Siegenia DRIVE IO-Modul User manual
ASSEMBLY INSTRUCTIONS
DRIVE
IO-Modul
IO-Modul smart
Comfort systems
Door systems
Window systems
IO module the concealed tilt sash locking drive
DRIVE CL
for DRIVE CL Assembly instrucons
IO module/IO module smart
09.20212/16 H39.MOTS017EN-00
Content
1 INTRODUCTION.........................................3
1.1 Producer and service .................................... 3
............. 3
1.3 Intended use ................................................. 3
1.4 Improper use................................................. 3
1.5 Maintenance and service notes.................... 3
..... 3
1.7 Dimensions ................................................... 3
1.8 Symbols used ................................................ 3
........................ 4
1.10 Applicable documents................................... 4
1.11 Appropriate disposal..................................... 4
2 SAFETY.......................................................4
2.1 Structure of the warning notes..................... 4
2.2 Warning notes used ...................................... 4
2.3 Warning notes............................................... 5
3 INSTALLATION REQUIREMENTS................5
4 FUNCTIONS................................................5
4.1 IO module ..................................................... 5
4.2 IO module smart ........................................... 5
5 TECHNICAL SPECIFICATION.......................6
5.1 IO module ..................................................... 6
5.2 IO module smart ........................................... 6
6 OVERVIEW OF DRIVE CL............................6
7 DIMENSIONS, CONNECTIONS AND
OPERATING ELEMENTS ............................7
................... 7
................................................... 8
8 ASSEMBLY..................................................8
............................................. 8
......................................... 8
9 CABLE DIAGRAMS ....................................9
and power supply on the DRIVE CL............... 9
10
DRIVE CL on the IO-Modul/IO-Modul smart10
10 FUNCTIONAL PRINCIPLE MENU
NAVIGATION............................................11
11 COMMISSIONING....................................12
11.1 Coupling IO module/IO module smart
with DRIVE CL.............................................. 12
11.2 Install SIEGENIA Comfort app...................... 13
11.3 Integrate DRIVE CL and IO module smart
in home WIFI............................................... 13
11.4 Operate DRIVE CL and IO module smart
in standalone mode .................................... 14
12 RECTIFICATION OF MALFUNCTIONS.......14
13 EU DECLARATION OF CONFORMITY
WITH REGARD TO CE MARKING .............15
3/16
Assembly instrucons for DRIVE CL
IO module/IO module smart
3/1609.2021H39.MOTS017EN-00
1 Introducon
begin the assembly work. Observe the notes in Chapter
module/IO module smart and must be accessible to the
1.1 Producer and service
KFV Karl Fliether GmbH & Co. KG
A company of the SIEGENIA GROUP
Siemensstraße 10
42551 Velbert
Tel.: +49 2051 278-0
Fax: +49 2051 278-167
E-mail: info@kfv.de
Please contact your contractual partner in case of
1.2 Target group of this documentaon
specialist companies. All work described in this
document is to be performed only by experienced
maintenance of electromechanical components.
Work on a 230 V AC mains power supply may only be
1.3 Intended use
• The IO module/IO module smart serves as an
DRIVE CL.
• The IO module/IO module smart is intended for
indoor use (IP20) with a room temperature of 0°C
mounted boxes or surface mounted in approved
branch boxes.
•
• Use the IO module/IO module smart only when it is
• Repair of the IO module/IO module smart is not
permissible. The IO module/IO module smart must
be replaced in case of faults.
1.4 Improper use
• The IO module smart must not be installed in a
WIFI signal.
• The IO module/IO module smart must not be used
in event of air humidity > 80 %. The device is not
approved for use in swimming pools and/or wet
• The IO module/IO module smart and its connected
electromechanical components must not be
1.5 Maintenance and service notes
Never use cleaning agents that are aggressive or
contain solvents. This could damage the surfaces of the
components.
1.6 Installaon condions and requirements
1.7 Dimensions
All measurements are given in mm.
1.8 Symbols used
The following pictograms are used in this document:
general warning symbol
the corresponding point
for DRIVE CL Assembly instrucons
IO module/IO module smart
09.20214/16 H39.MOTS017EN-00
1.9 Other types of presentaons
their meanings:
• Items of text following this marker are found in lists.
– Items of text following this marker are found in
subordinate lists.
fItems of text with this marking in front of them are
order.
Cross reference
brackets.
1.10 Applicable documents
components.
1.11 Appropriate disposal
Electrical devices should not be disposed of as house-
to an environmentally-friendly recycling facility.
2 Safety
• All work on the 230 V AC mains power supply
must be carried out in compliance with the current
•
•
•
electronics.
2.1 Structure of the warning notes
•
•
•
•
• show measures to prevent danger and prohibit
The warning notes are set up according to the following
principle:
SIGNAL WORD
Type and source of danger
•
due to electric shock.
2.2 Warning notes used
DANGER
The signal word "Danger" designates an immediately
WARNING
CAUTION
NOTE
these notes prevents damage to the components.
This symbol indicates special features and designates
5/16
Assembly instrucons for DRIVE CL
IO module/IO module smart
5/1609.2021H39.MOTS017EN-00
4 Funcons
4.1 IO module
•
locking drive DRIVE CL
•
•
•
•
•
4.2 IO module smart
• Extension of the WIFI-capable control for the
SIEGENIA Comfort app
(available free of charge from Google Play Store or
Apple App Store)
•
locking drive DRIVE CL
•
•
•
•
•
•
•
•
2.3 Warning notes
DANGER
Risk of fatal injury from electric shock
Exposed electrical components
• All work on a 230 V AC mains power supply may only be
If energy-carrying cables are routed in parallel to data
g. in the speed of the data transmission.
3 Installaon requirements
•
• The IO module/IO module smart should be installed
to be as free from interference as possible. The
– water pipes
–
–
–
– WIFI networks on the same wireless channels (e.
g. the neighbour's WIFI router)
– Non CE-conformant electrical consumers such as
for DRIVE CL Assembly instrucons
IO module/IO module smart
09.20216/16 H39.MOTS017EN-00
5 Technical specicaon
5.1 IO module
name Data
Supply voltage 19 V DC to 32 V DC
Power consumpon 1.2 W
Protecon class III
Protecon type IP20
Operang temperature range 0° C to 45° C
Switching current output max. < 1000 mA
Switching voltage output 24 V DC
5.2 IO module smart
name Data
WIFI radio frequency (oponal)
Supply voltage 19 V DC to 32 V DC
Power consumpon 1.2 W
Protecon class III
Protecon type IP20
Operang temperature range 0° C to 45° C
Switching current output max. < 1000 mA
Switching voltage output 24 V DC
6 Overview of DRIVE CL
DRIVE CL
AnalogueSI-BUS
+24 V
–
OUT 2
OUT 1
IN 2
IN 1
7/16
Assembly instrucons for DRIVE CL
IO module/IO module smart
7/1609.2021H39.MOTS017EN-00
7 Dimensions, connecons and operang elements
IO module/IO module smart
21
6 3 4
5
Item name
1
2 Status LED
3 Menu LED
4 WIFI LED (only for IO WIFI module)
5
6
7.1 12-pin connecon terminal strip
Connecon for Funcon
1 / 2
3 / 4
5 / 6
7 / 8
9 / 10
11 24 V DC (-) IN
12 24 V DC (+) IN
for DRIVE CL Assembly instrucons
IO module/IO module smart
09.20218/16 H39.MOTS017EN-00
7.2 Terminaon
1.
free SI-Bus bushing.
8 Assembly
8.1 Flush mounng
1.
2.
8.2 On-wall mounng
1.
the two brackets on the wall.
9/16
Assembly instrucons for DRIVE CL
IO module/IO module smart
9/1609.2021H39.MOTS017EN-00
9 Cable diagrams
WARNING
Risk of fatal injury from electric shock
Exposed electrical components.
•
• All work on the 230 V AC mains power supply must be carried out in compliance with the current German VDE
drive DRIVE CL.
9.1 Connecon IO-Modul/IO-Modul smart and power supply on the DRIVE CL
+24 V
–
OUT 2
OUT 1
IN 2
IN 1
+
24 V
–
N
L
PE
+24 V
–
1
2
3
4
5
6
7
8
9
10
Input 1
Input 2
Out 1
Out 2
Out 3
DRIVE CL
IO-Modul
Power supply
for DRIVE CL Assembly instrucons
IO module/IO module smart
09.202110/16 H39.MOTS017EN-00
9.2 Connecon IO-Modul/IO-Modul smart, power supply and buons on the DRIVE CL
+24 V
–
OUT 2
OUT 1
IN 2
IN 1
+
24 V
–
N
L
PE
S2
1
3
+
–
4
3
2
1
S1
1
3
+24 V
–
1
2
3
4
5
6
7
8
9
10
Input 1
Input 2
Out 1
Out 2
Out 3
S1 = locking
S1 + S2 = turning open
with 1 second
DRIVE CL
IO-Modul
Power supply
9.3 Connecon power supply, buons and DRIVE CL on the IO-Modul/IO-Modul smart
S1 = locking
S1 + S2 = turning open
with 1 second
+24 V
–
OUT 2
OUT 1
IN 2
IN 1
+
24 V
–
N
L
PE
S2
1
3
S1
1
3
+24 V
–
1
2
3
4
5
6
7
8
9
10
Input 1
Input 2
Out 1
Out 2
Out 3
DRIVE CL
IO-Modul
Power supply
11/16
Assembly instrucons for DRIVE CL
IO module/IO module smart
11/1609.2021H39.MOTS017EN-00
10 Funconal principle menu navigaon
1.
(menu LED lights up in 1 colour).
+24 V
–
1
2
3
4
5
6
7
8
9
10
Input 1
Input 2
Out 1
Out 2
Out 3
2.
+24 V
–
1
2
3
4
5
6
7
8
9
10
Input 1
Input 2
Out 1
Out 2
Out 3
3 s
3.
+24 V
–
1
2
3
4
5
6
7
8
9
10
Input 1
Input 2
Out 1
Out 2
Out 3
4.
+24 V
–
1
2
3
4
5
6
7
8
9
10
Input 1
Input 2
Out 1
Out 2
Out 3
3 s
5.
for DRIVE CL Assembly instrucons
IO module/IO module smart
09.202112/16 H39.MOTS017EN-00
11 Commissioning
11.1 Coupling IO module/IO module smart with DRIVE CL
Both devices must be coupled to use the IO module/
sash locking drive DRIVE CL.
1.
LED lights up light red.
+24 V
–
1
2
3
4
5
6
7
8
9
10
Input 1
Input 2
Out 1
Out 2
Out 3
2.
+24 V
–
1
2
3
4
5
6
7
8
9
10
Input 1
Input 2
Out 1
Out 2
Out 3
3 s
3.
+24 V
–
1
2
3
4
5
6
7
8
9
10
Input 1
Input 2
Out 1
Out 2
Out 3
3 s
4.
The drive beeps parallel to this.
MENUE STATUS
10x
5.
coupled.
-
formed on the DRIVE CL.
13/16
Assembly instrucons for DRIVE CL
IO module/IO module smart
13/1609.2021H39.MOTS017EN-00
11.2 Install SIEGENIA Comfort app
1. Install the SIEGENIA Comfort app
on your mobile device (e. g.
smartphone or tablet).
SIEGENIA Comfort App as a free
download in your app store:
Due to the wide range of
cannot guarantee that the
SIEGENIA Comfort App will
and tablets.
11.3 Integrate DRIVE CL and IO module smart in
home WIFI
1.
2. Select the coupled DRIVE CL as
WIFI
CL_10b004
The mobile device connects
of the coupled DRIVE CL.
3. Open SIEGENIA Comfort app
4.
Device found
Would you like to add the device?
Yes
5. Select DRIVE CL
CL 10b004
6.
Inial conguraon
Yes
7. Enter user admin
password 0000.
admin
0000
Next step
8.
Next step
9.
Wi-Fi networks
Next step
Login data
WIFI name
password Enter password
Repeat
password
Repeat password
Next step
10.
WIFI name
password
Repeat
password
Next step
11.
Next step
12.
WIFI name
password
DHCP
Integrate device
13.
Restart device
You will be forwarded to the device
overview
14.
15.
your mobile device.
16.Open SIEGENIA Comfort app.
17.Select DRIVE CL.
CL_10b004
18.Enter user admin
password 0000
admin
0000
Cancel OK
* The term „Home WIFI“ serves as a
placeholder for your own WIFI network.
The name of your WIFI network should,
however, appear at this point.
for DRIVE CL Assembly instrucons
IO module/IO module smart
09.202114/16 H39.MOTS017EN-00
11.4 Operate DRIVE CL and IO module smart in standalone mode
device itself provides a WIFI network.
This mode should only be selected if
there is no WIFI network within reach
that can be used to integrate the
device.
1.
2. Select the coupled DRIVE CL as
WIFI
CL_10b004
The mobile device connects
of the coupled DRIVE CL.
3. Open SIEGENIA Comfort app
4.
Device found
Would you like to add the device?
Yes
5. Select DRIVE CL
CL 10b004
6.
Inial conguraon
Yes
7. Enter user admin
password 0000.
admin
0000
Next step
8. Select standalone mode.
Standalone mode
Next step
9. Assign new password.
password
Repeat
password
Weak Medium Strong
Next step
10.
WIFI name
password
Integrate device
11.
Restart device
You will be forwarded to the device
overview
12.
13.
network and enter password
device.
14.Open SIEGENIA Comfort app.
15.Select DRIVE CL.
CL_10b004
16.Enter user admin
password 0000
admin
0000
Cancel OK
12 Reccaon of malfuncons
Tel. +49 271 3931-0.
15/16
Assembly instrucons for DRIVE CL
IO module/IO module smart
15/1609.2021H39.MOTS017EN-00
13 EU Declaraon of Conformity with regard to CE marking
a)
EN 301 489-1 V1.9.2
EN 301 489-17 V2.2.1
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 61000-6-1:2007
EN 61000-6-2:2005 (Part)
EN 61000-6-3:2007+A1:2011
b)
DIN EN 60730-1:2012-10
c) 2011/65/EU RoHs
KFV Karl Fliether Gmbh & Co. KG
Siemensstr. 10
Uwe Ziewers
(Site Manager)
Other manuals for DRIVE IO-Modul
1
This manual suits for next models
1
Table of contents
Other Siegenia Control Unit manuals
Popular Control Unit manuals by other brands
DMP Electronics
DMP Electronics 734 Installation and programming guide
Epson
Epson RX4111CE Applications manual
VAT
VAT 110 Series Installation, operating, & maintenance instructions
DMP Electronics
DMP Electronics 716 installation guide
Siemens
Siemens SIMATIC FM 351 Getting started
Accutrol
Accutrol AccuValve AVC4000 Installation & operation manual
