Shure MV5C User manual

MV5C
Home Office Microphone
The Shure USB home office microphone, MV5C, user guide.
Version: 4.0 (2022-L)

Shure Incorporated
2/11
Table of Contents
MV5C Home Office Microphone 3
General Description 3
Features 3
Quick Setup 3
Connections and Controls 3
Preset Modes 5
Placement 5
Adjusting Microphone Level 5
Adjusting Headphone Level 6
Accessing the Control Panel 6
Monitoring Options for the MV5C 6
Listening Through the Computer Output 6
Listening Through the Headphone Output (Direct Monitor
ing) 6
MV5 vs MV5C 7
Troubleshooting 7
System Requirements and Compatibility 8
Specifications 8
Accessories 10
Furnished Accessories 10
Certifications 10
Information to the user 10

Shure Incorporated
3/11
•
•
•
1.
2.
3.
4.
5.
MV5C
Home Office Microphone
General Description
The Shure MV5C microphone connects directly to a computer over a USB connection. Ideal for conferencing applications, the
MV5C features a preset speech mode for clear vocal reproduction.
Features
Convenient, Compact Design: This sleek and durable microphone mounts on the included MV5C desktop stand or any
stand with a 1/4" threaded adapter.
Plug and Play: The MV5C automatically becomes the active audio input device when plugged into a computer. The audio
output will remain the computer speakers or headphone output.
Preset Modes: Minimize setup time with the preset DSP mode designed to automatically adjust your gain, equalization
and compression for speech applications.
Quick Setup
Connect the microphone to your computer. Use the appropriate cable (USB-A or USB-C).
The center green status LED indicates a successful connection.
Confirm that the MV5C is the selected audio device.
Most computers automatically detect the MV5C and assign it as the primary audio device. If your computer settings de
fault to another device, open the sound control panel and select MV5C.
Note: The first time you connect to the MV5C, audio playback will remain assigned to the previously selected output. This means the microphone will
be enabled for audio input, but not output. Audio output will still come through your computer speaker or headphone output.
Hold the MODE button while plugging in the MV5C to enable the MV5C headphone output.
The MV5C headphone output is not enabled to ensure that your audio playback is not interrupted. However, to enable
the MV5C headphone output, hold the MODE button while you connect the MV5C. The headphone LED will turn green
to indicate that the headphone output is active.
Press the MODE button to toggle speech mode on and off.
Speech mode is a gain, compression and EQ preset designed to optimize voice tone and clarity. The green speech
icon LED indicates that speech mode is on.
In your conferencing application, select the MV5C as the input source.
See your software user guide for information on assigning input sources.
For more information about monitoring options, see the Monitoring Options for the MV5C section.

Shure Incorporated
4/11
Connections and Controls
①Mode Selection Button
Press to turn speech mode on and off.
②Mute Button
Press to mute the microphone input. All MV5C LEDs will turn red when microphone is muted.
③Headphone Volume Control
Adjusts the headphone volume when the MV5C headphone output is enabled.
④Headphone Output
Plug in any headphones with a 3.5 mm (1/8 inch) connector.
⑤Micro USB Port
Use the appropriate cable (USB-A or USB-C) to connect the MV5C to a computer.
⑥Monitor Indicator (Headphone LED)
LED Behavior Status
Green Headphone output is enabled. Direct monitoring is on.
Red Headphone output is enabled. Direct monitoring is off.
Off Headphone output is disabled.
Note: Direct monitoring refers to listening to playback through the MV5C headphone output.
⑦Status Indicator
LED Behavior Status
Green Active USB connection
Red (all 3 LEDs) Muted

Shure Incorporated
5/11
⑧Speech Mode
The LED indicator illuminates when speech mode is selected.
Preset Modes
These selectable modes adjust settings for gain, equalization, and dynamics to bring out the best sound characteristics for your
voice recording needs.
Mode Application Characteristics
Speec
h
Use for speech or vocals
in conferencing applica
tions
A mix of preset gain, compression and EQ processing that optimizes the sound of
your voice for clarity. A de-esser reduces sibilance (the harsh sound that occurs
when words with an "S" are spoken).
Flat Suited for any application A completely unprocessed signal (no equalization or compression settings used).
Adds flexibility when processing the audio after recording.
Placement
For conferencing applications, place the MV5C 12-18 inches (30-46 cm) away from your face and select speech mode. For
best results, place the microphone just to the left or right of your keyboard with the circular Shure logo pointed towards your
mouth. This properly orients the microphone for optimal sound pickup.

Shure Incorporated
6/11
•
•
1.
2.
3.
1.
2.
3.
Adjusting Microphone Level
Microphone level (gain) typically does not need adjustment when using the microphone with a conferencing platform. However,
if you hear distortion or the audio is too low, adjust the microphone level in the audio or sound control panel of your computer.
Keep the following in mind:
Set the microphone level before adjusting headphone volume.
The headphone volume does not affect the signal level sent to the computer.
Adjusting Headphone Level
Easily adjust the headphone monitoring level by using the MV5C thumbwheel by enabling the MV5C headphone output.
Accessing the Control Panel
Windows
Open the Settings window, select System > Sound.
Select Shure MV5C as your input device.
Adjust the gain by using the Levels slider.
Mac
In System Preferences, select Sound.
Select the Shure MV5C device as your Input and Output source.
Use the Input volume slider to adjust the gain.
Monitoring Options for the MV5C
Listening Through the Computer Output
Connect the MV5C to your computer using the USB cable and listen through your computer’s built-in speakers or
headphone output. If you are listening to computer audio playback, the headphone LED on the MV5C will be off because the
headphone output is off.
Listening Through the Headphone Output (Direct Monitoring)
When the MV5C headphone output is enabled, the headphone jack provides an equal blend of the direct microphone signal
(your voice) and audio playback from the computer (your conference). This allows you to conveniently adjust the headphone
volume for both with one control, the MV5C thumbwheel.
®

Shure Incorporated
7/11
Press and hold the MV5C Mode button while connecting to your computer using the USB cable. Now connect head-
phones to the MV5C headphone output to hear the audio playback. If you are listening to audio from the headphone out
put, the headphone LED on the MV5C will be green.
To turn off headphone audio, press and hold the MV5C mode button. The headphone LED will turn amber.
Tip: When first connecting the microphone to your computer, make sure to raise the volume level in the sound control panel of
the computer for a strong audio signal. Then adjust headphone level for comfortable monitoring.
MV5 vs MV5C
Troubleshooting
Issue Solution
The middle LED does not illu-
minate Make sure that the MV5C is fully plugged in.
Audio is too low Check the computer sound control panel settings. When first connecting the MV5C to
your computer, make sure to raise the computer volume level.
Audio sounds bad Check the sound control panel of the computer to ensure that the MV5C is fully plugged
in and selected as your audio device.
Audio is distorted Use the audio meter to ensure that volume peaks are within the target range. If level is
reaching the top of the input meter, turn the gain down.
Device not working with USB
hub.
The MV5C requires 250 mA per port. Check USB hub documentation for current/port
specification.
General troubleshooting Quit and re-start your app.
Reboot the computer.
Note: Contact Shure Service and Repair if you continue to experience any issues.

Shure Incorporated
8/11
System Requirements and Compatibility
Windows
Windows 7 and higher
Minimum RAM = 64 MB
USB 2.0
Macintosh
OS X Lion 10.7 and higher
Minimum RAM = 64 MB
USB 2.0
Specifications
DSP Modes (Presets)
Speech/Flat
Cartridge Type
Electret Condenser (16 mm)
Polar Pattern
Unidirectional (Cardioid)
Bit Depth
16-bit/24-bit
Sampling Rate
48 kHz
Frequency Response
20 Hz to 20,000 Hz
Adjustable Gain Range
0 to +36 dB
Sensitivity
40 dBFS/Pa at 1 kHz[1] [2}
Maximum SPL
130 dB SPL [2]
Headphone Output
3.5 mm (1/8″)

Shure Incorporated
9/11
Power Requirements
Powered through USB connector
Mute Switch Attenuation
Yes
Mounting Stand
Included
Stand Adapter
1/4 inch 20 thread (standard tri-pod mount)
Housing
PC/ABS
Net Weight
Without Mounting Stand 0.09 kg (3.17oz.)
With Mounting Stand 0.16 kg (5.64oz.)
Dimensions
66 x 67 x 65 mm H x W x D
Dimensions with Stand
89 x 142 x 97 mm H x W x D
Cable
1 m USB-A cable/1 m USB-C cable
[1] 1 Pa=94 dB SPL
[2]At Minimum Gain, Flat Mode
Polar Pattern

Shure Incorporated
10/11
•
•
•
•
1.
2.
Frequency Response
Accessories
Furnished Accessories
MV5 Desktop Stand AMV5-DS
1 m USB cable AMV-USB
1 m USB-C cable 95C38076
Certifications
Information to the user
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the manufacturer's instruction manual, may cause interference with radio and television reception.
Notice: The FCC regulations provide that changes or modifications not expressly approved by Shure Incorporated could void
your authority to operate this equipment.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip
ment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc
tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be de
termined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.
Industry Canada ICES-003 Compliance Label: CAN ICES-3 (B)/NMB-3(B)
Note: Testing is based on the use of supplied and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC per
formance.

Shure Incorporated
11/11
CE Notice:
Hereby, Shure Incorporated declares that this product with CE Marking has been determined to be in compliance with Euro
pean Union requirements. The full text of the EU declaration of conformity is available at the following site: https://
www.shure.com/en-EU/support/declarations-of-conformity.
Authorized European Importer / Representative:
Shure Europe GmbH
Department: Global Compliance
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: [phone]
Fax: [phone]
Email: [email protected]
This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking.
Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s)
identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible
for the operation of this device or its compliance with safety and regulatory standards.
Apple, iPad, iPhone, iPod and Lightning are trademarks of Apple Inc., registered in the U.S. and other countries. tvOS is a
trademark of Apple Inc. The trademark “iPhone” is used in Japan with a license from Aiphone K.K.
Mac and Lightning are registered trademarks of Apple Inc.
®