Shure PG185 User manual

PG185 Lavalier Wireless Microphone
©2006
Shure Incorporated
27EN8864A (Rev. 1)
The PG185 is an electret condenser
microphone for clip-on use with a
wireless bodypack transmitter.
20 200001000 1000050 100
98765432 98765432
+10
0
–10
Hz
dB
-20
+20
PG185 Frequency Chart
SHURE Incorporated http://www.shure.com
United States, Canada, Latin America, Caribbean:
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
Phone: [phone] U.S. Fax: [phone] Int’l Fax: [phone]
Europe, Middle East, Africa:
Shure Europe GmbH, Phone: [phone] Fax: [phone]
Asia, Pacific:
Shure Asia Limited, Phone: [phone] Fax: [phone]
N108
Eligible to bear CE marking. Conforms to European EMC Directive
89/336/EEC. Meets applicable tests and performance criteria in
European Standard EN 55103 (1996) parts 1 and 2, for residential
(E1) and light industrial (E2) environments.

PG185 Technical Specifications
Type Condenser, electret bias
Frequency Response 60Hz to 12,000Hz* (see Frequency Chart)
Polar Pattern Cardioid (unidirectional)
Output Impedance 1200Ω @1kHz*
Output Level -47dBV/Pa (4.5 mV)*
Signal to Noise Ratio 66dB, 1kHz at 1 Pa*
Maximum SPL 120dB
Dynamic Range
(max. SPL to A-weighted noise level)
92dB*
Output Noise 28dB (typical, A-Weighted)*
Recommended Operating Voltage +5VDC, 10V max (pin 2 to pin 1)
Polarity Positive sound pressure on diaphragm produces
positive voltage on pins 3 and 4 relative to pin 1
(ground) on the mini TA4F connector
Cable 1.22 m (48 in.) two-conductor shielded
Connector Mini TA4F
Net Weight 23 g (0.81 oz)
Replacement Parts Windscreen (2), Clothing clip...................RK323
*All measurements taken using RK183PK preamp set to 0dB gain
Wearing the microphone
uAttach the lavalier mic
about 15 - 25 cm (6 - 10 in.)
away from the mouth.
vConnect the mic cable
to the bodypack transmitter.
mute
Wiring Diagram
RED (to drain) (DC bias)
BLACK (to source) (audio)
SHIELD
CARTRIDGE TA4F CONNECTOR