars (Master/Slave control)
1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
2. Use a 3-p XLR cable to connect the Pixel Bar.
The pins: 1. Earth
2. Signal -
` 3. Signal +
3. Link the units as shown in (Fig. 3), Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second, third, and fourth units. You can
use the same functions on the master device as described on page 13 (Built-in Programs or Auto
Run). This means on the master device you can set your desired operation Mode and all slave
devices will react the same as the master device.
Multiple Pixel Bars (Master/Slave control)
Fig. 3

8
Multiple Pixel Bars (DMX Control)
1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
2. Always use a safety cable (ordercode 70140 / 70141).
3. Use a 3-p XLR cable to connect the Pixel Bars and other devices.
4. Link the units as shown in (figure 4), Connect a DMX signal cable from the first unit's DMX "out" socket
to the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.
5. Supply electric power: Plug electric mains power cords into each unit's IEC socket, then plug the
other end of the mains power cord into proper electric power supply sockets, starting with the first
unit. Do not supply power before the whole system is set up and connected properly.
Multiple Pixel Bars DMX Set Up
Fig. 4
Note : Link all cables before connecting electric power

9
Fixture Linking
You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to
run synchronized shows on two or more fixtures set to a master/slave operating mode. The combined
number of channels required by all the fixtures on a serial data link determines the number of fixtures the
data link can support.
Important: Fixtures on a serial data link must be daisy chained in one single line. To comply with the
EIA-485 standard no more than 30 devices should be connected on one data link.
Connecting more than 30 fixtures on one serial data link without the use of a DMX optically
isolated splitter may result in deterioration of the digital DMX signal.
Maximum recommended DMX data link distance: 100 meters
Maximum recommended number of Pixel Bars on a DMX data link: 30 fixtures
@ 220V: 9 units may be connected in series
@120V: 4 units may be connected in series
Data Cabling
To link fixtures together you must obtain data cables. You can purchase DAP Audio certified DMX cables
directly from a dealer/distributor or construct your own cable. If you choose to create your own cable
please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic
interference.
DAP Audio Certified DMX Data Cables
•DAP Audio cable for allround use. bal. XLR/M 3 p. > XLR/F 3 p.
Ordercode FL01150 (1,5m.), FL013 (3m.), FL016 (6m.), FL0110 (10m.), FL0115 (15m.), FL0120 (20m.).
•DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL71150 (1,5m.), FL713 (3m.), FL716 (6m.), FL7110 (10m.).

10
Control Panel
Fig. 5
A. LCD Display D. UP button
B. MODE Button E. DOWN button
C. SETUP button
DMX Control Mode
The fixtures are individually addressed on a data-link and connected to the
controller.
The fixtures respond to the DMX signal from the controller.
DMX Addressing
The control panel on the front side of the Pixel Bar allows you to assign the DMX fixture address, which is
the first channel from which the Pixel Bar will respond to the controller.
Please note when you use the controller, the unit has 24 channels.
When using multiple Pixel Bars, make sure you set the DMX addresses right.
Therefore, the DMX address of the first Pixel Bar should be 1(A001); the DMX address of the second Pixel
Bar should be 1+24=25 (025); the DMX address of the third Pixel Bar should be 25+24=49 (049), etc. Please,
be sure that you don’t have any overlapping channels in order to control each Pixel Bar correctly.
If two or more Pixel Bars are addressed similarly, they will work similarly.
Controlling:
After having addressed all Pixel Bar fixtures, you may now start operating these via your lighting
controller.
Note: After switching on, the Pixel Bar will automatically detect whether DMX 512 data is received or not.
If there is no data received at the DMX-input, the problem may be:
•The XLR cable from the controller is not connected with the input of the Pixel Bar.
•The controller is switched off or defective, the cable or connector is detective, or the signal wires are
swapped in the input connector.
Note: It’s necessary to insert a XLR termination plug (with 120 Ohm) in the last fixture in order to ensure
proper transmission on the DMX data link.

11
Menu Overview
1. DMX Address
2. Slave
3. Static Colors
4. Built-in Programs
5. Auto Program
6. Sound-controlled

12
Main Menu Options
DMX address
Master/Slave
Static Colors
Built-in Programs
Auto
Sound-controlled
The Pixel Bar 8 COB will only show its version number at start-up !
1. DMX Mode
With this menu you can set the DMX address.
1) Press the MODE button, until the display shows .
2) You can choose 512 different DMX addresses.
Use the Up / Down buttons to select the required address from .
3) Press Setup to select the number of channels, you want to use.
You can choose 6 different channel settings.
Use the Up / Down buttons to scroll through the menu.
2. Slave Mode
With this menu you can set the device to slave mode.
1) Press and hold down the MODE button on the device for 3 seconds at a time, until the display.
Shows .
2) The device is a slave device. It will now react the same as its master.

13
3. Static Color Mode
1) Press the MODE button on the device, until the display shows .
2) Use the UP/DOWN buttons to change the static colors (Red, Green, Blue). Press MODE to go 1 step
back.
You can combine RED, GREEN and BLUE to create an infinite range of colors (0-255).
Red
Set the value of the red LEDs (0-255).
Green
Set the value of the green LEDs (0-255).
Blue
Set the value of the blue LEDs (0-255).
4. Built-in Programs
With this menu you can set the Built-in Programs.
1) Press the MODE button on the device, until the display shows .
2) With this menu you can set the Built-in Program Mode of the Pixel Bar.
You can choose 24 built-in programs , by using the Up / Down buttons.
3) Press Setup to enter the built-in programs Menu. You can choose 2 different sub menus:
Speed from 01-99 and FL
Flash Frequency from 00-99 and FL
4) Use the SETUP button to scroll through the menu.
5) Use the Up / Down buttons to change the value.
5. Auto Run Programs
1) Press the MODE button on the device, until the display shows .
2) With this menu you can set the Auto Mode of the Pixel Bar.
3) Press Setup to enter the AUTO Menu. You can choose 3 different sub menus.
Speed from 01-99 and FL
Flash Frequency from 00-99 and FL
Number of Loops from 01-100
4) Use the SETUP button to scroll through the menu.
5) Use the Up / Down buttons to change the value.
6. Sound control Mode
1) Press the MODE button on the device, until the display shows .
2) Turn on the music and the Pixel Bar will react to the beat of the music.
3) Press the Up/Down buttons to adjust the sound sensitivity level from SU.00 -SU.31.
00 being the least sensitive and 31 being the most sensitive.

14
DMX Channels
2 Channels
Channel 1 Built-in Programs
0
Off
1-7
Red
8-15
Red + Green
16-23
Green
24-31
Green + Blue
32-39
Blue
40-47
Red + Blue
48-55
Red + Green + Blue
56-63
Program 1
64-71
Program 2
72-79
Program 3
80-87
Program 4
88-95
Program 5
96-103
Program 6
104-111
Program 7
112-119
Program 8
120-127
Program 9
128-135
Program 10
136-143
Program 11
144-151
Program 12
152-159
Program 13
160-167
Program 14
168-175
Program 15
176-183
Program 16
184-191
Program 17
192-199
Program 18
200-207
Program 19
208-215
Program 20
216-223
Program 21
224-231
Program 22
232-239
Program 23
240-247
Program 24
248-255
Sound-controlled Mode
Channel 2 –No function (when CH1 is set to 0 )
Channel 2 –Speed (when CH1 is set between 56-247 )
0-255
Speed from slow to fast
Channel 2 –Audio Sensitivity (when CH1 is set between 248-255 )
0-255
Audio sensitivity from less sensitive to highly sensitive

15
3 Channels
Channel 1 –Red
0-255
Gradual adjustment Red from 0 –100%
Channel 2 –Green
0-255
Gradual adjustment Green from 0 –100%
Channel 3 –Blue
0-255
Gradual adjustment Blue from 0 –100%
5 Channels
Channel 1 –Red
0-255
Gradual adjustment Red from 0 –100%
Channel 2 –Green
0-255
Gradual adjustment Green from 0 –100%
Channel 3 –Blue
0-255
Gradual adjustment Blue from 0 –100%
Channel 4 –Master Dimmer
0-255
Brightness from 0 to 100%
Channel 5 –Strobe
0
No function
1-255
Strobe effect, from slow to fast (0-20 flashes/sec.)
6 Channels
Channel 1 –Red, Block 1-4
0-255
Gradual adjustment Red from 0 –100%
Channel 2 –Green, Block 1-4
0-255
Gradual adjustment Green from 0 –100%
Channel 3 –Blue, Block 1-4
0-255
Gradual adjustment Blue from 0 –100%
Channel 4 –Red, Block 5-8
0-255
Gradual adjustment Red from 0 –100%
Channel 5 –Green, Block 5-8
0-255
Gradual adjustment Green from 0 –100%
Channel 6 –Blue, Block 5-8
0-255
Gradual adjustment Blue from 0 –100%

16
12 Channels
Channel 1 –Red, Block 1-2
0-255
Gradual adjustment Red from 0 –100%
Channel 2 –Green, Block 1-2
0-255
Gradual adjustment Green from 0 –100%
Channel 3 –Blue, Block 1-2
0-255
Gradual adjustment Blue from 0 –100%
Channel 4 –Red, Block 3-4
0-255
Gradual adjustment Red from 0 –100%
Channel 5 –Green, Block 3-4
0-255
Gradual adjustment Green from 0 –100%
Channel 6 –Blue, Block 3-4
0-255
Gradual adjustment Blue from 0 –100%
Channel 7 –Red, Block 5-6
0-255
Gradual adjustment Red from 0 –100%
Channel 8 –Green, Block 5-6
0-255
Gradual adjustment Green from 0 –100%
Channel 9 –Blue, Block 5-6
0-255
Gradual adjustment Blue from 0 –100%
Channel 10 –Red, Block 7-8
0-255
Gradual adjustment Red from 0 –100%
Channel 11 –Green, Block 7-8
0-255
Gradual adjustment Green from 0 –100%
Channel 12 –Blue, Block 7-8
0-255
Gradual adjustment Blue from 0 –100%

17
24 Channels
Channel 1 –Red, Block 1
0-255
Gradual adjustment Red from 0 –100%
Channel 2 –Green, Block 1
0-255
Gradual adjustment Green from 0 –100%
Channel 3 –Blue, Block 1
0-255
Gradual adjustment Blue from 0 –100%
Channel 4 –Red, Block 2
0-255
Gradual adjustment Red from 0 –100%
Channel 5 –Green, Block 2
0-255
Gradual adjustment Green from 0 –100%
Channel 6 –Blue, Block 2
0-255
Gradual adjustment Blue from 0 –100%
Channel 7 –Red, Block 3
0-255
Gradual adjustment Red from 0 –100%
Channel 8 –Green, Block 3
0-255
Gradual adjustment Green from 0 –100%
Channel 9 –Blue, Block 3
0-255
Gradual adjustment Blue from 0 –100%
Channel 10 –Red, Block 4
0-255
Gradual adjustment Red from 0 –100%
Channel 11 –Green, Block 4
0-255
Gradual adjustment Green from 0 –100%
Channel 12 –Blue, Block 4
0-255
Gradual adjustment Blue from 0 –100%
Channel 13 –Red, Block 5
0-255
Gradual adjustment Red from 0 –100%
Channel 14 –Green, Block 5
0-255
Gradual adjustment Green from 0 –100%
Channel 15 –Blue, Block 5
0-255
Gradual adjustment Blue from 0 –100%
Channel 16 –Red, Block 6
0-255
Gradual adjustment Red from 0 –100%

18
Channel 17 –Green, Block 6
0-255
Gradual adjustment Green from 0 –100%
Channel 18 –Blue, Block 6
0-255
Gradual adjustment Blue from 0 –100%
Channel 19 –Red, Block 7
0-255
Gradual adjustment Red from 0 –100%
Channel 20 –Green, Block 7
0-255
Gradual adjustment Green from 0 –100%
Channel 21 –Blue, Block 7
0-255
Gradual adjustment Blue from 0 –100%
Channel 22 –Red, Block 8
0-255
Gradual adjustment Red from 0 –100%
Channel 23 –Green, Block 8
0-255
Gradual adjustment Green from 0 –100%
Channel 24 –Blue, Block 8
0-255
Gradual adjustment Blue from 0 –100%