Siemens INFINITI Pro User manual

INFINITI Pro
User Guide
In-the-Ear Instruments
Siemens Hearing Solutions
s

2
A friendly guide to your
new Siemens
hearing instruments
Congratulations!
You have decided in favour of hearing instruments from
Siemens.You have taken an important step towards being
able to hear better.
From now on, your new hearing instruments will be your
constant companions.You will profit from our many years of
research and experience in microelectronics. Soon it will be
easy for you to hear again. Good hearing is an important
requirement for your physical well being.Your new hearing
instruments will help you actively participate with pleasure
in the world of language and music again.
And as with any constant companion, you’ll need some time
at first to get used to handling your hearing instruments.
With a little patience, we trust that your new hearing
experience will be all the more pleasant for you.
These user guide should help you build friendship quickly
with your new partners in matters relating to better hearing.
We want to help you to handle your hearing instruments
correctly, so that they will become an important part of your
life.
Wishing you much success,
Your Siemens team

How your hearing instruments look like Page 4
How to insert your In-the-Ear hearing instruments Page 5
How to remove the instruments from your ear Page 6
Switching the instrument on / off Page 6/10
Battery changing Page 7
Your battery type Page 8
Handling batteries Page 9
Hearing instruments with a program button Page 10
Program overview Page 10
Hearing instruments with telecoil Page 11
Hearing instruments with 2 microphones Page 11
Hearing instruments with volume control Page 12
Tips for cleaning and care Page 13
The best way to handle your hearing instruments Page 15
How you can help yourself Page 17
Hearing training made easy Page 19
3
In this short guide you’ll find instructions about inserting,
placing and adjusting your INFINITI Pro hearing instruments.
There are also tips and information on correct handling,
cleaning, care and battery changing. And naturally information
about how you can help yourself if you cannot visit a hearing
instrument specialist immediately.
One important note:Your hearing success depends
largely on how well your instruments fit in the ears and
how carefully you maintain and handle them.
The best way to use your
new hearing instruments
Contents

4
How your INFINITI Pro In-the-Ear
hearing instruments look like
Each hearing instrument can be identified by the serial
number, which is located on the outside of the instrument:
If the number is written in red, the hearing instrument is
for the right ear, and if the number is written in blue, this
hearing instrument is for the left ear.
Your hearing instruments are custom-made according to the
shape of your ears or ear canals.
Compare your hearing instruments with the following
diagrams.You will certainly recognize your hearing instrument
type, although the outer contours can vary.
1) Microphone
2) Second microphone
(option)
3) Battery compartment
4) Program button (option)
5) Volume control (option)
6) Vent
7) Removal cord
INFINITI Pro CT
INFINITI Pro IT
INFINITI Pro CICINFINITI Pro CS
5
3
6
1
12
4
5
3
6
1
5
3
6
1
3
76
4

5
How to insert your
In-the-Ear instruments
Hold your hearing instrument
between thumb and index
finger and carefully push the
instrument in the ear canal.
Now bring it into the correct
position by turning it slightly.
You may find it helpful to pull your
external ear slightly upwards or
to the rear.You may want to push
the instrument very gently with
your index finger. Once inserted,
you should feel that the hearing
instrument is correctly placed.
Now insert the other instrument
in the same way.
Tip:
Practice inserting your hearing instrument correctly.
One easy way to practice is to sit down at a table,
place a mirror in front of you and prop your
elbows on the table, so that you can move your
hands steadily and safely.This will help you to
stay comfortable and relaxed while you practice.

6
How to remove the instruments
from your ear
There are 2 ways to switch your instrument ON/OFF.
First way.
The battery compartment serves as an ON / OFF switch.
If you want to switch the instrument on, insert the battery
and simply close the battery compartment - the instrument
is now ready for use.
If you want to switch the instrument off, open the battery
compartment all the way.To make sure that the battery is
not being used unnecessarily, remove the battery from the
instrument.
Second way is by using the program button.
If the hearing instrument has already been operated it can
be switched off by pressing the program button for at least
2 sec.To switch it on again press the programm button for
at least 2 sec.The instrument diverts to programm “1”.
Every operation is acknowledged by beeps tones.
See chapter “Hearing instruments with program button”.
Switching the instrument on/off
Pull on your ear lobe to loosen
the instrument in your auditory
canal.You can now remove the
instrument, using the thumb and
index finger of your other hand.
You can use the tip of your finger
to push a small instrument out
from the auditory canal. If you
can open the battery compart-
ment with your fingernail while
the hearing instrument is still in your ear, use the battery
compartment to pull the instrument out from the ear.
Even smaller hearing instruments (CICs) can be removed by
pulling the small removal cord while slightly pressing to the
side on the ear canal.

7
Battery changing
When inserting the battery please pay attention to the
plus side on the battery.
The plus (+) side of the battery is always the smooth
side.You can recognise the minus (–) side by the
coloured ring.
You should always keep spare batteries
at hand.
If you feel you cannot change the battery yourself, ask
someone to help you: a family member, friend or your
hearing instrument specialist.
Open the
battery
compartment
Insert the
battery
Close the
battery
compartment

8
Safety notes for batteries
WARNING
Keep batteries away from children!
Batteries must not be swallowed.
Remove the batteries when the instrument is not in
use over a prolonged period. Replace leaking batteries
without delay.
Do not throw away your dead batteries!
Return them to your hearing instrument specialist for
proper, environmentally conscious disposal.
Your battery type:
Your hearing instrument specialist will inform you which
hearing instrument and which battery type you need.
Hearing instrument Battery type
INFINITI Pro IT
INFINITI Pro CT
INFINITI Pro CS
INFINITI Pro CIC
312
312
A 10
A 10
13

9
Zinc-air batteries are used
today almost exclusively in
hearing instruments to
minimise environmental
damage.These batteries
require oxygen for operation,
which they absorb from the
air.The battery is activated as
soon as the protective foil is pulled off and is used up even
if you do not use your hearing instrument.
You should always pull off the protective foil only when you
actually use the battery. Also, do not leave the batteries in
your INFINITI Pro hearing instruments if you do not use them
over a longer period of time.The batteries can leak and dam-
age the instruments.The batteries can last for a few days
up to several weeks according to the way they are used.
You can recognise when a change of batteries becomes
necessary, because your hearing instruments become
noticeably quieter towards the end of the battery’s life.Then
it is time for new batteries.Two warning tones sound once
per minute indicating that you must insert a new battery.
1 min.
Your hearing instrument specialist can switch off the warning
tones if required.
Zinc-air batteries which are almost completely used up show
the following behaviour: After switched on the instruments
function normally, but then rapidly become quieter.The more
the battery is used up, the faster the gain falls off.You must
then replace such batteries by new ones.
Handling batteries

10
Hearing instruments with a
program button
If you have chosen INFINITI Pro
hearing instruments with a selection
of programs, then you can adapt
your hearing instruments to a
changed hearing situation by lightly
pressing the program button. For
example, this can help you to better
understand the person you are
talking to, even when there are
interfering background noises.
Use this push button to choose one of the programs. When
you change the program, signal tones confirm the change:
One signal tone, when you switch over to program 1.
Two signal tones, when you switch over to program 2 (option).
Three signal tones, when you switch over to program 3 (option).
Your hearing instrument specialist can turn off these acoustic
tones if you do not wish to hear them.
The program button also gives you the possibility to switch
your instrument ON/OFF. See chapter “Switching the instrument
ON/OFF.
Program overview
Your hearing instrument specialist can show you how to use
your hearing instruments systematically.
Hearing programs
1
2 (option)
3 (option)
Description of the hearing situation
Serial number (right hearing instr. / red)
Serial number (left hearing instr. / blue)
Tones