Shure R183B Use and care manual

©2005 Shure Incorporated
27C2933 (Rev. 4)
REPLACEMENT
CARTRIDGE KITS
Printed in U.S.A.Printed in U.S.A.
REPLACEMENT CARTRIDGE KITS
R183B, R183W, R184B, R184W, R185B, AND R185W
GENERAL
Use the enclosed replacement cartridge with any Microflex®
microphone.
APPLICATIONS
R183 (Omnidirectional): Sound reinforcement, recording, or
remote monitoring applications. Low handling noise. Pickup angle
= 360°.
R184 (Supercardioid): Sound reinforcement applications requir-
ing high rejection of ambient noise and narrow pickup angle. Use of
windscreen highly recommended. Pickup angle (-3db) = 115
° .
R185 (Cardioid): Sound reinforcement applications requiring
good rejection of ambient noise. Use of windscreen highly recom-
mended. Pickup angle (-3db) = 130°.
(B=Black; W=White)
CHANGING CARTRIDGES
Simply unscrew the cartridge from the microphone base and re-
place it.
REMOVING A MICROPHONE CARTRIDGE
FIGURE 1
CHANGING CARTRIDGES IN MX300 SERIES
BOUNDARY MICROPHONES
Remove the top grille and unscrew the cartridge retaining brack-
et. Lift the adapter housing to replace the cartridge. See the users
guide that accompanied the microphone for details.
CARTRIDGE REPLACEMENT
FIGURE 2
For additional technical assistance, phone Shure at
1-847-600-8440. In Europe, phone [phone].
Trademark Notices: SHURE, the Shure logo, and
MICROFLEX are registered trademarks of Shure Incorporated.
CARTRIDGE
CABLE
BODY
ADAPTER HOUSING
BRACKET
CARTRIDGE